Wellcraft V20 Community - Replacing fill/vent lines

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)

- Repairs (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=16)

- - Replacing fill/vent lines (https://forums.wmpdevserver1.com/community/showthread.php?t=17718)

barnegatV20

06-09-2012 04:13 PM

Replacing fill/vent lines

jasoncooperpcola

06-09-2012 04:17 PM

When i replaced the fill line in the 250 Sportsman, i unhooked it from the tank then used a piece of 1 1/2" OD pipe to join it to the new one with screws. Then i pulled the old one out from the fill side and it pulled the new one behind it.

awthacker

06-09-2012 10:36 PM

It does run through some foam, but should wiggle free. Your problem sounds familiar, and I hope for the simplest fix for you... but you may need a new tank. I'm in the process of ordering a custom tank now, and it ain't gonna be cheap.

jasoncooperpcola

06-09-2012 10:44 PM

It takes two people, one to push one to pull. A little cussing might help too. :bat::bat:

All times are GMT -5. The time now is 12:17 AM.