Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   General (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=10)
-   -   bow rail (https://forums.wmpdevserver1.com/community/showthread.php?t=2882)

rhahn427 06-19-2007 01:06 PM

bow rail
 
Ok ....... I admit it ......... I'm a newbie ......

I want to replace my bowrail with an open front bow rail.

I know I can buy the tubing and the components that will allow me to use the same mounts but I want to know what kind of shop do I need to go to to get the rail bent to match the bend in my existing rail? Or how do I bend it myself.

Thanks

Rick

Sean 06-19-2007 01:19 PM

Re: bow rail
 
Couldn't you just take a sauzal to the existing rail and wala!~ you have a open front rail ;D

reelapeelin 06-19-2007 02:40 PM

Re: bow rail
 
I took my center section out w/a pipe-cutter just forward of the upright, then put INSIDE caps from the hardware store ... but if you want a reely factory-lookin' job, and yer near the coast, find a T-top maker ;) ...

rhahn427 06-19-2007 03:43 PM

Re: bow rail
 
Quote:

Originally Posted by Sean
Couldn't you just take a sauzal to the existing rail and wala!~ you have a open front rail ;D

I could but I wanted to keep the old one intact incase I didn't like the open front for some reason

Stillrunning 06-19-2007 06:20 PM

Re: bow rail
 
Quote:

Originally Posted by rhahn427

I could but I wanted to keep the old one intact incase I didn't like the open front for some reason

Just cut it off and if you dont like the looks then have a new one bent then you may have no cost at all.

tsubaki 06-19-2007 06:25 PM

Re: bow rail
 
TAKE IT OFF, TAKE IT ALL OFF.
Sorry thought about the titibar.

schmahlworld 06-20-2007 01:41 AM

Re: bow rail
 
I removed the middle also and capped it off. looks factory nice. I also cut the two mounting pipes down to 51/2" (front) and3"(middle) then took a couple inches off the rear so the rail would again fit in the rear rail fitting. I just lowererd the whole thing several inches. It was easy to do. you dont have to remove or relocate the mounts! gives it a nice low profile look, but still plenty useable. I can send you pics if you like.

tsubaki 06-20-2007 08:19 AM

Re: bow rail
 
Welcome to the site schmahl, of coarse we want pictures (their expected).
Look under "How To" topics or post stuff and these guys will help.

msbhammer 06-20-2007 01:23 PM

Re: bow rail
 
Some of te old sea dogs around the boat yard say to fill the tubing with sand. This will prevent the tubing from getting kinks in the tubing.

schmahlworld 06-20-2007 11:17 PM

Re: bow rail
 
thanks for the welcome. This is a very interesting site with lots of great info! I have owned my v20 about 5 years now and live in Vancouver, Washington. I have never seen another one here in the portland/vancouver area. Somehow mine found its way out here. It handles the big, fast, choppy water of the Columbia river very well. I take her out salmon/sturgeon fishin almost every weekend. I will get some pics up soon. I have really enjoyed looking at all your boats. Lots of great ideas out there and the pride of ownership is awsome. I had no idea there was such a loyal following!


All times are GMT -5. The time now is 03:07 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.