Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)

- General (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=10)

- - Wiring (https://forums.wmpdevserver1.com/community/showthread.php?t=2886)

I'm having trouble with my one of my fuse/wiring blocks, (I have 2 with one fed from the other) one appears to have a short in it and it's causing some problems and I want to replace. I need 1 large one to handle all or I need 2 like I have now. They are installed on the back side of drop down box inside the sleep area of my V20.
Does anyone have any suggestions on what type to buy and has anyone done this before where it's attached to the drop down lid inside the cabin that gives access to the back side of the dash?

I'm sure someone has done this before, any help provided would be appreciated.

I have one of these:

http://bluesea.com/category/5/21/productline/126

mounted in the location that you mention. Mine is fed by a pair of 4ga wires from the battery. Everything forward of the bilge runs from this block w/ no problems for 4 years now.

i use the same one. my parot is still land locked but, it worked well in my capris.

Airslot made every suggestion I was about to make...good stuff and very simply put ;) ...

I have a 4 glass fuse box with a stainless bolt as a ground block. Has worked for 8 years ;)