Skool's Twin 225 Project
 

this is the 1990 motor i picked up over Easter. What ya think i only gave $50 for it, 225 Evinrude 25" shaft.

http://i8.photobucket.com/albums/a46...MVC-001S-2.jpg

http://i8.photobucket.com/albums/a46...MVC-002S-2.jpg

http://i8.photobucket.com/albums/a46...MVC-003S-2.jpg

http://i8.photobucket.com/albums/a46...MVC-004S-2.jpg

http://i8.photobucket.com/albums/a46...MVC-005S-2.jpg

http://i8.photobucket.com/albums/a46...MVC-006S-1.jpg

Took off the heads to look at the salt and to my shock very little, the compression is 90 psi on all but 1 it has 80 so i took the head on this side first and found cylinder has some scoring, i'm going to re-ring her any way then. The marina said it was scrap and they had sold the power pack off due to bad flywheel, all it needed was magnets re-glued, dummies lol.

http://i8.photobucket.com/albums/a46...MVC-007S-1.jpg

here she is in completed form see her now soon it will be painted white and decaled as Johnson

http://i8.photobucket.com/albums/a46...MVC-001S-3.jpg

http://i8.photobucket.com/albums/a46...MVC-002S-3.jpg

http://i8.photobucket.com/albums/a46...MVC-003S-3.jpg

Re: Skool's Twin 225 Project
 

In my best Fog-Horn-Leg-Horn voice..."Boy's busy as a cat coverin' POOP!" ...



Skools...was the 235 same as 225?...

Re: Skool's Twin 225 Project
 

todays work these are this morning before i started my mission

http://i8.photobucket.com/albums/a46...MVC-001S-1.jpg

http://i8.photobucket.com/albums/a46...MVC-002S-1.jpg

http://i8.photobucket.com/albums/a46...MVC-003S-1.jpg

http://i8.photobucket.com/albums/a46...MVC-004S-1.jpg

You wouldn't guess the parts i used lol the motor is a 1991 Evinrude 225 that's where it ends the flywheel is a 1989, the stator a 1997 Vecton 200, crank trigger a Johnson 200 from 1990, the brain is a CDI box for a 1999/2000 225/250 Looper V6, and last the lower unit a fresh 1988 standard rotation Johnson 200 . She's a mixed motor but runs like a top.

Re: Skool's Twin 225 Project
 

nope totally different they were the same as the old 175 and 200 cross-flow motors and super thursty

Re: Skool's Twin 225 Project
 

Man will you quit screwin' around w/those motor-forkers and get somethin' done on that "V" ... I can't wait to see what all you gonna do to it ;) ... 8) ... ;D ...

Re: Skool's Twin 225 Project
 

here's the motor today being installed only took about 45 min to hang and bolt on the boat, that includes hooking the boat to the tahoe and backing to the motor.



http://i8.photobucket.com/albums/a46...MVC-005S-1.jpg

http://i8.photobucket.com/albums/a46...MVC-006S-1.jpg

http://i8.photobucket.com/albums/a46...MVC-007S-1.jpg

http://i8.photobucket.com/albums/a46...MVC-008S-1.jpg

http://i8.photobucket.com/albums/a46...MVC-009S-1.jpg

tight but clears on this 30" set back bracket

http://i8.photobucket.com/albums/a46...0/MVC-010S.jpg

pulled out in the yard to see better

http://i8.photobucket.com/albums/a46...0/MVC-011S.jpg

http://i8.photobucket.com/albums/a46...0/MVC-012S.jpg

http://i8.photobucket.com/albums/a46...0/MVC-013S.jpg

now i've got to get the Johnson on the Fence running right and hang then they will be matched up. well and paint them of course.

Re: Skool's Twin 225 Project
 

$50!!! You suck! (I mean that in the best possible way ;) )

Re: Skool's Twin 225 Project
 

lol gee thanks lol I figured it up and i have right at $200 total in this motor now and it's running like a new one.

Re: Skool's Twin 225 Project
 

here's it's future Twin

***124;The wall of HP lol

http://i8.photobucket.com/albums/a46...s/MVC-032S.jpg

Here's this 1990 Johnson 225 is the one i'm matching to the on i mounted today

http://i8.photobucket.com/albums/a46...s/MVC-033S.jpg

Re: Skool's Twin 225 Project
 

Don't you guys just wanna go to his shop with a cooler full of beer and a chair?