Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Performance (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=15)
-   -   Fitted Storage Cover (https://forums.wmpdevserver1.com/community/showthread.php?t=12231)

Jackpops 06-29-2009 05:39 PM

Fitted Storage Cover
 
Hi, I just joined this afternoon. I've owned the same 1979 V-20 Cuddy since 1984, replaced the original 1979 Merc 150 with a '96 Merc 175 in about 2001.

Does anyone know of a place where I could purchase a new fitted storage cover for my boat? I have been using just a 12x24 silver poly tarp from Lowe's, but it is very time consuming to remove & replace.

Also, I would consider a used fitted cover if it is in reasonably good condition.

Jack, New Bern, NC

nymack66 06-29-2009 07:37 PM

Check iboats.com , Check the clearance section you might stumble on a close fit for very cheap price .

Jackpops 06-29-2009 10:45 PM

Fitted Storage Cover
 
Thanks, Nymack

I had not found iboats before. I will call at least one of the listed cover makers in the morning.
I have used various things to support the tarp that I have been using. One of the most effective at creating a "tent" shape that will not catch rainwater is a 7/16 nylon line attached to the bow pulpit anchor roller and extending over the windshield going aft over the Mercury OB. Tilting the motor down carefully gets that line pretty snug.
I also have made a wooden piece from a 1x6x 7' that slips over the top of the windshield. This piece has some rubber padding, especially on both sides of the windshield to provide a wide padded surface so that the W/S corners don't poke holes in the tarp.

Again thanks for the help.

Jack


All times are GMT -5. The time now is 09:27 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.