who all has replaced there Rubrail
 

Ok i'm looking at new rubrails for the 21 project and the V20 as well. What length have you used on your V20's? I measured the one off my 21 project and it's 47.5 ft. I called my neighbor from Parker boats. he said that a new kit for their 21's are 51 ft total. and is $111.50 complete kit how's that sound to you guys on price as well?

who all has replaced there Rubrail
 

Ok i'm looking at new rubrails for the 21 project and the V20 as well. What length have you used on your V20's? I measured the one off my 21 project and it's 47.5 ft. I called my neighbor from Parker boats. he said that a new kit for their 21's are 51 ft total. and is $111.50 complete kit how's that sound to you guys on price as well?

Re: who all has replaced there Rubrail
 

I'm not the authority on rub rails but $111 doesn't sound bad if that includes the channel and the insert.

I need a new insert for mine. Channel is fine. I don't know how to make sure a new insert is going to fit aside from ordering a 1ft piece and testing it first?? I don't even know if you can do that.

The problem is I don't know what brand the previous owner went with when he replaced it.

Re: who all has replaced there Rubrail
 

I'm not the authority on rub rails but $111 doesn't sound bad if that includes the channel and the insert.

I need a new insert for mine. Channel is fine. I don't know how to make sure a new insert is going to fit aside from ordering a 1ft piece and testing it first?? I don't even know if you can do that.

The problem is I don't know what brand the previous owner went with when he replaced it.

Re: who all has replaced there Rubrail
 

yeah BR this is a full kit with 2 end caps, stainless screws, insert, and channel.

Re: who all has replaced there Rubrail
 

yeah BR this is a full kit with 2 end caps, stainless screws, insert, and channel.

Re: who all has replaced there Rubrail
 

That sounds very cheap if you ask me. Is that a special price for you or their every day price?

Re: who all has replaced there Rubrail
 

That sounds very cheap if you ask me. Is that a special price for you or their every day price?

Re: who all has replaced there Rubrail
 

their employee price. but all you need is to know a person there or askany employee to get it for you. i'm sure all boat manufacters will sell out right as well.

Re: who all has replaced there Rubrail
 

their employee price. but all you need is to know a person there or askany employee to get it for you. i'm sure all boat manufacters will sell out right as well.

Re: who all has replaced there Rubrail
 

that sounds like a hell of a deal to me. I dont think you will be able to find a better price anywhere. :-/

Re: who all has replaced there Rubrail
 

that sounds like a hell of a deal to me. I dont think you will be able to find a better price anywhere. :-/

Re: who all has replaced there Rubrail
 

My exwife replaced my rubrail.

Re: who all has replaced there Rubrail
 

My exwife replaced my rubrail.

Re: who all has replaced there Rubrail
 

Thats a good price!! My friend payed that for a 13' whaler!!

BR, cut a small piece of yours and do a search on the net, you will see pictures of all the shapes, and just match it up.

Thats what we did for the whaler.

I like to replace mine some day, but it is all Aluminum and solid ;)

Re: who all has replaced there Rubrail
 

Thats a good price!! My friend payed that for a 13' whaler!!

BR, cut a small piece of yours and do a search on the net, you will see pictures of all the shapes, and just match it up.

Thats what we did for the whaler.

I like to replace mine some day, but it is all Aluminum and solid ;)

Re: who all has replaced there Rubrail
 

Skools, it's a helluva deal if it's the right rub-rail looks wise...on that boat, I'd lean toward black w/black insert...


I had mine off last year ... removed all half-a$$ed rivets ::) and put 'er back on w/ 147 SS screws (that reattached the cap and put the RR back...)...the rope insert on mine had gotten nasty, so I found new rope that would fit and put it back in there... ;) ...


I like this one for your boat...more than yer talkin' about, but...

http://www.iboats.com/1_3_8_x_1_1_16...view_id.271912







Hey Skools...is this the windshield tape yer lookin' for?

http://www.iboats.com/Windshield_Foa...-view_id.40192

Re: who all has replaced there Rubrail
 

Skools, it's a helluva deal if it's the right rub-rail looks wise...on that boat, I'd lean toward black w/black insert...


I had mine off last year ... removed all half-a$$ed rivets ::) and put 'er back on w/ 147 SS screws (that reattached the cap and put the RR back...)...the rope insert on mine had gotten nasty, so I found new rope that would fit and put it back in there... ;) ...


I like this one for your boat...more than yer talkin' about, but...

http://www.iboats.com/1_3_8_x_1_1_16...view_id.271912







Hey Skools...is this the windshield tape yer lookin' for?

http://www.iboats.com/Windshield_Foa...-view_id.40192

Re: who all has replaced there Rubrail
 

That's a good deal, but before you buy it measure with a tape and be sure. I helped install this one and rubrails are definitely a 2 man job. Wait for a warm day when the rubber is soft.

http://www.casdvm.com/photos/DSCN4047.JPG
http://www.casdvm.com/photos/DSCN4045.JPG
http://www.casdvm.com/photos/DSCN4049.JPG

Re: who all has replaced there Rubrail
 

That's a good deal, but before you buy it measure with a tape and be sure. I helped install this one and rubrails are definitely a 2 man job. Wait for a warm day when the rubber is soft.

http://www.casdvm.com/photos/DSCN4047.JPG
http://www.casdvm.com/photos/DSCN4045.JPG
http://www.casdvm.com/photos/DSCN4049.JPG

Re: who all has replaced there Rubrail
 

$111.50 sounds like a pretty good deal to me

Re: who all has replaced there Rubrail
 

$111.50 sounds like a pretty good deal to me

Re: who all has replaced there Rubrail
 

Skools, I have priced em and thats a HELLUVA deal...Id jump on that like Willy on Lisa. ;)

Re: who all has replaced there Rubrail
 

Skools, I have priced em and thats a HELLUVA deal...Id jump on that like Willy on Lisa. ;)

Re: who all has replaced there Rubrail
 

lol poor hammer :o

Re: who all has replaced there Rubrail
 

lol poor hammer :o

Re: who all has replaced there Rubrail
 

Parker only use's black on black so i'm thinking about buying 2 sets and put one on the V20 as well. 51 ft is plenty for them.

Here's a pic of the 07 Parker 21 SE so here's the same rubrail

http://images.traderonline.com/img/6...81399819_1.jpg

Re: who all has replaced there Rubrail
 

Parker only use's black on black so i'm thinking about buying 2 sets and put one on the V20 as well. 51 ft is plenty for them.

Here's a pic of the 07 Parker 21 SE so here's the same rubrail

http://images.traderonline.com/img/6...81399819_1.jpg

Re: who all has replaced there Rubrail
 

i put a black rub rail simular to the one on the Parker on my 17 Mitchell last year, even with my company discount( don't tell any one) I paid $150 for enough rub rail to do my boat, add in stainless machine screws( i thru bolted it as it was a rolled edge boat), nylock nuts and washers, I had close to $200 in the job before I was done. I did it by myself, but I will never attempt it solo again, it showed when it was finished.

Re: who all has replaced there Rubrail
 

i put a black rub rail simular to the one on the Parker on my 17 Mitchell last year, even with my company discount( don't tell any one) I paid $150 for enough rub rail to do my boat, add in stainless machine screws( i thru bolted it as it was a rolled edge boat), nylock nuts and washers, I had close to $200 in the job before I was done. I did it by myself, but I will never attempt it solo again, it showed when it was finished.

Re: who all has replaced there Rubrail
 

For the rubber insert if you heat up a big pot of water and add liquid dish detergent. Let the insert soak for a few min. and it will slide in nice and easy. I'd keep the pot and the rail in it as you do the job. Also try and cram in as much as you can before cutting it off as it will shrink over time.

Re: who all has replaced there Rubrail
 

For the rubber insert if you heat up a big pot of water and add liquid dish detergent. Let the insert soak for a few min. and it will slide in nice and easy. I'd keep the pot and the rail in it as you do the job. Also try and cram in as much as you can before cutting it off as it will shrink over time.

Re: who all has replaced there Rubrail
 

Good ideas there... ;) ...

Re: who all has replaced there Rubrail
 

Good ideas there... ;) ...

Re: who all has replaced there Rubrail
 

Thanks, I use to install door gaurds back when not all cars had them and thats where I learned that trick. It works with just about anything rubber that has to slide into an insert.

Re: who all has replaced there Rubrail
 

Thanks, I use to install door gaurds back when not all cars had them and thats where I learned that trick. It works with just about anything rubber that has to slide into an insert.

Re: who all has replaced there Rubrail
 

On the rub rail we did on the whaler the insert did just that shrink!! He is about 2" short now, but he doesn't care, so neither do I!!

Good info!!

Re: who all has replaced there Rubrail
 

On the rub rail we did on the whaler the insert did just that shrink!! He is about 2" short now, but he doesn't care, so neither do I!!

Good info!!

Re: who all has replaced there Rubrail
 

didnt kamikaze do his rubrail?

Re: who all has replaced there Rubrail
 

didnt kamikaze do his rubrail?