Anyone converted steering
 

Has anyone converted to hydraulic steering, how hard a job? and is that steering you buy motor brand specific, if I change out in a year or two will I need different apparutus at the transom for different brand motor?

Re: Anyone converted steering
 

Willy, I can't tell you how difficult it is to physically do it. I can only tell you how difficult it was to write the check to have it done. ;) When I went up from 150 hp to 200 hp it seemed like the right decision, and I'm glad I did it.

I believe that they are all universal. BTW, I went with Sea Star.

Re: Anyone converted steering
 

Thanks Pipe, can't afford to write the check either. But I do know it would be the single biggest improvement I can make on my v20. The cable steering is notchy feeling and I have adjusted the little fin as far as it can go and still get right turn torque steer.

Re: Anyone converted steering
 

i put in a no feedback cable and helm setup and it improved the boat dramatically for about $150 and 2 hours time. you can go from idle to 40 mph without touching the steering wheel. no tork steer.

Re: Anyone converted steering
 

Please tell me more because that is definetly more in my price range ;D but someone on this site told me they had very little improvement with their system, which one did you get and what engine do you have it on?

Re: Anyone converted steering
 

Willy, I put the no-feed-back (NFB) cable on mine 3 yrs ago and REAL happy w/it...one of the BEST improvements ever...outta the hole and straight across the water w/no hands...MJ keeps wantin' to know what I do w/my hands if I ain't steerin'...why cuppin' tha nortons of course!! ;D...

Re: Anyone converted steering
 

Thanks Rap sounds like my best way to go, which one did you go with? And I'm avoiding any more talk about Nortons and stuff with those Massachusets boys. Seems to get them all exited :o ;D :o

Re: Anyone converted steering
 

It's a single cable rated up to 150 hp...I can take a closer look tomorrow if ya need it...yeah...thinkin' it gets WAY TOO COLD FOR THOSE GUYS... ::)

Re: Anyone converted steering
 

Yea Rap the one I found yesterday was for max 4 cyl engine, if I repower in the future with a 150 I will have to scrap it. So if you get a chance to see what brand and model would help, going to do the job this winter ;)

Re: Anyone converted steering
 

Willy, mine's a Teleflex NFB 4.2 Rotary...4.2 turns lock to lock for V6 and smaller and 50 mph and less is what it says here (West) $215...shop around, you might save on the same unit...as I said before, I've been real pleased w/this system and this doesn't bother me, but there is a little ''free-play'' in the wheel after 3 yrs of use...not excessive, but not ''dead-on'', so if ANY ''play'' in the wheel bothers you go ahead w/hydraulic...Pretty sure you can handle installation... ;)...