What type of Resin
 

What type of resin did Wellcraft use when they built the V20? Mines a 1980and there are several areas that I what to repair/modify and if I can get away with the polyester resin I will. I know that the polyester won't bond to epoxy but it will bond to itself.

Re: What type of Resin
 

2ndchance go with the epoxy. I don't know what Wellcraft used but the epoxy will give you the strongest secondary bond. (I slept at a Holiday), no from my research and Skools and Stinky input epoxy is your best bet. More dollars but a better bond. Billy Mac ;D

Re: What type of Resin
 

yeap best strength but can use boat yard if it's above water line ;D

Re: What type of Resin
 

Now you tell me ;). After I spent another C note on West System Epoxy for my fuel tank cover. Oh well its only money and the fuel tank cover does need to be strong. Here are some pics of the fuel tank cover being repaired. First I had to grind off what was left of the 48 plywood sqaures

http://i162.photobucket.com/albums/t...aft2207089.jpg

After grinding pic

http://i162.photobucket.com/albums/t...aft2207090.jpg

After a blowing off and a wipe down with acetone I mixed the West sys. epoxy and added the stuff to make a paste. Then I laid it out on my shed floor and spread the epoxy out and laid a solid peice of plywood down on it with 4 cinder blocks on top for weight. Aint no way I'm using 48 little sqaures of plywood.

http://i162.photobucket.com/albums/t...aft2207091.jpg

I'm going to let it cure over night and then glass the inside.

Re: What type of Resin
 

i did mine with epoxy on the wood to floor hatch but glassed over it with poly resin see mine in the project 21 under off topic section

Re: What type of Resin
 

Re: What type of Resin
 

Highly recommend you use epoxy. The best source that I have found is Progressive Epoxy Polymers, Inc. Visit: www.epoxyproducts.com March 5, 2007 purchased 1.5 gallon of their Basic No- Blush epoxy for $77.00 plus $16.57 shipping. Understand epoxy prices are going up very soon. This company also provides E-mail support.

If anyone knows of a cheaper source, please advise.

Re: What type of Resin
 

If you are concerned about gonding then go with epoxy, I rarely use it though die to expense. Fiberglass resin seems to have done ok for me so far. What kinda loot yall paying for epoxy resin? Just curious?


Good job so far on the hatch...lookin good. 8)

Re: What type of Resin
 

Hi Stink,

I have been paying the following for epoxy resins:

US Composites - www.shopmaninc.com

Resin Gallon
Hardener 42.6 OZ. $55

Geek

Re: What type of Resin
 

Sweet!

Looks like some good stuff! 8)


No offense, but I hope Im done with the raw material for awhile. Im really sick of it. ::)