|
Transom Trim
When I replace my motor I'd like to replace the cap of the transom. *Has any one replace theirs and if so with what? *Thanks Billy Mac
Here's a photo of what I'd like to replace. http://img.photobucket.com/albums/v1...ckey/Trim3.jpg |
Transom Trim
When I replace my motor I'd like to replace the cap of the transom. *Has any one replace theirs and if so with what? *Thanks Billy Mac
Here's a photo of what I'd like to replace. http://img.photobucket.com/albums/v1...ckey/Trim3.jpg |
Re: Transom Trim
I don't have that piece but most are made from angle alum.
But you will not be able to duplcate the curve like that, you will have to piece it or cut it to bend it. Whats wrong with the one you have?? Can't see any damage from the poic you showed? |
Re: Transom Trim
I don't have that piece but most are made from angle alum.
But you will not be able to duplcate the curve like that, you will have to piece it or cut it to bend it. Whats wrong with the one you have?? Can't see any damage from the poic you showed? |
Re: Transom Trim
If I were to remove my trim, I'd get some 4" tape (glass) and some epoxy. Remove the trim, sand the area, a lay up a few layers with the glass tape. That way the the seam is sealed better to water. Before starting I'd tape off the area in a straight line, then paint when finished.
Airslot |
Re: Transom Trim
If I were to remove my trim, I'd get some 4" tape (glass) and some epoxy. Remove the trim, sand the area, a lay up a few layers with the glass tape. That way the the seam is sealed better to water. Before starting I'd tape off the area in a straight line, then paint when finished.
Airslot |
Re: Transom Trim
There are some cracks in the plastic. I just thought that if the motor is removed I replace it. I know if it ain't broke don't fix it. Billy Mac ;D
|
Re: Transom Trim
There are some cracks in the plastic. I just thought that if the motor is removed I replace it. I know if it ain't broke don't fix it. Billy Mac ;D
|
Re: Transom Trim
here's how i fixed that 21 i'm doing it had Aluminum from factory but that gap under those covers is a spot that starts transom rot
Before http://i8.photobucket.com/albums/a46...1/MVC-020S.jpg http://i8.photobucket.com/albums/a46...1/MVC-008S.jpg Had to do some epoxy and micro ballons repairs http://i8.photobucket.com/albums/a46...1/MVC-014S.jpg http://i8.photobucket.com/albums/a46...aco21_002S.jpg http://i8.photobucket.com/albums/a46...aco21_003S.jpg http://i8.photobucket.com/albums/a46...aco21_004S.jpg http://i8.photobucket.com/albums/a46...21/MVC-037.jpg Before Epoxy Primer [img] http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/Monaco21_041S.jpg[/img] http://i8.photobucket.com/albums/a46...aco21_037S.jpg http://i8.photobucket.com/albums/a46...aco21_036S.jpg http://i8.photobucket.com/albums/a46...aco21_039S.jpg http://i8.photobucket.com/albums/a46...aco21_035S.jpg http://i8.photobucket.com/albums/a46...aco21_034S.jpg After sanding the hull for primer and primed the transom. http://i8.photobucket.com/albums/a46.../21Boat037.jpg http://i8.photobucket.com/albums/a46.../21Boat035.jpg http://i8.photobucket.com/albums/a46.../21Boat034.jpg http://i8.photobucket.com/albums/a46.../21Boat042.jpg http://i8.photobucket.com/albums/a46...21Boat-095.jpg After After the paint on the hull and transom http://i8.photobucket.com/albums/a46...21Boat-224.jpg |
Re: Transom Trim
Nice job Skools. I'm looking for a quick fix unless when the plastic is removed it uncovers a problem. Thanks Billy Mac ;D
|
Re: Transom Trim
Nice job Skools. I'm looking for a quick fix unless when the plastic is removed it uncovers a problem. Thanks Billy Mac ;D
|
Re: Transom Trim
you can go to Lowes and buy Aluminum Angle *and cut to fit that's what i did on this boat installed with stainless screws.
http://i8.photobucket.com/albums/a46...ed_boat_24.jpg http://i8.photobucket.com/albums/a46...ed_boat_33.jpg http://i8.photobucket.com/albums/a46...ed_boat_32.jpg |
Re: Transom Trim
you can go to Lowes and buy Aluminum Angle *and cut to fit that's what i did on this boat installed with stainless screws.
http://i8.photobucket.com/albums/a46...ed_boat_24.jpg http://i8.photobucket.com/albums/a46...ed_boat_33.jpg http://i8.photobucket.com/albums/a46...ed_boat_32.jpg |
Re: Transom Trim
or just gut it like this one i have lol
http://i8.photobucket.com/albums/a46...sea_ox_016.jpg http://i8.photobucket.com/albums/a46...x/MVC-027S.jpg |
Re: Transom Trim
or just gut it like this one i have lol
http://i8.photobucket.com/albums/a46...sea_ox_016.jpg http://i8.photobucket.com/albums/a46...x/MVC-027S.jpg |
Re: Transom Trim
SKOOL, clear your schedule, I'm sending Randleman up to ya. ;D
|
Re: Transom Trim
SKOOL, clear your schedule, I'm sending Randleman up to ya. ;D
|
Re: Transom Trim
ok cleared till Friday night i'm going Coastal to pick up another trailer don't you want a tandem Hammer come on down i'll give ya the great deal lol.
Mac you just want me to send my Girl there to fix your transom? she helped and did alot of the transom work on the 21 project she actually likes boat repairing. |
Re: Transom Trim
ok cleared till Friday night i'm going Coastal to pick up another trailer don't you want a tandem Hammer come on down i'll give ya the great deal lol.
Mac you just want me to send my Girl there to fix your transom? she helped and did alot of the transom work on the 21 project she actually likes boat repairing. |
Re: Transom Trim
What school did is very nice. I use the aluminum angel stuff and cut to fit but my cap got trashed whe we took it off so I had to make something. Yours looks pretty claen I would just repair the cracks and give it a coat of pait. My transom is sealed on the top so I could leave it uncovered but it would look like crap.
|
Re: Transom Trim
What school did is very nice. I use the aluminum angel stuff and cut to fit but my cap got trashed whe we took it off so I had to make something. Yours looks pretty claen I would just repair the cracks and give it a coat of pait. My transom is sealed on the top so I could leave it uncovered but it would look like crap.
|
| All times are GMT -5. The time now is 06:06 AM. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.