|
Re: Skool's V20 Rebuild starts
And were off!! ;)
|
Re: Skool's V20 Rebuild starts
Man you wore that deck out in nothing flat 8) 8)
I noticed that deck didn't have individual wood blocks fiberglassed to the underside. Also how are you going to replace it? |
Re: Skool's V20 Rebuild starts
Might I ask why you chose to cut it out rather than seperate the cap and hull? I ask because mine needs a new floor and transom and I thought it would be easier to just seperate the two rather than section it out.
|
Re: Skool's V20 Rebuild starts
All I can say is wow Skools! I doubt I could ever attempt the projects you have taken on. My hat is off to you.
|
Re: Skool's V20 Rebuild starts
to much work to remove the cap my V has a solid new transom, and by the way it had the blocks under the floor i just finished taking them off more pics tomorrow, i'm going to remove the extra tank inthe boat it has a 60 gal and an added 25 gal, i'm taking out the 25 and going to add foam to the hull in all the voids to add floation.
|
Re: Skool's V20 Rebuild starts
Woulda SWORE that floor-deck would be a lil' beefier than what's layin' on the ground :) ...nothin' between that and stringer?...
Strap in boys...this'll be fun to watch...somebody plug in the popcorn popper ;) ... |
Re: Skool's V20 Rebuild starts
same thoughts Reel the floor was 1/2 inch reg plywood scrap blocks but i'm replacing with same wood i used in the floor hatch for my 21. i'm using 3/4 13 ply marine wood ;D she'll be strong as hell when this floor is completed and i want to add a few stringers to solid up some areas.
|
Re: Skool's V20 Rebuild starts
Quote:
This is gonna be better than Netflix. http://i52.photobucket.com/albums/g1...d20popcorn.gif |
Re: Skool's V20 Rebuild starts
Possibly rival W.E.T. ;) ...
|
Re: Skool's V20 Rebuild starts
Come on now, get real Ozzie ;D
|
Re: Skool's V20 Rebuild starts
Willy i may have super models working on it in pics ;D
|
Re: Skool's V20 Rebuild starts
Quote:
In that case it'll outrun W.E.T. 8) ... |
Re: Skool's V20 Rebuild starts
Hey Skools, ya need some resin? ;D
|
Re: Skool's V20 Rebuild starts
OK Skools, in that case bring it on ;D
|
Re: Skool's V20 Rebuild starts
Quote:
lol well i still have about 3 gallons lol how much do you have still lol |
Re: Skool's V20 Rebuild starts
here's the junk wood removed that Wellcraft used
http://i8.photobucket.com/albums/a46...t/MVC-001S.jpg http://i8.photobucket.com/albums/a46...MVC-002S-1.jpg http://i8.photobucket.com/albums/a46...MVC-003S-1.jpg |
Re: Skool's V20 Rebuild starts
I've heard they used small squares of ply wood, but damm! *Why would they do that instead of just one or two big sheets?
|
Re: Skool's V20 Rebuild starts
dam, makes me want to NEVER fix my floor, not that there is anything wrong with it. :-/
|
Re: Skool's V20 Rebuild starts
I would like to start the bidding at $3500 ::) ;D
|
Re: Skool's V20 Rebuild starts
you can almost buy it for that once i'm finished ;D
|
Re: Skool's V20 Rebuild starts
Quote:
|
Re: Skool's V20 Rebuild starts
Quote:
|
Re: Skool's V20 Rebuild starts
I've never seen one with the engine mounted in the splash well.
|
Re: Skool's V20 Rebuild starts
lol new location for outboards lol mine only needed a floor so no need to go to the trouble of the cap removal, i hope to ask $5000 for the boat turn key when finished, depends on how much it takes to get right.
|
Re: Skool's V20 Rebuild starts
Skools, awesome man...I'll be there this evening after work - what kinda beer you drink? ;D
|
Re: Skool's V20 Rebuild starts
Lookin Good SKOOL. Dont forget those custom Port holes now. ;D
|
Re: Skool's V20 Rebuild starts
Quote:
Can't wait to see finished "V" 8) ... |
Re: Skool's V20 Rebuild starts
sorry guys i only marked the stringers on the floor today soi can lay out the wood floor to it's strongest way ;D ;D
http://i8.photobucket.com/albums/a46...MVC-001S-1.jpg http://i8.photobucket.com/albums/a46...MVC-002S-2.jpg http://i8.photobucket.com/albums/a46...MVC-003S-2.jpg http://i8.photobucket.com/albums/a46...MVC-004S-1.jpg http://i8.photobucket.com/albums/a46...MVC-005S-1.jpg |
Re: Skool's V20 Rebuild starts
SKOOL, you whats the next step on the floor. Will you cut pieces of plywood to fit the shape of the floor skin, then resin each piece to the deck.
Keep going, dont stop. ;) |
Re: Skool's V20 Rebuild starts
Skools...looks like a smaller tank forward of the main ... whazzat ??? ...
When ya put new floor back in, do ya put a lip under the outter edge to catch?... |
Re: Skool's V20 Rebuild starts
What is the deal with WellCraft and these little 6x6 pieces of wood they use. The only thing I could think of is they have a slight gap between them and the resin runs between them. If one gets water in it the others have a little protection from the resin between them. By changing to 3/4 wood won't that make it a little tougher to complete the flooring.
|
Re: Skool's V20 Rebuild starts
Well.....is it done yet SKOOL. ;D
Where's the Pics. Bro. Dont wanna hear no excuse's that you were sleeping. You never Sleep. ;D ;D |
Re: Skool's V20 Rebuild starts
These old guys never read!! Just look at the pictures!!
Quote:
|
Re: Skool's V20 Rebuild starts
Quote:
Alright, alright...I missed it, but yer the pot callin' the kettle black :-* ... |
Re: Skool's V20 Rebuild starts
since i'm working on the 230 Sea Ox, so the V is on a temp hold, but almost done with the 230C, well the 1/2 to 3/4 will be fine i'm filling the gap around the edge and will make a channel on the sides to run the water off the deck. i may curve the floor to run the water to the sides too.
|
Re: Skool's V20 Rebuild starts
Quote:
"Schools Fancy" "V Fancy" or "Well Fancy" |
Re: Skool's V20 Rebuild starts
yeah i like to put my own twist in my projects did you see the dash upgrade in the 21 project ;D
|
Re: Skool's V20 Rebuild starts
Not sure if I did or not but I'll check it out.
|
Re: Skool's V20 Rebuild starts
Le touch de la Skools 8) ...
|
| All times are GMT -5. The time now is 05:11 PM. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.