Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   General (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=10)
-   -   what to do? (https://forums.wmpdevserver1.com/community/showthread.php?t=4349)

phester 04-16-2005 10:06 AM

what to do?
 
do i take out the new boat for test #1, or go flounder fishing in my 15ft. aluminum?

Mac_Attack 04-16-2005 02:55 PM

Re: what to do?
 
Take the new boat out! Bill Mc ;D

macojoe 04-16-2005 03:59 PM

Re: what to do?
 
Take out the new one!!!

chumbucket 04-17-2005 12:44 AM

Re: what to do?
 
Any reason why you can't take the new one out AND Flounder fish from IT? ;) 8)

phester 04-17-2005 09:38 AM

Re: what to do?
 
good answer chum, however, i started new boat and ran w/ earmuffs, shortly after it idling a warning signal came on. I shut it down, looked around, checked,again, vro oil, 1/2 full, water pumping strong from pis port,engine warm. Start again, idling nicely approx. after20-25 seconds, the alarm.Turned it off, looked around again,started up,same thing...however....just before turning it off, I gave the primer ball a squeeze, alarm off.Let it idle, strong stream of water out the port,20-30 secs. alarm on again, squeeze the ball, alarm off. I am bringing it in to my mechcanic this week to give it a tune up and what ever else it may need, so that was the extent of me monkeying around w/ it.That's why I was going to fish in my little boat... that alarm has to be dealt w/ first... BTW... 1993 johnson 150 ocean runner... fuel pressure/fuel pump issues? Now that I'm done typing this[15 Mins.]...I should have maybe posted this in repairs?

Mac_Attack 04-17-2005 09:44 AM

Re: what to do?
 
I agree, fix alarm problem then take new one out! Bill Mc ;D

phester 04-17-2005 09:50 AM

Re: what to do?
 
no doubt MAC ,being to anxious is a risk and may lead to more trouble

macojoe 04-17-2005 01:08 PM

Re: what to do?
 
Is it the fuel ball or the oil ball you are pumping??

Could be the oil is not pumping?? I don't think gas will set alarm off??

You can go to Iboats.com and ask all the questions you want!!! Some really smart guys on there!!

You might be able to fix your self real cheap!

Good luck

phester 04-17-2005 07:57 PM

Re: what to do?
 
macojoe, thanks for the input, two things, there is a primer ball on the oil pump line and it is hard [like a primed fuel ball] nowhere does it say to prime the oil ball...i think that is used to purge air out of the line after you service the pump,change filter etc. #2...,the manual states if you have low fuel pressure an alarm will come on and stay on until the proper press. is achieved...still i've only owned this boat 6 days, my mechanic is getting it anyway on wed...., i'm not going to mess w/ it.

macojoe 04-17-2005 08:19 PM

Re: what to do?
 
To new for me!! All my motors don't sound a alarm for fuel!
I hate new stuff!!


All times are GMT -5. The time now is 04:34 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.