Which type of 2 stroke oil?
 

Being that I bought my boat towards the end of last season and I never owned an outboard prior to this I am looking to make my first purchase of 2 cycle oil. Whats the deal on this? should I only use Yamaha oil? Wally world by me sells Quicksilver for $25/gallon, Penzoil for $20/gallon and some other brand I cant remember for like $12/gallon.

What do I buy?

Imo as long as the oil you get is rated tcw3 i dont think it matters. I have used penzoil forever with great results. The walmart brand oil would be fine as well. Its according to what kind of money you are wanting to spend but for me its splitting hairs.

Pre-mix or injected? I personally run PENNSOIL synthetic blend in mine, but WAL-MART is discontinuing sales of it and is switching over to the QUIKSILVER stuff. QUIKSILVER is just an okay oil that I feel is VERY over rated for what it costs. EVINRUDE XD-30 or 50 is also a good oil that is said to work very well as well, but is a little more costly to buy(unless you buy it in bulk). YAMALUBE is also a decent oil, but I never bought into the hype behind it as I always had plug fouling issues with it.

Wally world TCW3 for me $10 a gal here, been using it for years!! But i premix. If you are injected the you better using something a little better like therm!
Also if your motor in new then you should stick to the makers brand till your warranty runs out.

I'm a pre-mixer as well, just the PENNSOIL smokes less. I don't really mind it so much, but my other half raises HE!! about it:zip:. Something about it gives her headaches, it affects me differently:love:.

thanks for the responses so far. I am still using the VRO injection. And motor is 1986 so no worries about warranties there.

I always used the Pennsoil XRD (??) its the yellow jug of 2 stroke for older outboards, or I would use the Pennsoil premium when I had my Johnson. Both were about the same, usually which ever one was in stock. You can get them both at Bass Pro if you have one. Now I am using YamaGold, damn that crap is expensive.

-Svence

Used Wally-World oil all last season, knock on wood.....no problems at all.

So Therm, you are saying you are like the rest of us two strokers,
(imagine "Ride of the Valkyre" playing in the background)
and said with a deep scratchy voice-

" I love the smell of two stroke oil in the morning"



By the way, I buy whatever is on sale, at Wally world, West marine
or whoever has a good sale,
I have the VRO still hooked up and so far, even with mixing real and synthetic,
as long as it has tcw3 on the label, I have had no issues, so far.
(I better go stroke my lucky rabits foot, now that I said that)

I would think that even the cheepest oil you can find now would be superior to what they had in 1986.

But what do I know, my motor doesn't burn oil.........yet anyways.