Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Fishing (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=5)
-   -   Jacksonville FL area (https://forums.wmpdevserver1.com/community/showthread.php?t=15729)

Starzofchaos 04-20-2011 08:20 AM
Jacksonville FL area
 
Anyone on here that lives in the Jacksonville, FL area? Well I am leaving MS and heading out to Jax this summer. Looking for some fishing areas.

RWilson2526 04-20-2011 09:03 AM
Our member Awthacker I'm pretty sure in that area....seems like he does pretty darn well with the fishin too!

awthacker 04-20-2011 09:31 PM
Quote:
Originally Posted by RWilson2526 (Post 171856)
Our member Awthacker I'm pretty sure in that area....seems like he does pretty darn well with the fishin too!
Well... I cheat (scuba tanks), but I do know where the fish are.

Starz, you can give me a shout before you come and I will try to help. There is alot of good fishing grounds within 10 to 20 miles of shore and I can help get you started. You just need GPS and bottom finder. We have tons of artificial wrecks and natural bottom in 60 to 100 ft depth. You can fish the bottom or troll on top for kings.

Starzofchaos 04-21-2011 09:04 AM
Awesome! Thanks for the hook up! I'll be out in the Jax area in June~July of this year. I have no clue when I will be able to bring my boat out... I'll try and bribe my dad that has a truck to drive out and visit for a weekend. My Jeep Cherokee will die if I try to pull it for 7 hours across the pan handle.

I haven't fish the east cost before, so how is the wave action? I got a 18v Fisherman. Its a awesome boat for inshore and some near shore. The last time I taken it 20+ miles out in the gulf of mexico... It beat me pretty bad. That was in 1-2 foot seas with the occasional 3ft' er.

Destroyer 04-21-2011 09:47 AM
Quote:
Originally Posted by Starzofchaos (Post 171922)
Awesome! Thanks for the hook up! I'll be out in the Jax area in June~July of this year. I have no clue when I will be able to bring my boat out... I'll try and bribe my dad that has a truck to drive out and visit for a weekend. My Jeep Cherokee will die if I try to pull it for 7 hours across the pan handle.

I haven't fish the east cost before, so how is the wave action? I got a 18v Fisherman. Its a awesome boat for inshore and some near shore. The last time I taken it 20+ miles out in the gulf of mexico... It beat me pretty bad. That was in 1-2 foot seas with the occasional 3ft' er.
Starz, don't put your Jeep down. If it's an inline 6 cylinder 4.0L engine in reasonable shape that thing will pull a V20 all day long without a whimper. I have a 1998 Jeep Cherokee with auto trans that I've used several times to pull my boat to and from Fla.. a distance of roughly 1300 miles and 21 hours of towing. 7 hours should be a walk in the park.

Starzofchaos 04-21-2011 10:52 AM
I have no problem towing it around town, the problem is on the highway. The max speed I can get it to go is 65 that is going down hill. The 96 motors produced around 190hp / 230lbft ,and most dyno results that I have seen on the internet for that year was 130~140 on the ground with the auto tranny. So around 25-30% power train loss which is normal. If I re-geared the rear end to 4.10 I would have no problem towing it at highway speeds, even be able to use the over drive on the highway.

Destroyer 04-21-2011 02:48 PM
:head:
Quote:
Originally Posted by Starzofchaos (Post 171938)
I have no problem towing it around town, the problem is on the highway. The max speed I can get it to go is 65 that is going down hill. The 96 motors produced around 190hp / 230lbft ,and most dyno results that I have seen on the internet for that year was 130~140 on the ground with the auto tranny. So around 25-30% power train loss which is normal. If I re-geared the rear end to 4.10 I would have no problem towing it at highway speeds, even be able to use the over drive on the highway.
You'll have to re-gear both the front and rear pumpkins if you have 4wd.

I don't understand though. Like I said, I have the same engine in my 98' and I tow at around 70-75 with no problems on I95 when I can get away with it. :head:

Starzofchaos 04-21-2011 03:03 PM
I think the problem lies in the t-top and what else stick up and around the jeep. It causes a bit of drag when pulling it down the highway. I borrowed a co workers 2500 Ram truck to bring it up here last summer. The MPG down w/o a load was around 22mpg. On the way back up it was running around 18mpg.
I have no idea what the weight is. I know its less than 3000lbs or so.

bradford 04-25-2011 01:04 AM
Ask Ferm about what he used to drag around with his pink jeep.

awthacker 04-25-2011 05:43 PM
Quote:
Originally Posted by Starzofchaos (Post 171922)
Awesome! Thanks for the hook up! I'll be out in the Jax area in June~July of this year. I have no clue when I will be able to bring my boat out... I'll try and bribe my dad that has a truck to drive out and visit for a weekend. My Jeep Cherokee will die if I try to pull it for 7 hours across the pan handle.

I haven't fish the east cost before, so how is the wave action? I got a 18v Fisherman. Its a awesome boat for inshore and some near shore. The last time I taken it 20+ miles out in the gulf of mexico... It beat me pretty bad. That was in 1-2 foot seas with the occasional 3ft' er.
You'll find that you have to pick and choose your days. It's tough being a weekend warrior on the east coast. Should get plenty of good trips in during that time frame though. Summer is usually good until the occasional tropical storms/hurricanes start to roll by in July.


All times are GMT -5. The time now is 06:50 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.