Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Performance (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=15)
-   -   Hard Starting (https://forums.wmpdevserver1.com/community/showthread.php?t=18154)

Joker2 09-01-2012 03:24 PM

Hard Starting
 
Hey guys I recently got rid of my VRO tank and went to mixing oil into the gas. Everything is fine except when I go to use the boat after e few days to a week of not using it, it is hard to start the first time. It takes about 10-15 cranks to get it going, when it starts there is a fair amount of smoke initially. after that she runs and starts fine all day ( no smoke ). I never had this problem with the VRO hooked up. is this normal ?

macojoe 09-01-2012 03:51 PM

i would say yes, most motors are 100 to 1 oil at idle, 50 to 1 at top speed, so when you come in thur a no wake zone you foul the plugs a little, so when you start the extra oil has to burn off.
when i disconnected the oil injection on my old yamaha it would foul the plugs every 3 trips, always had spares, and changed them out. then cleaned the used ones and reused the next time.

phatdaddy 09-01-2012 04:34 PM

i have a merc, so that all seems normal to me.


All times are GMT -5. The time now is 01:01 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.