Wellcraft V20 Community - Checking stator

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)

- Repairs (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=16)

- - Checking stator (https://forums.wmpdevserver1.com/community/showthread.php?t=23189)

steplift20

04-04-2021 08:36 AM

Checking stator

150 1988 Mercury out board, I had a problem with my engine and I am going to change my 2 switch boxes but I want to check my stator, my question is this, I have the batterys out of the boat do I have to install my battery to do the test? I know it has to be grounded to the engine and turned off but do I have to put the batterys in. Can it be tested with the batterys out.

Dana A

04-04-2021 12:05 PM

Quote:

Originally Posted by steplift20 (Post 241403)

Good video of checking stator
https://www.youtube.com/watch?v=zlxIyOa_DkA

spareparts

04-04-2021 01:16 PM

stator outputs should be checked while spinning the engine over using a DVA adaptor hooked to a volt meter. But you can check stator resistance using an ohm meter

steplift20

04-04-2021 07:00 PM

Thanks for the info, I watched the YouTube video and helps me a lot , I will post how I make out . Thanks

All times are GMT -5. The time now is 01:40 PM.