Transducer replacement
 

What would I use to fill screw holes that will be under water. I'm installing my new FF and transd and paddle wheel. thanks Billy Mac ;D

Transducer replacement
 

What would I use to fill screw holes that will be under water. I'm installing my new FF and transd and paddle wheel. thanks Billy Mac ;D

Transducer replacement
 

What would I use to fill screw holes that will be under water. I'm installing my new FF and transd and paddle wheel. thanks Billy Mac ;D

Re: Transducer replacement
 

small holes like that can be done a few ways.

#1 and best way, Formula 27, fill and sand, Marine Tex will also be fine!!

#2 Take a Golf T put in resin hamer into the hole, let dry, cut end off. Great to fix screw holes in deck also!


#3. 5200 will work fine. (make sure to put 5200 on new screws)

Re: Transducer replacement
 

small holes like that can be done a few ways.

#1 and best way, Formula 27, fill and sand, Marine Tex will also be fine!!

#2 Take a Golf T put in resin hamer into the hole, let dry, cut end off. Great to fix screw holes in deck also!


#3. 5200 will work fine. (make sure to put 5200 on new screws)

Re: Transducer replacement
 

small holes like that can be done a few ways.

#1 and best way, Formula 27, fill and sand, Marine Tex will also be fine!!

#2 Take a Golf T put in resin hamer into the hole, let dry, cut end off. Great to fix screw holes in deck also!


#3. 5200 will work fine. (make sure to put 5200 on new screws)

Re: Transducer replacement
 

Formula 27 or marine tex? I have some marine tex. West marine carries F27 I assume? Thanks MJ Billy Mac ;D

Re: Transducer replacement
 

use what you have!! Marine tex is perfect if thats what you have on hand!! F27 is very were Boaters world, hardware stores ect ect..

Re: Transducer replacement
 

Put on as smooth as you can!! that stuff sands like Iron!!

Re: Transducer replacementt
 

Don't forget, immediately after applying two part epoxy such as Marine Tex, wet it (water or spit works best) and smooth out the repair to avoid lots of sanding.

Re: Transducer replacement
 

you can use wax paper over it and squeegee it smooth

Re: Transducer replacement
 

Thanks guys! Billy Mac ;D

Re: Transducer replacement
 

I like MJ's golf tee idea, seeing as how I've got 20,000 of them sitting in front of me ;D

Re: Transducer replacement
 

It works great for screw holes in the deck and stuff! I have even used them in my house for worn door hinge holes, gule hammer cut rescrew works out great!!

Re: Transducer replacement
 

MJ's been watching MacGyver. The golf tee is a great idea.

Re: Transducer replacement
 

Glad you guys like it!! Wish I could say I thught it up, but some one showed me like 12 years ago. ;) ;D