Wellcraft V20 Community - Removing 5" extension from Exhaust Tube

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)

- Repairs (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=16)

- - Removing 5" extension from Exhaust Tube (https://forums.wmpdevserver1.com/community/showthread.php?t=20483)

Carl	08-24-2014 10:11 AM

Removing 5" extension from Exhaust Tube

I have a 25" mercury 150 engine and a 20" mercury 150 HP parts engine. Same vintage so most parts are interchangeable. I am trying to remove the 5" extension from the 25" engine exhaust tube and it does not seem to move at all. I don't want to break or damage anything, - so what is the trick? I don't see any fasteners on the engine or in any parts sketches. Any help is appreciated. Thanks

spareparts

08-24-2014 10:15 AM

heat, lots of it. You may have to remove the studs before you can get it off the mid section

RidgeRunner

08-25-2014 01:37 PM

The exhaust cans are identical on the 20,25" and 30" motors as I recall. You sure you have to remove 5" of it? LOL!

RidgeRunner

08-25-2014 01:38 PM

I am thinking 3.0Liter Merc stuff. The 2.0,2.4,2.5 might be different, nevermind.

bradford

08-26-2014 09:08 PM

Quote:

Originally Posted by RidgeRunner (Post 216555)

I am thinking 3.0Liter Merc stuff. The 2.0,2.4,2.5 might be different, nevermind.

Hell, I thought he dropped a socket extension down the hole when I first read it.

All times are GMT -5. The time now is 04:10 PM.