Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Modifications (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=13)
-   -   Anchor adjustments (https://forums.wmpdevserver1.com/community/showthread.php?t=4897)

tsubaki 09-12-2007 08:53 PM

Anchor adjustments
 
Got P.O.ed that the anchors didn't fit anywhere except on deck and I really wanted them to fit in a floor box or hold.
Almost started to look for ones to fit in the floor boxes but then came to the realization "I can cut the ends off the flukes".
Now they fit. Needed them to be no more than 16" wide.
http://i175.photobucket.com/albums/w...Picture239.jpg

tsubaki 09-12-2007 09:34 PM

Re: Anchor adjustments
 
Sorry, this is what it looks like in the hold.
http://i175.photobucket.com/albums/w...Picture242.jpg
http://i175.photobucket.com/albums/w...Picture243.jpg
At the helm.

macojoe 09-12-2007 10:06 PM

Re: Anchor adjustments
 
works for me!!

Mine stay on the4 bow ready to go ;D

http://syncboard.com/albums/Boat-Tackle-Box/13_G.jpg

msbhammer 09-13-2007 12:39 AM

Re: Anchor adjustments
 
A man with a plan. Looks good from my house. ;)

Sean 09-17-2007 09:50 PM

Re: Anchor adjustments
 
Looks great, know all you have to do is rig them Break Away style and you'r ready to go!!

Drill a whole in the top pannel of the anchor and attach the chain there, run the chain the normal, bottom of the anchor and attach the chain with two zip ties. This way the anchor will hold, but if you need to get it out of the rocks, just tie her off, put the boat in revers, and the zip ties will break so you can retrieve your anchor ;D
Did that make sense ::) ;D

tsubaki 09-17-2007 10:20 PM

Re: Anchor adjustments
 
Yes, except the rocks part. ;D
At best we got some coral or 5/8" gravel to contend with at this shelf location for about 40 miles to the east.

Sean 09-17-2007 10:22 PM

Re: Anchor adjustments
 
I guess you dont need to rigg it like that then :-/ ;D
Looks great!

axespino 09-18-2007 12:27 AM

Re: Anchor adjustments
 
Can you post a pic of the set up with the zip ties? Thanks

macojoe 09-18-2007 09:29 AM

Re: Anchor adjustments
 
Its easy to do axe

Drill hole add chain or rope, I used rope to flex easy with anchor movement.

Run up the anchor shaft leaving a little so anchor can move.

Add zip ties to rope were the chail goes, and then put chain to rope instead.

Pull hard zip ties break, anchor will come up bottom first.

http://syncboard.com/albums/Boat-Tac...chor.sized.jpg

Sean 09-18-2007 05:02 PM

Re: Anchor adjustments
 
Thats it! ;)
Thanks MJ!


All times are GMT -5. The time now is 09:40 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.