Trailer Bunk Replacement
 

I noticed this past weekend that some of the screws holding the trailer bunks to the brackets are missing. I'm assuming the wood is rotten and needs to be replaced. Should I use pressure treated 2 x 6s and does the carpeting have to be marine grade? Do you guys have any secret material tips? Thanks Bill Mc ;D

Re: Trailer Bunk Replacement
 

I suggest pressure treated wood. Just a personal choice. I would also recommend hitting Home Cheapo for some indoor/outdoor carpeting to cover with. It's usually cheaper than buying that marine stuff at the marine stores and will probably last as long, if not longer.
MJ and I were just discussing this this afternoon. I'm working on replacing some bunks myself right now.

Re: Trailer Bunk Replacement
 

CB were your bunks through bolted (carriage bolts) or lag bolted? *Mine have lags but i'm thinking carriage with the head recessed and carpeted over. *Bill Mc ;D

Re: Trailer Bunk Replacement
 

I did this job a while back . . . just like CB said.

pressure treated wood and home cheapo indoor/outdoor (UV resistant) carpet. I used monel staples. They've held up well and look great.

Some people use a carpet glue or even a little epoxy to help the rug stick and stay flat.http://www.wellcraftv20.com/gallery/...0322.sized.jpg

Re: Trailer Bunk Replacement
 

Mac, if you go the carriage bolt route, use a washer under the bolt-head that the square shoulders of the carriage bolt will fit through...w/ out the washer, it's real easy to pull the carriage bolt head THRU the wood when you torque down on the hex-nut...like CB said, go treated...you may never have to pull this repair again... ;) ;D...

Oh yeah...I found some SS staples recently...didn't even need
'em, but HAD to buy 'em...standard T50 size x 3/8", but look for 1/2" for carpet...is Lowe's up in your neck of the woods?... :)...

Re: Trailer Bunk Replacement
 

Mine were lagged into the wood. Through bolt or lag, I don't think it makes too much difference. A little more work through bolting because you need to countersink the topside for the head to be recessed. Not a big deal though. Galv. hardware is fine as well. No need to go with stainless.

Re: Trailer Bunk Replacement
 

Galv. hardware is stromger too. Stainless isn't a stromg metal. I would Through bolt i did mine and they are much stronger. I got my carpet from a local carpet store and just asked if they had any scraps and they gave me so burber which i've found holds up great outside.

Re: Trailer Bunk Replacement
 

Thanks guys for your ideas. Its off to Lowes or Home Cheapo for supplies. bill Mc ;D

Re: Trailer Bunk Replacement
 

Just did mine.
If your going with bolts, you might try 'T-nuts'. They have virtually no profile to countersink especially after tightening and carpeting over. I'm going to lag though.

Carpet - Got it a HD. Paid .44 per sq ft (3.96 per sq yd) It is on 12' rolls and they'll cut it to what you want. The indoor/outdoor carpet was the exact carpet they had at Boater's World. The BW price was 20 for a 2x4 bunk! Same stuff.

Staples - Got the T50's in 1/2" rustproof. Stunned at the price if almost 15 bucks for a pack of staples. Looking for other stapling projects to justify it! Also used carpet adhesive to keep it tight to the wood (treated).

Look just like the above pic from BS. Someday I'll learn to post my own!

Pete

Re: Trailer Bunk Replacement
 

Wise Guy...sounds like your bunkers are about "bullet-proof"... 8)...

T-Nuts are GREAT little items...used 1/4" SS T's to mount the trollin' motor on the bow...sometime when you're feelin' a little constipated, go in West Marine and check out the price of SS T-Nuts... :o...it'll clear the pipes inna hurry... ;)...come to think of it, maybe perched atop the thundermug w/ a West catalog...same affect; less mess... ;D...

Re: Trailer Bunk Replacement
 

Rp - Pulled the original pedestal and found that it was attached from the underside with T-nuts. They had done the job there and I'm sure there is a lot of stress being applied as people rock back and forth in the seat.

Re: Trailer Bunk Replacement
 

Oh yeah...no question of their strength...but unless you go SS they ain't gonna last long... :)...

Re: Trailer Bunk Replacement
 

Got a pic now


http://i10.photobucket.com/albums/a1..._/Pict0128.jpg

Re: Trailer Bunk Replacement
 

WG nice job what type carpet, I'm looking at the .44/sq ft carpet at Home depot. Maybe I could drive down to Cleveland and borrow yours. bill Mc ;D

Re: Trailer Bunk Replacement
 

Hey Bill

Borrow!?
I don't know what they called it (sure there was some fancy name) but it was labeled as indoor/outdoor and that was the price for sure. They cut me 4 - 12 inch (generously - 17-18") pieces (1.33 Sq yds) that were 12' long. I have two side guides and two bunks along with the rollers on the bottom. I have not got to the bottoms yet. Got alot on my plate. Be glad to share or help with ANYTHING. Got a life long pal in Detroit and get that direction frequently. Love to see your rig.

Re: Trailer Bunk Replacement
 

WG it would be an extended borrowing period. I live outside of Detroit but my boat is kept a my inlaws cottage on Erie's North Shore, almost due north of Perry's Monument. I have the two lower bunks to do along with the side panel protecting the boat from tire splash. Bill Mc ;D