Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   General (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=10)
-   -   Manual for Furuno GP-1600F (https://forums.wmpdevserver1.com/community/showthread.php?t=3492)

scook 10-04-2006 10:46 PM

Manual for Furuno GP-1600F
 
Anybody know where I can get a manual for a Furuno GP-1600F chart plotter/FISH FINDER? Or just a copy of the fish finder/depth sounder part of the manual?

I found one for the GP-1600 (it's the same unit, but doesn't have a fish finder function) on the Furuno site. I only want to use the fish finder/depth sounder, and there are a bunch of functions I can't figure out from the really short Operator's Guide that I got off their site.

I emailed Furuno, but haven't heard anything for over a week, so they're probably not going to be much help.

Thanks - Scott

Franco 10-05-2006 12:58 AM

Re: Manual for Furuno GP-1600F
 
I found this link on the furono website

http://www.furuno.com/Furuno/Doc/0/N...7s%20Guide.PDF

http://www.furuno.com/Furuno/Doc/0/E...s%20Manual.pdf

scook 10-05-2006 03:14 PM

Re: Manual for Furuno GP-1600F
 
Thanks Franco - that's the one I have, and don't understand the fine points about CLUTTER, ADVANCE, Expansion Markers, TVG, etc., and thought the full manual might educate me so I could use the thing to full advantage. The following problem is something I'd like to solve, for sure.

I got the boat running and in the water (finally) and took it for a run which included the main channel of the Columbia River. We were cruising at around 25 - 30 MPH with the depth showing at 30' - 40' and all of a sudden it jumped up to 5' - 6' (it was a bowel loosening experience). I was pretty sure that couldn't have been correct (but just in case, I started following a boat with deeper draft then the V-20. It kept doing it every so often, and even knowing that it was probably not correct, it was pretty uncomfortable when it happened. I probably have some sensitivity setting wrong, and I'd like to get it cleared up. There's also supposed to be some fish finding settings, which I could really use - being not such a great fisherman, I can use all the help I can get.

Thanks again - Scott


All times are GMT -5. The time now is 12:56 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.