Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   General (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=10)
-   -   LIVE  from the T-3!! (https://forums.wmpdevserver1.com/community/showthread.php?t=3048)

reelapeelin 05-03-2007 02:50 PM

LIVE  from the T-3!!
 
I got Willy on the phone right now...he's out on the lake in his new T-3 puttin' time on the new motor...he ran me up to 4 grand and although motor is whisper quiet, I can hear LOTTA wind so he' MOVIN' ... he's tryin' to get to 6 grand at WOT :o ... sounds like he's havin' WAY too much fun up there ;D ;D ...thanks for callin' ya ol' COOT!! ;D ;D ...

Airslot 05-03-2007 03:14 PM

Re: LIVE  from the T-3!!
 
I was wonderin what you were talking about, Willy's got a G-3 ;D

reelapeelin 05-03-2007 03:33 PM

Re: LIVE  from the T-3!!
 
Quote:

Originally Posted by Airslot
I was wonderin what you were talking about, Willy's got a G-3 ;D



Oooops...typo ::) ...

Blue_Runner 05-03-2007 04:51 PM

Re: LIVE  from the T-3!!
 
That Willy be crazy as a bed bug!

macojoe 05-03-2007 05:20 PM

Re: LIVE  from the T-3!!
 
Good for Willy!! Its a great day for it, at least here!

I have been working on my boat all day, I have the wires run for the lights, just have to wire to the switch, I have the Trim switch that Reel sent me all wired and working.
I have the first part of my secret project started, but not sure I like the way its coming??

only 5 days to get it all done! :'(

tsubaki 05-03-2007 09:17 PM

Re: LIVE  from the T-3!!
 
Did he ever get that slack bubble problem fixed?

tsubaki 05-03-2007 09:18 PM

Re: LIVE  from the T-3!!
 
And if so what was it? :P :P

msbhammer 05-03-2007 10:50 PM

Re: LIVE  from the T-3!!
 
Wind in your hair, a cold brew in your hand and a keeper on your line Willy. Glad to hear your having a good time. ;)

lumberslinger178 05-03-2007 11:37 PM

Re: LIVE  from the T-3!!
 
go willy dawg :) ;) :D ;D

willy 05-05-2007 11:44 AM

Re: LIVE  from the T-3!!
 
Hey Snaggers, Had to give the Old Coot a call from the road so to speak. Finally had a day to get the G3 out. Got to put ten hours varied rpm and change the oil once for the break in. Got about six hours in now after this trip.
This little 60 yammie four stroker has the one of those sweet sounds that just gives ya a big grin. Sort of cross between a motorcycle engine and a jet turbine with very low noise level and no vibration at all. Very cool.
So far I have found out that this G3 v-hull rides like a dream, very dry for a non-V and handles the chop and boat wakes great. Very solid compared to my many past tin boats.
The boat engine combo seems ideal so far, boat jumps to plane instantly, stays on plane at 3500 rpms and does about 20 mph there. I cant crank her up yet but when talking to Ozzie had her to 4500 rpm and we were cooking across the lake, gps said 28 KTS and it was still building but I had to back off due to no wake zone coming up and engine break in.
I held the phone for him right above the engine, I think the wind was louder than the engine ;D


All times are GMT -5. The time now is 08:09 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.