Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Off Topic (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=14)
-   -   Unloading / Pulpit Screw Up (https://forums.wmpdevserver1.com/community/showthread.php?t=5865)

msbhammer 05-20-2007 12:15 AM

Unloading / Pulpit Screw Up
 
Ok, what am I doing wrong here guys. Dont even have the anchor on and my pulpit is hitting the trailer and my keel is hitting the trailer. Plasma Cutter is coming out and I'm gonna start cutting everything thats in my way. >:( >:( >:(

http://i47.photobucket.com/albums/f1...r/DSC02599.jpg

msbhammer 05-20-2007 12:17 AM

Re: Unloading / Pulpit Screw Up
 
Does Phats, Willy, Air and MJ have the same problem ??

Hey AIR, I think you posted something on your pulpit about the anchor shackle....mine is to wide and wont slide through the shaft of the pulpit. Gonna go with a small chain and tiny shackle i GUESS.

Airslot 05-20-2007 12:44 AM

Re: Unloading / Pulpit Screw Up
 
Two things... I just found out about the shackle deal tonight. I have a large shackle on the anchor and it barely clears with a lot of wiggling. Chain size is fine, just need the right shackle, no biggy.

Hammer, in that pic you have the boat in way, way to deep. The stern has floated up, lowering the bow. When I launch I have the tires in about 6" of water, the let her (controlled) roll off, won't have any problems at all. That's where you ran into problems.

msbhammer 05-20-2007 12:51 AM

Re: Unloading / Pulpit Screw Up
 
Thanks AIR, knew I was screwing something up. When I cranked her in after the ride, she was fine.

Airslot 05-20-2007 12:55 AM

Re: Unloading / Pulpit Screw Up
 
Any time Officer Hammer. And, let the record reflect that I have posted my daily quota of photographic evidence on this board sir ;D

msbhammer 05-20-2007 12:56 AM

Re: Unloading / Pulpit Screw Up
 
Where at ...me no see no pics. Fishing section ??, hmm let me go check. ;D

Airslot 05-20-2007 01:02 AM

Re: Unloading / Pulpit Screw Up
 
Hammer, how many times have I told ya, ya got to read everything ;)

parishht 05-20-2007 01:05 AM

Re: Unloading / Pulpit Screw Up
 
Hey, I thought the guy with the pirate ship was tryin to
sell it?

Did he decide to keep it and make a go of it?

msbhammer 05-20-2007 02:02 AM

Re: Unloading / Pulpit Screw Up
 
Its for sale for the right price. He's pulling in $750.00 a trip and will be doing 4 trips a day starting in June. I'll be out on it Sat. Left is dressing up too.

randlemanboater 05-20-2007 10:35 AM

Re: Unloading / Pulpit Screw Up
 
Hammer,

Air covered it, you have it in too deep, uh, the trailer I mean.


All times are GMT -5. The time now is 07:16 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.