Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)

- Repairs (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=16)

- - need advice (https://forums.wmpdevserver1.com/community/showthread.php?t=16092)

aussie

06-12-2011 09:53 PM

need advice

removeing my engine from my boat how is the shaft on the leg connected to the engine . is it just a shaft with splines . does it just slide out any locking pins . dont want to force it and damage it . before i no whats holding it

THEFERMANATOR

06-12-2011 10:19 PM

I believe you put the shifter in forward then remove the trim rams and the 6 nuts that atatch the outdrive and it comes out. Unbolt the engine and lift it out.

aussie

06-12-2011 10:23 PM

all i need is the engine out does the shaft just slip out

UBHSTRY

06-12-2011 10:35 PM

Yes, just slips out.

spareparts

06-12-2011 10:39 PM

much easier to pull the drive before pulling the engine. Just put the shifter in fwd, remove the trim cylinder pins Like Ferm said, and remove the 6 mounting nuts

UBHSTRY

06-12-2011 10:40 PM

Quote:

Originally Posted by spareparts (Post 175094)

much easier to pull the drive before pulling the engine. Just put the shifter in fwd, remove the trim cylinder pins Like Ferm said, and remove the 6 mounting nuts

Wish I would have done it that way:hide:

aussie

06-12-2011 11:59 PM

thanks guys got it out easier than i thought :clap:

All times are GMT -5. The time now is 10:22 PM.