Deck coating??
 

After getting sticker price of $800 to $900 :o to LineX the deck of the boat,

I want to know,

What is the very best paint or epoxy that I can do myself ??

Re: Deck coating??
 

home depot, trac auto truckbed liners 60 to 70 bucks a gallon

Re: Deck coating??
 

Have you used this before??

Re: Deck coating??
 

This was recommended also http://www.nonslipcoating.com/index.htm

looks good!! will cost $135 much better then $800!!

Still looking but this might just be it??

Re: Deck coating??
 

Yeah, MJ...that looks like the deal, especially since it comes w/a marine use recommendation... ;) ;D

Re: Deck coating??
 

IF ANY OF YOU USE THIS STUFF PLEASE POST YOUR RESULTS,IM ALSO IN NEED OF SOME NON SKID PUT BACK ON MY DECK

Re: Deck coating??
 

I talked to MJ today about that Durabak stuff. I think that's the way he's going to go. Looks like good stuff to me.
MJ's gonna have lots of new pics to post this spring. ;D

Re: Deck coating??
 

Yes I am going to do it!!

But I want a vote, I need to pick a color, light grey or cream color??

What say everyone??

Re: Deck coating??
 

Mocojoe,

I think light gray would look nice. Have you considered a good epoxy paint with some fine non-skid additive?

Scott

Re: Deck coating??
 

Yea I considered it for 2 min and then just want to have to do this once!! so money aside I wanted something good!!

I am starting a color thread so we can vote on it!!

Re: Deck coating??
 

Mj, Why not just do the Interlux Brightside with the skid stuff mixed in it? Like $30 a quart and $10 for the non skid can, roll it or brush it with the brushing reducer? If you prep it good no need for primer, straight to old gelcoat. Or new gelcoat $50 to $60 with non skid stuff. But I guess its pretty cool up there yet. On the color tan is my vote.

Re: Deck coating??
 

Gray. It'll match your motor.

Re: Deck coating??
 

HEY MAKO I JUST ORDERED DURABAK COATING FOR THE DECK OF MY BOAT. I ORDERED THE NEW SAND COLOR. SHOULD I GO RIGHT OVER THE SEAM IN MY FUEL TANK HATCH? WHAT DO YOU THINK? THANKS.

Re: Deck coating??
 

I ordered mine todat, Light Gray.

I am hopeing it is as good as they say!! I asked them for instructions as to prep. I want to no if I can paint right over the paint in my boat right now?? I no I have to sand some to get all the lose stuff out and then clean with thinner first, but do you have to remove all paint to clean fiberglass??

With any luck I will be painting in a couple of weeks!!

Re: Deck coating??
 

Got the paint today!!! ;D They send you the roller, paint, can opener, and Accelerator if the temp is below 59*

Still not sure that I have to remove all the paint before I use this stuff??

Re: Deck coating??
 

MOST TIMES YOU NEED TO SAND THE LOOSE STUFF OFF, SCUFF IT ALL OVER, WIPE IT DOWN ( ACETONE WORKS WELL) IT SHOULD SAY IF YOU HACE TO USE A PRIMER OR NOT AND THEN JUST PAINT IT.
JUST SO YOU KNOW, IT'S 86 AND A LIGHT BREEZE HERE TODAY

Re: Deck coating??
 

Im wif Franco...that sounds right on the prep work....I bet that crap would just about stick to rusty metal...

Oh 78 and a south 5-10 here. ;D

Re: Deck coating??
 

MJ-

A power washer would make easy work of any loose paint for you. scuff up whats left, wipe down and paint away.

Victore - I would remove the tank hatch and paint it separately.
If not, you will end up with unsupported gaps under the coating at the hatch seams. Plus, if you ever have to open that hatch, you wont have to cut and ruin the coating!

Re: Deck coating??
 

GOOD FOLLOW UP ON THE HATCH, BY THE WAY, dab a few small drops of3M 5200 SEALER ON THE LEDGE THAT SUPPORTS THE HATCH BEFORE SCREWING IT BACK DOWN. IT HOLDS IT IN PLACE LIKE A CHAMP

Re: Deck coating??
 

Yes I was talking to CB and he agrees with us!! I will just clean sand and wipe with Xylene as stated in the instructions.
It also says that you can paint, painted meteal if the paint is good.

Looks like the beging of next week will be nice out?? I will do all the prep then. And then see when I have time to do the rest??
Wife going for operation next week will be there for 6 to 7 days then maybe rehab?? So i have to work around that.

I will have pleanty of pic's that for sure!! And CB is coming to do the pulpit with me next week!!

Re: Deck coating??
 

O yea Sunny and 50* here today but a bit windy!! ;D It won't be long now!!

Re: Deck coating??
 

Hey MJ, sanding it will feather the edges down so you get a nice smooth coat, any ridges left will just be magnified when you paint. I'm getting ready to redo my deck also. Sanding also gives the new surface something to bite into so it sticks very well. Hope it helps

Re: Deck coating??
 

Thanks, I am putting a textured coat of paint, and I have a diamond pattern right into the fiberglass. So smooth is not a concern!

http://img.photobucket.com/albums/v1...e/2dccbd10.jpg

Re: Deck coating??
 

Yours is a bit different than mine, all the texture on my deck has been worn off and I dont have a diamond texture. I filled about 50 screw holes w/ marinetex and now it looks like it has the measels

Re: Deck coating??
 

MJ...how thick is the finished coat?...will it TAPER DOWN to your new hatch-lids?... :)

Re: Deck coating??
 

2 coats are 29 to 39 mil thick. what ever that is?? It will be fine!! I think I will see how it is then I might put the 2nd coat 1/2 inch away from the first??

CB is the tool maker, how thick is 29 to 39 mil, CB??

Re: Deck coating??
 

Roughly 1/32 inch.

1/4 inch = 250 mils
1/8 = 125 mils
1/16 = 62.5 mils

Bill Mc

Re: Deck coating??
 

Mac...THANKS for puttin' it in those terms...never saw it that way...now I gotta clue... :D

Re: Deck coating??
 

Durabak ounds like some good stuff. Especially for those 1000 lb marilins that Airborne Jarhead likes to haul onto the deck. Those pointy snouts won't stand a chance against that stuff! ;)

Re: Deck coating??
 

HEY MAKO JOE , i applied the durabak coating yesterday to my boat floor. some advice; dry time for the first coat was 3 hours second coat was 5 hours , 24 hours to walk. i followed the dirctions to a tee. cool stuff, went on easy and looks great , went with the sand color. 1 gallobn was perfect with a pint to spare. temp was 50 and humidity was 30%. any questions feel free to ask.
victore.

Re: Deck coating??
 

I hope to be putting mine on Sunday, It is to be near 60*

Did you tape off any area?? did it come right off??

Did you use any excelrator??