Boot Stripe
 

Hey Mulv.
The wife wouldnt give up her hair dryer. Think she knew it wouldnt come back or come back with black paint all over it. Used the heat gun. Stripes came off well. Just alot of glue now to remove. tried using goof off, byt that didnt work. Will try what you said, acitone.

http://i47.photobucket.com/albums/f1...r/DSC01749.jpg

Re: Boot Stripe
 

Re: Boot Stripe
 

Good job, Hammer!!...I know you've ''been thru the mill'' on it, but you stuck it out and finished up w/ a great lookin' job ;) hats off to ya!! 8) 8) 8)

Re: Boot Stripe
 

Yea....nice job hammer....I kinda like the look without the bootstripe and painted bottom.

Re: Boot Stripe
 

Thanks Brothers.
Off to the boat now to get the glue off from the boot striping. Install bim top, deck drains.
Looks like I wont be going with a hard top. Price changed and is out of my price. Will be having a local guy enclose all 4 sides of the bim in June I figure.

Re: Boot Stripe
 

Hammer, Mulv is right. Acetone is the ticket for getting that stuff off quick and easy...

Re: Boot Stripe
 

tried the acetone and wasnt working. Used the other stuff of goo off, well, it removes tar, glue....and FREAKIN bottom Paint. The run off took off my bottom paint. Man, I just cant get ahead. !!.
Will lightly sand the sides friday and repaint. I am not RESANDING THE BOAT !!.

P.S. Working out details today on my shark/ a.k.a. Flying tigars mouth. She will be hopefully looking pretty mouthy come next week I hope. ;D

Re: Boot Stripe
 

Ham did you like the colors of your boot stripe?

Re: Boot Stripe
 

Looks sweet w/o the boot stripe and black bottom, going to do it too, nice job bud ;)

Re: Boot Stripe
 

Skools,
The boot stripes were waisted big time. Torn up and pealing in spots. Also had a older set under top set.
I can feel a thin lip where the bottom paint stops and meets the gelcoat. Dont like it. Hopefully I can smooth the edge out with the sander, but wondering when I sand, will the color fade ??

Re: Boot Stripe
 

put a black stripe over the place to smooth it out that way you won't notice the seam between the paint and gelcoat.

Re: Boot Stripe
 

Skools is right on the money as usual. That would look sweet!

I toyed with the idea of sanding the gel coat once the boot stripe is removed, but I'm not sure that's a good idea. Sanding will actually remove some of the gel coat rather than fade it.

I'd go with Skools advice...

Re: Boot Stripe
 

Hammer, The acetone will work, don't be afraid to put a lot on a rag and really rub it in. Also letting the acetone soak into the adhesive a little longer before you try wiping it off may be the answer. My stripe is raised under where the original boot stripe was removed from. I wet sanded the stripe lightly to blend it in with the rest of the hull and it worked ok. You can still see where the old boot stripe was but you cant notice when its in the water and thats all that really matters. Boats only need to look good on the water, not on the trailer.

Re: Boot Stripe
 

Skool,
Should I run the black boot stripe flush with the black bottom paint, or can I go slightly overtop of the paint. Not sure if the boot stripe will stick to the bottom paint.

Speaking of bottom paint, Looks like I'll be sanding in the morning. That goof off really damaged the bottom paint. Its all soft. Gonna try and sand it off and do it AGAIN !!. One step forward and three steps back !! :-[

Re: Boot Stripe
 

it should stick to the bottom paint i'd put the stripe with a 50/50 over lap on each half on bottom paint half on the gelcoat. i'd get the 2 inch stripe. make the stripe straight and then it won't matter ifthe bottom paint is a little off.

Re: Boot Stripe
 

Hammer,

Sometimes I use WD-40 to remove adhesive, it usually works pretty good.

Good luck,
Scott

Re: Boot Stripe
 

If you did not have access to electric what would be the best way to remove the boot stripe? Razor blade and then acetone? That's my weekend project.

Re: Boot Stripe
 

razor blades will gouge your gelcoat. Been there messed up already. park it in the sun on a 95* day and it will peel off that afternoon.

Re: Boot Stripe
 

I've had good success removing boat numbers with a hair dryer.

Re: Boot Stripe
 

Acetone is incredible but dries fast so use a lot. It wont hurt the paint or gel coat like oven cleaner will. Use a single edge razor blade to help it along but be careful. Frank

Re: Boot Stripe
 

Also don't use that acetone w/o gloves, it soaks right into your skin and is real bad sh!t, also do not use it w/o a breeze blowing or a fan on it, it will give you a major (and bad) high.

Re: Boot Stripe
 

In total disgust today. Dont even know when to begin. :-[

Re: Boot Stripe
 

Take a break...you deserve it... ;)...

Re: Boot Stripe
 

Back on track today. Boat is finally finshed again with bottom paint. Working on deck drains and fish rod holders along with boot stripe, but want the paint to cure before applying stripe.

Re: Boot Stripe
 

What a difference a day makes... ;D...

Re: Boot Stripe
 

Yeah, I know what you mean. Worked all night, then worked all day on the boat. Needed some rest and sleep. Got it back together now ;D

Re: Boot Stripe
 

managed to get the boot stripe on today. Makes a big differnce. Went on not to bad.
http://i47.photobucket.com/albums/f1...r/DSC01756.jpg

Re: Boot Stripe
 

P.S.
It only took me one try to put the boot stripe on. Not like the amount of times painting the hull. ;D ;D ;D ;D

Re: Boot Stripe
 

looks good msb....you seriously get an A for effort

Re: Boot Stripe
 

Thanks ;D ;D ;D

Re: Boot Stripe
 

??? ???Hey, does the boot stripe rap around the stern as well ???? ???

Re: Boot Stripe
 

No to the stern.

Airslot

Re: Boot Stripe
 

Now get the thing in the water!

Time to get that nice clean hull dirty!! :o

Re: Boot Stripe
 

Water ???
Hell no, was gonna park it in the front yard and put pretty little flower pots hanging over the side ;D ;D ;D

Re: Boot Stripe
 

Now Hammer be calm, it's coming brother ;)