Fishing with wire
 

Looking to setup some wire rigs to troll for stripers. I was thinking of buying some cheapy setups cause I heard the wire really destroys your gear. Anybody got any suggestions about rods and reels that they've had some luck with. ???

Fishing with wire
 

Looking to setup some wire rigs to troll for stripers. I was thinking of buying some cheapy setups cause I heard the wire really destroys your gear. Anybody got any suggestions about rods and reels that they've had some luck with. ???

Re: Fishing with wire
 

They make rods with rollers instead of the normal eyes, that's what you'll need for wire line. I'd skip the wire line and go with heavy test braided line. I ditched my wire line this year because the braided works better (goes to the bottom better in deeper water) , is cheaper, and easier to deal with than wire line. Just my 2cents! My Penn 320s have worked just fine for wire/braided/mono for catching stripers.

Re: Fishing with wire
 

They make rods with rollers instead of the normal eyes, that's what you'll need for wire line. I'd skip the wire line and go with heavy test braided line. I ditched my wire line this year because the braided works better (goes to the bottom better in deeper water) , is cheaper, and easier to deal with than wire line. Just my 2cents! My Penn 320s have worked just fine for wire/braided/mono for catching stripers.

Re: Fishing with wire
 

So you troll umbrellas etc with braided? How do u determine depth of rig??

Re: Fishing with wire
 

So you troll umbrellas etc with braided? How do u determine depth of rig??

Re: Fishing with wire
 

We use level wind reels and count the "bars" Each bar is about 10', give or take.

Airslot

Re: Fishing with wire
 

We use level wind reels and count the "bars" Each bar is about 10', give or take.

Airslot

Re: Fishing with wire
 

I make my own rods, I have a nice Lamiglass blank I made with carbide guides and a roller tip.

I use a Penn 114HS with all wire, I use a 4 foot leader of 100# Jenki mono, with a 5 oz jig.

If you are new to wire You can have the guy that spools it for you to put a 3 or 4 foot mono between each 100 foot section, this will allow you to no how many 100 foot sections you have out (normaly 300) and you can jig on the mono instead of the wire.

I use all wire and been doing it for a long time. But I kink it from time to time and there goes all the wire to the sea.

It sucks to fish this way!! especially when there are all shorts around!! But when the fish just arent biting this will save the day!!

http://syncboard.com/albums/Fishing/..._020.sized.jpg

http://syncboard.com/albums/Fishing/..._021.sized.jpg

http://syncboard.com/albums/Fishing/..._022.sized.jpg

http://syncboard.com/albums/Fishing/..._027.sized.jpg

http://syncboard.com/albums/Fishing/..._028.sized.jpg

Re: Fishing with wire
 

I make my own rods, I have a nice Lamiglass blank I made with carbide guides and a roller tip.

I use a Penn 114HS with all wire, I use a 4 foot leader of 100# Jenki mono, with a 5 oz jig.

If you are new to wire You can have the guy that spools it for you to put a 3 or 4 foot mono between each 100 foot section, this will allow you to no how many 100 foot sections you have out (normaly 300) and you can jig on the mono instead of the wire.

I use all wire and been doing it for a long time. But I kink it from time to time and there goes all the wire to the sea.

It sucks to fish this way!! especially when there are all shorts around!! But when the fish just arent biting this will save the day!!

http://syncboard.com/albums/Fishing/..._020.sized.jpg

http://syncboard.com/albums/Fishing/..._021.sized.jpg

http://syncboard.com/albums/Fishing/..._022.sized.jpg

http://syncboard.com/albums/Fishing/..._027.sized.jpg

http://syncboard.com/albums/Fishing/..._028.sized.jpg