Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   General (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=10)
-   -   We're In ! (https://forums.wmpdevserver1.com/community/showthread.php?t=9693)

charlie_the_tuna 06-01-2008 10:37 PM

We're In !
 
finally got her in the water today.
stopped by the station on the way to the ramp and put in $130. worth of regular.
30.5 gallons.
backed her down the ramp and started her up. started right up. me and my pop then proceded to take a nice leisurely cruise.
ran around at about 1,000 rpm for a bit. temp started to sneak up to about 180 degrees.
kicked it up to about 2,700 rpm and the thermostat must have been stuck.
temp shot down to about 130-140.
opened her up for about 2 minutes and backed her back down to 1,000 rpm.
putted about for another 1/2 hour or so and headed back to the dock.

one problem. . . . . when shifting back down into neutral it would stall out. started right back up again though.
i'm thinking maybe a throttle adjustment.

other than that it ran like a dog without a leash.
gonna be a few days before i get back to her.
cant wait.

oh yeah, havent been out on a weekend day for a few years.
the whole schmuck fleet was out in force.
guys flying by at 30 plus mph within 10-15 feet of us.
a big old cigarette went by full tilt.
must have burnt $130. worth of gas just going by us.

lotta a$$holes out there.

charlie_the_tuna 06-01-2008 10:39 PM

by the way, wait til you guys see my entry for the photo contest.

i'm a shoe-in.

may as well just send me first prize right now.

THEFERMANATOR 06-01-2008 10:49 PM

MAke sure your idle speed is right, and your shift cable to the outdrive is moving freely. If your idle is a little low it may stall dis-enageing from the shift interrupt switch.

willy 06-01-2008 10:57 PM

Nice job CTT, where is the pics of the sun shining of that polished head?

charlie_the_tuna 06-01-2008 11:03 PM

ferm, once she warms up she idles at about 800.

charlie_the_tuna 06-01-2008 11:04 PM

and willy, soon. . . . soon.

THEFERMANATOR 06-01-2008 11:24 PM

Quote:

Originally Posted by charlie_the_tuna (Post 122402)
ferm, once she warms up she idles at about 800.


You may actually have it set to high which will cause it to not want to disengage. I wanna say that 650-675 is where it should be at in neutral, and about 600 in gear on a V8.

chumbucket 06-01-2008 11:41 PM

Come on. Let's see that good looking smile.
Good job Chuck.:clap:

Sean 06-02-2008 07:20 AM

:beer:Nice going:clap: Now lets see those fishing skills @ work

macojoe 06-02-2008 01:33 PM

Congrats!! And thats why I never go boating on weekends!!

charlie_the_tuna 06-02-2008 02:03 PM

either do i but my new thursday friday job doesnt start until june 16th.
so for the next two weeks i will be fishing on the weekend.
its either that or no boating and we all know that aint gonna happen.

dont worry gents you guys are gonna see some real fishing skills take place.


All times are GMT -5. The time now is 03:30 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.