Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   General (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=10)
-   -   Testing a fuel sending unit (https://forums.wmpdevserver1.com/community/showthread.php?t=13666)

bksah2 03-18-2010 09:04 AM

Testing a fuel sending unit
 
Hi all I pulled the 60 gal. fuel tank out from my V ,,drained the old gas ,pulled out the fuel sending unit,,cleaned up the tank and before i put the fuel sending unit back in is there a way to bench test it

phatdaddy 03-18-2010 01:02 PM

doing this from memeory, but put your meter on the ohm scale and touch one lead to the center post and other to the outer flange where the ground wire connects. move ther float up and down and the meter should go up or down with the float.

best thing to do is fill up, set your gps trip set to 0 , take a trip and fillup on return and figure you mileage. i haven't had a guage your 10 years and can tell you within 3 gallons when i fill up.


All times are GMT -5. The time now is 11:46 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.