Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Boats For Sale or Wanted (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=8)
-   -   Bracket on eBay (https://forums.wmpdevserver1.com/community/showthread.php?t=1877)

Blue_Runner 05-22-2006 06:05 PM

Bracket on eBay
 
http://cgi.ebay.com/ebaymotors/grady...40822686QQrdZ1
http://i5.ebayimg.com/04/i/07/2e/cf/ed_1.JPG

Bygracealone 05-23-2006 05:17 PM

Re: Bracket on eBay
 
Hey guys, do any of you happen to know if this bracket would fit nicely on a V20? I realize that the transoms for each make and model are different and therefore a bracket that fits on one boat won't necessarily fit on my V20. I just thought I would check to see if any of you happen to know off hand whether or not this bracket would fit a V20.

Maco, didn't you use a bracket that didn't fit quite perfectly? Would you have done things differently now that you've lived with it for some time? Just curious...


TheTinMan 05-23-2006 08:11 PM

Re: Bracket on eBay
 
Go to http://www.greatgrady.com/forum/index.php and ask what the angle of the transom is on the Gulfstream. *If it's the same it should be a good fit, and if it's not, I think you can customize it (wedges) to make it fit. *MJ, didn't you do that?

TheTinMan 05-23-2006 08:14 PM

Re: Bracket on eBay
 
I just found the transom angle on the GW...it's 15*....Now, what's the v-20's again?

Beam Amidships: 9'3"
Bridge Clearance: 6'5" w/Hardtop: 8'8"
Center Line Length: 23'5"
Cockpit Depth: 27"
Cockpit Square Footage: 56 sq. ft.
Hull Draft: 17"
Dead Rise at Transom: 20° with SeaV2 hull (continuously variable vee)
Transom Angle: 15°
Maximum HP: 400
Outboard Shaft Length
Single: 25"

Dual: 25"

TheTinMan 05-23-2006 08:24 PM

Re: Bracket on eBay
 
I think the V20 has a 13* transom angle. Here's a thread on it but never really answered. You can see how to measure the transom angle for yourself.

http://www.wellcraftv20.com/cgi-bin/...8707139;start=

Bygracealone 05-23-2006 10:30 PM

Re: Bracket on eBay
 
Tin,

Thank you sooooo very much for the response. I appreciate all the time and effort you put into it. I'll try to figure out the degree of my transom tomorrow.

TheTinMan 05-23-2006 11:18 PM

Re: Bracket on eBay
 
no problem, wasn't much time or effort either :)

brianct12 05-23-2006 11:29 PM

Re: Bracket on eBay
 
I was thinking of a bracket at one time ... so measured the transom angle on my boat - 1988. I believe it measured out at around 11 degrees.

Zebra 05-24-2006 09:07 AM

Re: Bracket on eBay
 
there's a boat close by i think its a GW 20 overnighter and the guy installed a full braket armstrong i think with his cutout transom. have not been on the boat in the water but he's a diver and the access in and out of the boat looks great.

Blue_Runner 05-24-2006 12:47 PM

Re: Bracket on eBay
 
Yeah, didn't know if would work as-is or not, but if the price stays where it is it would be a decent deal -

Oh SNAP! I just realized this is in BC Canada! Bummer! :-[ :'( ::)


All times are GMT -5. The time now is 03:58 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.