Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Repairs (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=16)
-   -   Whats the 1st thing to do when you work on your boat motor? (https://forums.wmpdevserver1.com/community/showthread.php?t=23982)

oteps 06-29-2024 12:14 PM

Whats the 1st thing to do when you work on your boat motor?
 
unhook battery. #2, throw all your tools under motor and make sure they are covered in gunk. Its gonna happen anyway. Outboard guys throw your tools in the pool then retrieve.

phatdaddy 06-29-2024 05:38 PM

First thing i seem to do is lose all of my 10mm sockets and Phillips screw drivers.

Blue_Runner 06-30-2024 07:02 AM

10mm sockets love to hide or skip town all together. Also, plenty of flat head screw drivers laying around just when you need them the least.

Destroyer 07-01-2024 02:44 PM

#1 Put any screws you remove into a container and then place that container in a special place so you won't loose them.

#2 Loose the container

.

Pipe_Dream 07-01-2024 04:00 PM

Quote:

Originally Posted by Destroyer (Post 253250)
#1 Put any screws you remove into a container and then place that container in a special place so you won't loose them.

#2 Loose the container

.

^^^ This, but after I check the weather, answer emails, turn on some music...

phatdaddy 07-01-2024 06:24 PM

well, hope you guys are happy. Ya ll jinxed me. Alternator went out on my merc. Had to put a new one on. First one lasted 444 hours, this one lasted 434 hours. See a pattern here.

Anyway, i needed my 10mm ignition type wrench to hold the post nut while i tightened ring terminal down. Nowhere to be found. Ended up grinding down my 10mm open end so i can promptly loose it now.

Side note. I took the bad one to local alt shop. He said they could rebuild, but would be next week before it s ready. Got plans for the Fourth, so I went to local Merc Dealer and bought a new one. Told the Alt shop to go ahead and rebuild and in 444 hours, I m ready.

Whole point of story is in four years, I ll be looking everywhere for my spare alt.

If you guys remind me I have one.

scook 07-01-2024 08:08 PM

I’m cleaning out my shop and I have a lot of stuff. What’s working for me is to take a stab at how much of one kind of thing I have (that I want to keep), put it in a nice clean cardboard box, write on it in big fat felt marker what it is and face the label out on a shelf. “BOAT PARTS” might work for you. With everyone getting Amazon deliveries, it’s not hard to get an assortment of good boxes and “put like things together” one of my wife’s great sayings.

Hope this helps. Lord knows you help enough people:nice:

Destroyer 07-01-2024 10:57 PM

Quote:

Originally Posted by scook (Post 253262)
I***8217;m cleaning out my shop and I have a lot of stuff. What***8217;s working for me is to take a stab at how much of one kind of thing I have (that I want to keep), put it in a nice clean cardboard box, write on it in big fat felt marker what it is and face the label out on a shelf. ***8220;BOAT PARTS***8221; might work for you. With everyone getting Amazon deliveries, it***8217;s not hard to get an assortment of good boxes and ***8220;put like things together***8221; one of my wife***8217;s great sayings.

Hope this helps. Lord knows you help enough people:nice:

I have several boxes of "Boat Parts" boxes already. Problem is whatever I'm looking for is never in any of them. (It's usually in a box labeled "dishes" or some such thing)........

.

scook 07-02-2024 12:35 AM

I can’t argue with that:you:

phatdaddy 07-02-2024 11:38 AM

Great idea Scook. Been trying to consolidate smaller boxes to the tubs like Depot sells. But I have two storage sheds. One at the house and another bout 8 miles from here,so wherever I m working,what i need is cross town.

I like your idea of writing on the boxes. I put tape and wrote on mine. Came back couple weeks later and tape had curled up and fell off. I ll get a paint pen.


All times are GMT -5. The time now is 02:01 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.