Transom sawing, on video.....
 

;D

transomsawfinal.wmv

Re: Transom sawing, on video.....
 

I just feel all warm and fuzzy inside knowing I inspired you to produce such a fine documentary ;D ;) ;D
Now being much older than you and having been known to step on my own d!ck once in awhile I want to give you some advise for the future.
But some GD Glasses on when your doing that work son 8)
And Stink Man by the way you rule 8)

Re: Transom sawing, on video.....
 

What you going to do next after you put some safety glasses on I mean, are you going to cut a piece of plywood to fit down in that transom?

Re: Transom sawing, on video.....
 

Willy to be honest I ALWAYS wear ear and eye protection when doing any kind of work. Even cutting with a skillsaw I normally use them both. I just got all carried away with the bra ans the camera that I guess I forgot about it. ::)

Thanks for caring though, I am touched...figuratively speaking of course. :D

Re: Transom sawing, on video.....
 

You would of steamed them up anyhow :o

Re: Transom sawing, on video.....
 

Man don't let him use that saw anymore he's dangerous. :o Next video boats cut into and being made longer. Looks good so far. Keep cutting

Re: Transom sawing, on video.....
 

Stink, You need your own Monster House Boat Building Show !!! ;D ;D ;D
But you promised to kill that Damm Dog that wouldnt stop barking, you hand the chain saw !! : ) ;D ;D ;D

Re: Transom sawing, on video.....
 

Sweet video Stank! Looks like your your well on the way to having a sweeeeeeeeeeeeeeeet ride.

Re: Transom sawing, on video.....
 

I could use some help in that area. My Buddy has some timic, but wouldnt let me have it when I told him I was gonna kill my neighbors dog. ::)

It is a stupid dog that my nieghbors got and just like most dogs was cute as a puppy and now they want nothing to do with him. I think i may "help" the dog dig out and get away when the nieghbors are gone. 8)

I may even give him a ride in the truck. ;D

Re: Transom sawing, on video.....
 

Speechless........

Good work by the way.

Airlot

Re: Transom sawing, on video.....
 

So you found the bra to restrictive heh! Interesting.
Did Mrs. Stinky find out ;D

Re: Transom sawing, on video.....
 

Yeah I showed her the video, she laughed. ;D

I just remembered, I left the bra outside on the fish cleaning table. I hope my dog doesnt find it!!! :o

Re: Transom sawing, on video.....
 

I wasn't going to open it!! I just new there was some cross dressing involed!
But looks good so far (the Boat) want to see this hole build on tape!
Can't wait!! Good Job

Re: Transom sawing, on video.....
 

Ill start a video gallery instead of pics! 8)

Re: Transom sawing, on video.....
 

Stinky just as Willy asked what are you going to fill the transom with, and how is it going to be attached to the stringers. Nice work you crazy man! Bill Mc ;D

Re: Transom sawing, on video.....
 

That was some funny sh-it!! A true classic !!!

Re: Transom sawing, on video.....
 

It will be plywood sandwiched together and glassed in. I may build it with cuts or "channels in it to allow resin to drain all the way into the bottom.

Re: Transom sawing, on video.....
 

Stink Meister can u show me a pic of the glued up transom before you slip that bad boy in

Re: Transom sawing, on video.....
 

a PIC??? I vote for a video of Stinky modeling that new transom in a nice red teddy! :o :o :o ;D

Re: Transom sawing, on video.....
 

OK we need to get a grip Tin we need to talk man ;D ;) ;D

Re: Transom sawing, on video.....
 

Hey Willy, what's this "we" stuff, maybe YOU need to get a grip:o I just wanna watch the video! ;D ;D ;D

p.s. You better clear it with Stinky first...He's probably one of those "no touching the dancer" types.

Re: Transom sawing, on video.....
 

I will have a video of it pre, during and post guys. I worked on a honey do all day today, no transom work. :( I hope maybe tomorrow.

oh and on the teddy, I cant fit into my wifes and I aint gonna by one for yall perverts! ::)


I dont mind the touching as long as dollar bills are involved. :D

Re: Transom sawing, on video.....
 

You know what I mean Tin, trying to keep you from going where no man should go 8) ;D 8)

Re: Transom sawing, on video.....
 

Hey Willy it's ok, Tin's a little touchy lol. ;D :-/

Re: Transom sawing, on video.....
 

Stink

... you one SICK puppy ... and a brave MAN too

That ain't mama's bra ... that thang is an ear warmer!!!

You're sick (and brave too) for stickin a chain saw in a transom like that !!! (and did I say efficient) ....
What a great way to eat up a chain - and I like the way you cut using the top of the Bar!!. That little thing must have jumped and bucked all over creation when you hit a screw inside the transom. How did long the job take - couple of hours - the fasted transom cleanout job recorded!!!

but Stink - be a man! - buy your buddy a new chain - don't give him back the one you used - probably only has half the teeth...

and You had those bait boxes - how big, (LxWxH) and how much ???? talk to me!!!

Great fun was LOL the whole time - !

CBill

Re: Transom sawing, on video.....
 

Also Stink ... a few production hints.....
especially when you glue up the transom...

Do it in the morining it is better - no sun in the lense.
and as mentioned in the earlier posts... we really want to see you goop it all up with glue and stick it in!

And we want good camera angle as well - and duck tape the snout on the yappy dog!!! we waht to hear you grunt as you twist and turn putting the wood into the transom...

OK got it - now go do it...

PS think epoxy - it is water proof!

Cbill

Re: Transom sawing, on video.....
 

Thanks guys. I try!! ;D

notes: bought a new chain today

time: about an hour and a half

also: not done completely, I will dull the new chain tomorrow evening, I hope. There is still some wood in the center and far out that I need to get. Chain got dull Imagine that. ;D

also2: I removed the last transon ubolt after I shot the video. Nothing to stand in the way now.

also3: the chainsaw is mine now ans the lady I got it from used to sell xmas trees and is out of that line of work...she said KEEP IT. cool, I can dig it. 8)

also4: sorry for the suns glare, I didnt notice it till i loaded it on the puter. I will take into account next time. I am also paterning the neighbor's habits so I can kill their dog when they arent there. I spent the better part of the night last night in my bushes in full camo armed with nightvision and binoculars. 8)


also...awe screw it....I am goin to (i think) cut the tops off of each side of the top cap where it meets the transom. I think this is going to be the only way to get it in in one piece. (I hope)It will result in more glassing in the end, but heck I am doing a full transom anyways, aint like I got a shortage of glassing ahead of me. ::) I will put the wood together with construction adhesive, then pour resin in the premade "channels", then glass to boat where applicable.

Re: Transom sawing, on video.....
 

hey Stink you're not running bar oil are you??? if so you'll have a hard time getting the new wood to bond. run it without bar oil just let the bar cool from time to time.

PS by the way when you get time now that it's in your blood come on up we'll have dueling chain saws cutting up one of my old boats to fit into a trash can lol.

Re: Transom sawing, on video.....
 

no, no oil.

I didnt have any before, but now that you mentioned that I certainly wont add any.

Thanks, good point! :o


Its been in my blood for awhile!! ;D

Im thinkin about making it a V24 as we speak!!! :D