Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)

- Modifications (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=13)

- - anchor ideas (https://forums.wmpdevserver1.com/community/showthread.php?t=5056)

i would love to see some pics and ideas for mounting anchors on a v20. i will be needing to get mine sorted out soon.

Re: anchor ideas

check out MJ'S gallery

Re: anchor ideas

I want to do one like MJ, will 1 1/2 starboard be ok ?
Looks like I only see two bolts securing MJ's though, unless he has four bolts and I cant see the other two.
MJ, what ya use as a temp ?

Re: anchor ideas

if you go to my gallery you will see it a little better. There are 3 bolts with 1/4 Alum Dimond plate as a backing.

I used two 3/4" of Starboard bolted toghter. I think 1 1/2 will do you just fine!!

Templet?? Whats that?? All we did was mesure how long we wanted it X how wide then we looked all over the place for something round?

CB stole the cover off are rice cooker and it was the perfect size for the curve !!

After cuting it took a rotor to it round the edges and was ready for install!

On the 70's V20 they have a 3/4 lip around the bow, so when you look in the gallery you will see that we made some spacers out of starboard to fix that.

You will also need a new split bow light system as the single will be replaced with the puplit.

Gallery: http://www.wellcraftv20.com/gallery/...m93&page=1