Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   General (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=10)
-   -   Fuel Flow Meter (https://forums.wmpdevserver1.com/community/showthread.php?t=13698)

captainmike 03-24-2010 10:06 AM

Fuel Flow Meter
 
Anyone installed a fuel flow meter on their V? Before offshore season kicks in I want to get one installed and am interested in whatever advise anyone has on these. My only experience with them has been the systems on the OSV's I ran in the Gulf, certainly not what I'd be putting on a 20-footer. My 200 Yami's gonna chug some fuel and I need to keep tight reigns on that when I venture out later this season. I like this one here. All the functionality plus a big clear display.

http://www.saltysmarine.com/index.ph...oducts_id=2396

bigshrimpin 03-24-2010 11:06 AM

I put one on a long time ago when I owned my v20. 1988 200 Yamaha got about 2.8mpg @ 4000 rpm 31mph (11gph) 17P prop if I remember correctly.

captainmike 03-24-2010 11:28 AM

that's pretty good! I just topped it off and ran it about 3 hours but haven't topped it off yet to see what I burned. Hoping to bet about 2 1/2 - 3 mpg at cruise, but that's optimistic given I'm running a 200 vs. a 150.

NOTHING ELSE MATTERS 03-24-2010 11:38 AM

If your electronics support NMEA 2000, Garmin makes a unit to plug to your network and see it on your display head unit.

THEFERMANATOR 03-24-2010 01:09 PM

I tried one of the newer LOWRANCE units and the sensors kept failing everytime I hit a wave that was more than 2 feet tall. Went through 2 of them and then I switched to a NORTHSTAR and it only lasted 1 trip before it did the same thing. Got another one and it made it 3 trips before it quit working. I had a old FLOWSCAN awhile back though and it worked all the time no matter what and was scary accurate. If I ever buy another one it will be a FLOWSCAN as I believe you get what you pay for in this area.

bigshrimpin 03-24-2010 01:44 PM

Quote:

Originally Posted by THEFERMANATOR (Post 155403)
I tried one of the newer LOWRANCE units and the sensors kept failing everytime I hit a wave that was more than 2 feet tall. Went through 2 of them and then I switched to a NORTHSTAR and it only lasted 1 trip before it did the same thing. Got another one and it made it 3 trips before it quit working. I had a old FLOWSCAN awhile back though and it worked all the time no matter what and was scary accurate. If I ever buy another one it will be a FLOWSCAN as I believe you get what you pay for in this area.

X2 . . . Ferm your carbs went out today. Sorry I totally forgot until MJ reminded me.

macojoe 03-24-2010 01:47 PM

For me its easy, I have 100 gal gas, I have never used more the 30 gals of gas and I have gone some long ways!! Now with a new 4 stroke i never going to worrie unless I head for Europe!

captainmike 03-24-2010 02:07 PM

Ferm - is what you had something like this one here?

http://www.floscan.com/html/blue/ser...ail.php?sid=11

NOTHING ELSE MATTERS 03-24-2010 03:25 PM

I had those Flo scan on a previous diesel i had. Worked great all the time with no errors.

THEFERMANATOR 03-24-2010 07:15 PM

Quote:

Originally Posted by captainmike (Post 155413)
Ferm - is what you had something like this one here?

http://www.floscan.com/html/blue/ser...ail.php?sid=11

Mine was just like that except it only measured to 20GPH. I wish I would have never have sold it because it worked great, although they are pricey.


All times are GMT -5. The time now is 01:56 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.