Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)

- Off Topic (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=14)

- - Hey Fillet1 (https://forums.wmpdevserver1.com/community/showthread.php?t=7198)

willy

10-16-2005 07:11 PM

Hey Fillet1

Rich made it home, Old School has landed in Whitehouse Station. Looks pretty sitting in the drive, long time a comin but I think it will be worth it ;D

reelapeelin

10-17-2005 03:19 PM

Re: Hey Fillet1

Sounds like the trailer is good... ;D...

willy

10-17-2005 05:01 PM

Re: Hey Fillet1

Trailer needs some work but it tows well, some replacement and adjustment of rollers, that don't look like they support the boat right not positioning it the way it should be, but Fillet just used it for winter storage so it was not important for him, I'm following everyones advise and not going to leave it at marina on trailer, going to tow all the time

fillet1

10-17-2005 05:06 PM

Re: Hey Fillet1

Bill-

Glad all was okay. Use it in good health. BTW - Try the 1985 wellcraft grey here - www.minicraft.com

Skools Out

10-17-2005 05:09 PM

Re: Hey Fillet1

Hey Willy
The center rollers aren't there to hold or carry the boats weight. They are only to guide it on. Keep the boat up off the center rollers and let the outter runners hold the weight. Most people make that mistake. I've don't it too. If you let the boat sit on the center rollers it will tend to rock back and forth some while in tow at higher speeds.

willy

10-17-2005 05:28 PM

Re: Hey Fillet1

Thanks Rich and Skools there are no center rollers, just a double roller wishbone on each side, one pair in back and one more forward

All times are GMT -5. The time now is 10:32 PM.