Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Off Topic (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=14)
-   -   TRANSOM ANGLE (AGAIN). (https://forums.wmpdevserver1.com/community/showthread.php?t=5901)

charlie_the_tuna 05-14-2007 02:28 AM

TRANSOM ANGLE (AGAIN).
 
ok, we have almost established the transom angle at 15 degrees.
i'm having brackets made for my swim platform.
do i describe the angle at 105 degrees?
do i describe the angle at 75 degrees?
do i simply add or subtract the 15 degree transom angle from a 90 degree angle?


i shoulda just bought a jetski.

reelapeelin 05-14-2007 09:54 AM

Re: TRANSOM ANGLE (AGAIN).
 
CTT...is there any way for the guy makin' the platform to have access to the boat?...

charlie_the_tuna 05-14-2007 11:47 AM

Re: TRANSOM ANGLE (AGAIN).
 
nah reel, i already have the platform itself.
i have to pretty much describe it to the guy to get the brackets made.

Airslot 05-14-2007 04:11 PM

Re: TRANSOM ANGLE (AGAIN).
 
In my eyes, the transom is 15* from vertical. So you could subtract that from 90 and call it 75*. Just remember, this opinion is worth almost as much as you paid for it ;)

Stillrunning 05-14-2007 05:20 PM

Re: TRANSOM ANGLE (AGAIN).
 
Just tell the guy about how it angles back 15 and he shloud be able to figure it out. The answaer would be 105 degrees as 75 would make it a slide instead of a swim platform.

Stillrunning 05-14-2007 05:22 PM

Re: TRANSOM ANGLE (AGAIN).
 
Quote:

Originally Posted by Stillrunning
Just tell the guy about how it angles back 15 and he shloud be able to figure it out. The answaer would be 105 degrees as 75 would make it a slide instead of a swim platform.

Now that I have thought about it a little more if the bracket is mounted on the top of the platform it would be 75 and if it is mounted below its 105.

WiseGuy 05-14-2007 10:32 PM

Re: TRANSOM ANGLE (AGAIN).
 
Yes, 105 on the bottom


All times are GMT -5. The time now is 12:31 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.