1986 Evinrude 150 complete with controls $500
 

I decided to buy the whole boat and I am selling a running 1986 evinrude 150hp with controls

also has an alumium prop

for
$500

also looking for trades

http://members.cox.net/deshet/DSC02082.jpg

http://members.cox.net/deshet/DSC02079.jpg

Re: 1986 Evinrude 150 complete with controls $500
 

you had it in the water yet bud? if its not to late, you might aughta before you pull it. sometimes those things run great on the muffs, then when you put them in the water they fall flat on thier a$$. also, you can get a compression guage at autozone for about $15 remove all the plugs and open up the throttle wide open. check each cylinder with the guage by turning over with the key (make sure battery is fully charged) if it all checks good talk to macoejoe. this may be a better deal than the one he is looking at. if mj dont want it post that puppy on ebay, no reserve, and start the bidding at $500. if it all cheks out good you should get $800-$1000 for that motor! good luck.

Re: 1986 Evinrude 150 complete with controls $500
 

Any Pics. of the Motor ??? ??? ???

Re: 1986 Evinrude 150 complete with controls $500
 

pictures added

Re: 1986 Evinrude 150 complete with controls $500
 

OOPS, I missed them. Nice pics. and motor. what size shaft ?

Re: 1986 Evinrude 150 complete with controls $500
 

Looks like a 25" shaft mounted on a 20" transom cause that jackplate is all the way up.

Airslot

Re: 1986 Evinrude 150 complete with controls $500
 

Here's the pics guys

http://i8.photobucket.com/albums/a46...r/DSC02079.jpg

http://members.cox.net/deshet/DSC02082.jpg

Re: 1986 Evinrude 150 complete with controls $500
 

Lets see the whole boat, the damaged transom, pictures of the cowling off. More, More, More. :o :o :o :o :o :o :o :o :o :o :o :o :o :o :o :o :o :o

Re: 1986 Evinrude 150 complete with controls $500
 

and some interior pics of the cockpit. few more things i might need if she got 'em. tx

Re: 1986 Evinrude 150 complete with controls $500
 

deshet..i need that jackplate ;D