Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Performance (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=15)
-   -   Who's run a 4 blade prop on their V ? (https://forums.wmpdevserver1.com/community/showthread.php?t=7341)

Airslot 05-22-2007 09:36 AM

Who's run a 4 blade prop on their V ?
 
I may be able to swap a guy for a 4 blade Merc Rev 4 17p. The deal would be right for me, cause its stuff I don't use anymore, and I can't beat the price. The Rev 4 is supposed to b e a great 4 blade prop from what I've read. Anybody have any 4 blade experience?

Thanks,

charlie_the_tuna 05-22-2007 11:12 AM

Re: Who's run a 4 blade prop on their V ?
 
y'know, i saw a 6 blade prop on ebay and almost bid on it.
i'm sure i dont need it but it sure did look cool.

macojoe 05-22-2007 12:15 PM

Re: Who's run a 4 blade prop on their V ?
 
Bigshrimp either uses one or know someone that does I thought?? He had posted it here some place among the mucK!!

Seacrets 05-22-2007 12:23 PM

Re: Who's run a 4 blade prop on their V ?
 
I run a 4 blade SS prop on my 2000 Merc 150 hp. It's the same one I ran on my 1985 Merc 150. I have clocked by GPS 44.6 MPH w/ two people and a full tank of fuel. The hole shot is much better that my three blade spare prop. Your top end may not be as good, but I do like the hole shot. It's a 17" pitch. Hope that helps.

sfprovyn 05-24-2007 01:36 AM

Re: Who's run a 4 blade prop on their V ?
 
I've ran them on other boats and you will get a better grab in turns , you can raise the motor a notch or jack plate it but for a V-20 I dont think it would make that much difference as its a v hull...I see a lot of flats boats running them in very shallow water....Frank


All times are GMT -5. The time now is 02:28 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.