Rod holder inserts
 

Ok I KNOW it is on here somewhere,but I cant find it. There is a post about a plastic company that make Rod Holder inserts (the ones for the walls) and they also make other items...takle boxes..hatches..etc...Anyone know where???

Re: Rod holder inserts
 

I used SSI located in Maryland. Very little cutting and excellent quality. Good luck

Re: Rod holder inserts
 

Got a website??

Re: Rod holder inserts
 

Try this from the Seacraft site.

http://www.steinhatcheeboatworks.com/foot_rest.htm

Re: Rod holder inserts
 

Thanks these r a start,but the ones I seen where around 100.00..Ill keep searchin, but if you know please post.

Re: Rod holder inserts
 

Flounder pounder marine. fpmarine.com. I got the 3 rod boxes last year and they fit fine w/ just a little trimming. Look good too. Look for the post in modifications under my name.

Airslot

Re: Rod holder inserts
 

THAT is it!!!THAT is the one I was looking for. They seem to be about the best priced....are yours holding up well ASG??YAAAAAAAAAAA!!!!!Found it!!!

Re: Rod holder inserts
 

Happy to report that they are holding up well, and have been well used to boot. FP Marine gave great service also.

Airslot

Re: Rod holder inserts
 

Thanks alot,i am wanting to get one of the recessed tackle holders too. ;D

Re: Rod holder inserts
 

Great, thanks alot, now I gotta add a recessed tackle locker to my winter projects list.

Thanks Stinky

Airslot

Re: Rod holder inserts
 

I'll second Flounder Pounder marine. I just ordered the 2 rod boxes, "unfinished" for 115.00 including shipping.
"Ken" at FP was great to deal with.

BTW the unfinished boxes need the holes drilled (2 inch holesaw) and bungee cord retainers installed. I'd rather save $45.00 a box and do it myself.

Re: Rod holder inserts
 

Hey AS did you have the same problem I am...It seems that the inserts are a little too smal for my cutout????

Cutout,though slanted on each ende is about 63inches at the longest point.

New inserts (according to website) 54-55 inches long

height seems to be OK...just wondering because you said you had very minimal trimming but, it looks like those wont even work on my boat w/o fiberglassing in som of the wall??

Re: Rod holder inserts
 

AS,

When you installed yours, what sealant adhesive did you use?

Re: Rod holder inserts
 

I got the 3 rod boxes. The lenght was fine but I had to trim about 1/2 or maybe 1/4" from the top of the cutout if my memory serves me. As far as sealant, I ran an experiment. I had a tude a GE tub and shower pure silicone sealant that I used since it was there. Holding up fine after a year and change.
Airslot