Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   General (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=10)
-   -   Silly Racor Question (https://forums.wmpdevserver1.com/community/showthread.php?t=12072)

boatnluvr 06-14-2009 07:51 PM

Silly Racor Question
 
Well to make a long story short, I had all sorts of fuel water issues last season, so I replaced the tank, vent, hoses, etc. My question is regarding the Racor filter. Should there always be gas in the see-through bowl? It is always full but I empty it and it seems to be just gas. Seems like a silly question, but any help appreciated.

phatdaddy 06-14-2009 08:07 PM

the bowl will always have gas in it, unless you run out. any water will go there first, if you keep on pumping water, the bowl will fill up and get into the filter.

Blue_Runner 06-15-2009 07:21 AM

Great question and from the sound of it you've licked your problem. I'm not having so much of a water problem as a trash in the fuel problem. It is probably just a matter of time before I have to do as you did.

Did you do the work or have someone do it for you? I have a poly tank, so hopefully I won't have to replace it. What kind of tank did you have?

boatnluvr 06-15-2009 07:48 AM

Quote:

Originally Posted by Blue_Runner (Post 142680)
Great question and from the sound of it you've licked your problem. I'm not having so much of a water problem as a trash in the fuel problem. It is probably just a matter of time before I have to do as you did.

Did you do the work or have someone do it for you? I have a poly tank, so hopefully I won't have to replace it. What kind of tank did you have?

I had a poly tank as well, but both the pickup and seal around the gauge were leaking. I probably could have repaired the tank but I have 6 more years on my engine warranty and I did not want to voide it. Two times last year the engine got an water in fuel error code that the dealer had to clear.

It was a simple tank replacement. No foam-in, just lifted the floor, unscrewed the straps and removed. The only thing I did not replace was the 1.5 in fill. I could not get the old one out, but it says A2 on it, so I should be ok.

Blue_Runner 06-15-2009 07:54 AM

What is A2????

boatnluvr 06-15-2009 08:07 AM

Quote:

Originally Posted by Blue_Runner (Post 142687)
What is A2????

It is the USCG approved rating for fuel lines. The fill hose has to be rated A2 and the feed hose A1.

Blue_Runner 06-15-2009 08:40 AM

A-1 Like the steak sauce LOL :beer:

Cool, thank you.

boatnluvr 06-15-2009 09:22 AM

Quote:

Originally Posted by boatnluvr (Post 142684)
I had a poly tank as well, but both the pickup and seal around the gauge were leaking. I probably could have repaired the tank but I have 6 more years on my engine warranty and I did not want to voide it. Two times last year the engine got an water in fuel error code that the dealer had to clear.

It was a simple tank replacement. No foam-in, just lifted the floor, unscrewed the straps and removed. The only thing I did not replace was the 1.5 in fill. I could not get the old one out, but it says A2 on it, so I should be ok.

BTW, I bought the tank from the Moeller OEM site through the distributor OCeanlink.com. Cost $400 for the FT5606 tank which fit perfectly in my 88.


All times are GMT -5. The time now is 07:40 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.