88' Merc 150 pics, for Hammer
 

Hammer, don't know if these will help, or if they are too late? *But, they are pics none the less and we all know you love yer pics... ;D

First, the starboard side of my motor:

http://i36.photobucket.com/albums/e4...rbrakes004.jpg

Next, a closeup of the trim / tilt solenoids:

http://i36.photobucket.com/albums/e4...rbrakes005.jpg

Now, a fuzzy closer-up of the top solenoid.

http://i36.photobucket.com/albums/e4...rbrakes002.jpg

On this picture, there are two components centered. *The piece on the left is the rectifier / regulator.
http://i36.photobucket.com/albums/e4...rbrakes006.jpg

It's probably different from your 86' I'm guessing?

Airslot

88' Merc 150 pics, for Hammer
 

Hammer, don't know if these will help, or if they are too late? *But, they are pics none the less and we all know you love yer pics... ;D

First, the starboard side of my motor:

http://i36.photobucket.com/albums/e4...rbrakes004.jpg

Next, a closeup of the trim / tilt solenoids:

http://i36.photobucket.com/albums/e4...rbrakes005.jpg

Now, a fuzzy closer-up of the top solenoid.

http://i36.photobucket.com/albums/e4...rbrakes002.jpg

On this picture, there are two components centered. *The piece on the left is the rectifier / regulator.
http://i36.photobucket.com/albums/e4...rbrakes006.jpg

It's probably different from your 86' I'm guessing?

Airslot

Re: 88' Merc 150 pics, for Hammer
 

Airslot, great pics. and I think they will work. Like I said. I hear a clicking noise coming from the motor and no tilt, so I'm figuring I must replace the soliniod. Seen a used set on E-Bay for 40.00 bucks, but want to find out how much it is to replace with new.
Again thanks. ;)

Re: 88' Merc 150 pics, for Hammer
 

Airslot, great pics. and I think they will work. Like I said. I hear a clicking noise coming from the motor and no tilt, so I'm figuring I must replace the soliniod. Seen a used set on E-Bay for 40.00 bucks, but want to find out how much it is to replace with new.
Again thanks. ;)

Re: 88' Merc 150 pics, for Hammer
 

Hey Airslot, anyway of jumping the solinoid to raise it ??

Re: 88' Merc 150 pics, for Hammer
 

Hey Airslot, anyway of jumping the solinoid to raise it ??

Re: 88' Merc 150 pics, for Hammer
 

I belive that Blue Green Red & black are all for the trim. Black is ground so leave it alone, Red is the power. Blue & green is up and down.

In my Yamaha all i had to do was touch lets say green cause I for got. to the red and the motor went up, blue and the motor went down.

That got the motor up for me to work on the tilt motor. I am sure it will work for you also.

[red]BUT WAIT FOR SOMEONE THAT NO"S MERC[/red] cause I no want you blowing anything else up!! :o

Re: 88' Merc 150 pics, for Hammer
 

I belive that Blue Green Red & black are all for the trim. Black is ground so leave it alone, Red is the power. Blue & green is up and down.

In my Yamaha all i had to do was touch lets say green cause I for got. to the red and the motor went up, blue and the motor went down.

That got the motor up for me to work on the tilt motor. I am sure it will work for you also.

[red]BUT WAIT FOR SOMEONE THAT NO"S MERC[/red] cause I no want you blowing anything else up!! :o

Re: 88' Merc 150 pics, for Hammer
 

So, I shouldnt grab the screw driver just yet and start touching stuff just yet, ;D

Re: 88' Merc 150 pics, for Hammer
 

So, I shouldnt grab the screw driver just yet and start touching stuff just yet, ;D

Re: 88' Merc 150 pics, for Hammer
 

It might be a shocking moment!! :o

I would not cross the screws with a screw driver!! But remove the green and touch to the red, if goes up your set, if it goes down then do the same with the blue.

I would have done it all ready but thats me ::)

Re: 88' Merc 150 pics, for Hammer
 

It might be a shocking moment!! :o

I would not cross the screws with a screw driver!! But remove the green and touch to the red, if goes up your set, if it goes down then do the same with the blue.

I would have done it all ready but thats me ::)

Re: 88' Merc 150 pics, for Hammer
 

Hammer,

Make sure you got one of those donuts in your mouth while you touch the wires, in case you get shocked, you got something to bite down on due to pain ;D

Re: 88' Merc 150 pics, for Hammer
 

Hammer,

Make sure you got one of those donuts in your mouth while you touch the wires, in case you get shocked, you got something to bite down on due to pain ;D

Re: 88' Merc 150 pics, for Hammer
 

LOL!!!!

Re: 88' Merc 150 pics, for Hammer
 

LOL!!!!

Re: 88' Merc 150 pics, for Hammer
 

Jelly or creme filled. ;D
Thanks guys. If the weather
is good this weekend, I'll be out touching live wires. *;D

Re: 88' Merc 150 pics, for Hammer
 

Jelly or creme filled. ;D
Thanks guys. If the weather
is good this weekend, I'll be out touching live wires. *;D

Re: 88' Merc 150 pics, for Hammer
 

You can jump power to the blue or green wire for up / down. You won't hurt anything.

Before that, with the cowling off, see if that may be where the clicking is coming from. I gentle tap with the screw driver may free the sticking relay, temporarily.

Airslot

Re: 88' Merc 150 pics, for Hammer
 

You can jump power to the blue or green wire for up / down. You won't hurt anything.

Before that, with the cowling off, see if that may be where the clicking is coming from. I gentle tap with the screw driver may free the sticking relay, temporarily.

Airslot

Re: 88' Merc 150 pics, for Hammer
 

Thats what I'm hoping for Airslot, always worked well until that cold spell, then nothing.

Re: 88' Merc 150 pics, for Hammer
 

Thats what I'm hoping for Airslot, always worked well until that cold spell, then nothing.