![]() |
Re: V20 stopped now Jet Ski repairs from WRECK
Did you wreck that in the water or on the trailer?
Either way, did you get hurt? |
Re: V20 stopped now Jet Ski repairs from WRECK
make the waterways a safer place, send the ski to the dump( take a couple with it)
|
Re: V20 stopped now Jet Ski repairs from WRECK
Looks to me like SOMEBODY got hurt! :o
|
Re: V20 stopped now Jet Ski repairs from WRECK
Are hulls that hard to come by where you live?
Here in west florida, good solid PWC hulls are tossed out all the time. Heck, I have a complete Seadoo that ran great last time I had it out (2 years ago), perfect hull, was running motor, 100% complete, includes trailer, that I would love to unload for $200. Weather and sitting now has it looking rough. No takers so far after 18 months. I know couple people with perfect spare hulls that might pay you to get them out of their yards. Edit: here is what a typical $400 (when I bought it) runs great PWC w/trailer looks like: http://www.wellcraftv20.com/gallery/...p;id=SeadooFrt |
Re: V20 stopped now Jet Ski repairs from WRECK
yeah i wrecked it yrs ago but figured i'd fix it and ride some this winter, it's not one that is made anymore this is an old 1982 Kawasaki 400 Standup, Spare you're just pissed that you can't ride a standup ski. I had 3 others at the time so i took the race motor out put in another hull, but kept the 550 race motor out of another for this one so the day i fixed it i would be ready to ride. i only have 1 of the stand ups running now. it's at the beach and has my fastest race mod motor in it. it was a 440 when it started life but now it's a 575 with twin 44 mm carbs and msd ign. it runs around 78 +/- MPH. going to fix this one play with it till spring then sell it. i hit the bottom of the ocean jumping waves before a hurricane back in 96 with it. thats what sand will do when your ski lands nose first. it sunk but i drug it in and kept it to remind me to be in deeper water lol.
|
Re: V20 stopped now Jet Ski repairs from WRECK
stand up, sit down, who cares. I've never riddin any of them. If i do, I might like it, then I can't compain about them ruining the water ways ;D
|
Re: V20 stopped now Jet Ski repairs from WRECK
Quote:
Ive ridden em both and they still suck. ;D |
Re: V20 stopped now Jet Ski repairs from WRECK
I'm with you stinky ;D
the lake I use to work on was ruined by jet skis( iI refuse to call them boats), they would take over the ramp and pull wake boards thru the no wake zone. they followed every boat going out jumping their wakes. they used to get pi$$ed when I would run up behind them and jump their wakes with a 20 ft ski boat. At lake Tillery in NC, the land owners are pitted against each other because of the skis, from sun up to sun down, all you here on that lake are skis constantly running. you either have one or you hate them. Down here on the coast, they arn't too bad. I have seen them pull dock start skiers off the docks at the ramps, and they allways seem to practice driving in circles just close enough to the boat I'm working on to keep it rocking. Sooner or later they end up in an oyster bed "ouch". Yes I know they are not all bad, it just seems that the bad apples are drawn to jet skis. A friend of mine told me once that ridding a snow mobile in a safe and responsible manner is broing as watching snow melt, but cutting a fool on one is a blast. I guess it goes with jet skis as well, driving one around in a safe and responsible manner gets boring. But you know if i drove my V like some jet ski drivers do, I would get a ticket for unsafe operaton. I saw a ski at the boat show a couple of years ago that had a booming stereo on it(big 12" woofers), i walked up to the sales man with several customers around and told him I didn't think you could make jet ski any more annoying, but by putting a loud stereo on it, you did. |
Re: V20 stopped now Jet Ski repairs from WRECK
like i said spare you only hate them cause you can't ride them. i happen to own 6 boats and 5 jet skis and i hate other jet skiers, they all ride like dumbass's but the ones that own boats they have some sense to their riding. it's ok to hate them just remember the day your boat knocks off and the only guy you find is a Jet ski and he offers to tow you in then just better say no my dumbass will row. i've towed in boats with my skis. i went out the day after the last fall hurricane on my jet ski to find my poor neighbors boat that floated off the lift. i knew the jet ski was shollower and lighter to drag if i shall hit something plus less to fix if i hit a sunken item than my boat. but it's ok if you loose your boat don't ask a nice jet ski owner to bring it back just leave it lost. ;D ;D
|
Re: V20 stopped now Jet Ski repairs from WRECK
funny you should say that Schools, several years ago, I was riding with a friend of mine in his boat test running a new prop, after a couple of speed runs, we were idling down a cove when the motor suddenly locked up(stuck a ring on a port, broke the top of the piston off). having nothing better to do, we started pulling the head off the engine while we waited for some one to come by for a tow. An aquantence came by on his jet ski and asked if we were OK, my buddy said were fine, just tinkering with the motor and waved him off. we had plenty of beer and it was early in the day, so what the hell, the guy on the ski was real good and proceded to put on quite a show while we just kicked back. A little later, another friend came by in his eliminator, my buddy said, it was OK to be towed by an eliminator, but not by a ski. Had we run out of beer, it might have been different.
|
Re: V20 stopped now Jet Ski repairs from WRECK
ground the nose out and it's super closeto being right then patched the nose on the tip and lip to get that area right now. soon i'll be flying on her. Stink come on up i'll put ya on the race mod stand up it will blow yer thongs right off and make you wet them lol.
|
Re: V20 stopped now Jet Ski repairs from WRECK
Quote:
It's SKOOL'S get it right lol |
Re: V20 stopped now Jet Ski repairs from WRECK
tonights glass is finally dry
http://i8.photobucket.com/albums/a46...MVC-001S-2.jpg http://i8.photobucket.com/albums/a46...MVC-002S-1.jpg http://i8.photobucket.com/albums/a46...MVC-004S-2.jpg http://i8.photobucket.com/albums/a46...MVC-006S-2.jpg http://i8.photobucket.com/albums/a46...MVC-005S-2.jpg http://i8.photobucket.com/albums/a46...MVC-007S-2.jpg http://i8.photobucket.com/albums/a46...MVC-009S-2.jpg http://i8.photobucket.com/albums/a46...MVC-008S-2.jpg here's the lil beast for this puppy http://i8.photobucket.com/albums/a46...MVC-010S-1.jpg http://i8.photobucket.com/albums/a46...MVC-011S-2.jpg |
Re: V20 stopped now Jet Ski repairs from WRECK
sorry SKOOLS, didn't know you spelled it that way on purpose, I just figured it was the way Alamance Co. Public Schools taught it ;D
|
Re: V20 stopped now Jet Ski repairs from WRECK
hey smart *** i work for the state and contracted to the schools and my wifie is a school teacher, if you were a real fisherman you'd know how to spell Skool for a skool of fish not for learning. spare you are getting on my nerves now.
|
Re: V20 stopped now Jet Ski repairs from WRECK
:-X :-X :-X :-X :-X ::) ::) ::) ::)
|
Re: V20 stopped now Jet Ski repairs from WRECK
Quit playing with your other toys SKOOL. Work on the V. *>:(
8) |
Re: V20 stopped now Jet Ski repairs from WRECK
easy SKOOLS, just joking around ;D, I'm a product of Wake Co. Schools and you see how bad my spelling is.
|
Re: V20 stopped now Jet Ski repairs from WRECK
Hey Skools, lets take 2 of them jetskis, build two fiberglass tubes and mount the motor and pumps inside and make a jetski powered pontoon/cat boat. Whatcha think?
|
Re: V20 stopped now Jet Ski repairs from WRECK
Can't you Carolina motorheads get along?! Must be a OMC vs Merc thing. ;D ;D
|
Re: V20 stopped now Jet Ski repairs from WRECK
Franco I love that idea i bet these stand up hulls would work too. they are full of foam and can't sink then see this one and she floated home kinda lol
|
Re: V20 stopped now Jet Ski repairs from WRECK
last night i layed a single solid sheet of glass see in pics
http://i8.photobucket.com/albums/a46...MVC-012S-2.jpg http://i8.photobucket.com/albums/a46...MVC-013S-2.jpg http://i8.photobucket.com/albums/a46...MVC-014S-2.jpg http://i8.photobucket.com/albums/a46...MVC-015S-1.jpg http://i8.photobucket.com/albums/a46...MVC-016S-1.jpg http://i8.photobucket.com/albums/a46...i/MVC-017S.jpg http://i8.photobucket.com/albums/a46...MVC-019S-1.jpg http://i8.photobucket.com/albums/a46...MVC-020S-1.jpg here's what i usedon it to make smooth http://i8.photobucket.com/albums/a46...MVC-018S-1.jpg see i have a tub full all different weights http://i8.photobucket.com/albums/a46...i/MVC-021S.jpg have a roll full too http://i8.photobucket.com/albums/a46...MVC-022S-1.jpg here's the Beer / Resin keeper http://i8.photobucket.com/albums/a46...MVC-023S-1.jpg http://i8.photobucket.com/albums/a46...i/MVC-024S.jpg http://i8.photobucket.com/albums/a46...i/MVC-025S.jpg |
Re: V20 stopped now Jet Ski repairs from WRECK
LOL. Great Pics. SKOOL. ;)
|
Re: V20 stopped now Jet Ski repairs from WRECK
Looks like I may have to bring you some good beer when I come out to visit ;D
Mickey's? Man, that will make for some interesting fiberglassing... :P |
Re: V20 stopped now Jet Ski repairs from WRECK
lol oh yeah don't forget the Whiskey on the bottom shelf and the Mixers lol.
|
Re: V20 stopped now Jet Ski repairs from WRECK
here's what caused this damage was jumping like i am here on my 750
http://i8.photobucket.com/albums/a46...i/img_6812.jpg http://i8.photobucket.com/albums/a46...i/img_6683.jpg http://i8.photobucket.com/albums/a46...i/img_6418.jpg http://i8.photobucket.com/albums/a46...i/img_6376.jpg |
Re: V20 stopped now Jet Ski repairs from WRECK
My boss used to work for Sea Doo in the 80's/early 90's. *He was in charge of the development of the propulsion system, this included the inlet, pump, and nozzle. *He has some interesting stories including skis jumping out of test tanks with terrified engineers flying through the air.
|
Re: V20 stopped now Jet Ski repairs from WRECK
Quick add me to your will!! At least to all the books on wireing! ;)
|
Re: V20 stopped now Jet Ski repairs from WRECK
i'll think about ya lol
well the bottom was a easy fix butthe top i thought was fine till i sanded the paint off to find this wow how ya like all the cracks, cuts, and holes, well i cut the large hole where the old gas neck was i'm going to customize the whole front now ;D http://i8.photobucket.com/albums/a46...MVC-026S-1.jpg http://i8.photobucket.com/albums/a46...i/MVC-027S.jpg http://i8.photobucket.com/albums/a46...i/MVC-028S.jpg http://i8.photobucket.com/albums/a46...MVC-029S-1.jpg http://i8.photobucket.com/albums/a46...MVC-031S-1.jpg http://i8.photobucket.com/albums/a46...MVC-032S-1.jpg http://i8.photobucket.com/albums/a46...MVC-033S-1.jpg http://i8.photobucket.com/albums/a46...i/MVC-030S.jpg |
Re: V20 stopped now Jet Ski repairs from WRECK
well tonight i did some nose glass work and ohbythe way what large hole are you talking about lol
http://i8.photobucket.com/albums/a46...MVC-001S-3.jpg http://i8.photobucket.com/albums/a46...MVC-002S-2.jpg http://i8.photobucket.com/albums/a46...MVC-003S-1.jpg http://i8.photobucket.com/albums/a46...MVC-004S-3.jpg |
Re: V20 stopped now Jet Ski repairs from WRECK
Hey, what kind of pump are you running to make 78 mph? I've never heard of anybody breaking 65 mph on a 440 pump. The stock ones just can't move enough water. I don't even know if a 750 pump can push a ski much past 65.
|
Re: V20 stopped now Jet Ski repairs from WRECK
PJS race pump 440 style shaft so i can run aluminum shaft. it can be done you just have to spend the money if you are going to race you better have the best. it's been along time since my old girl was raced but she is still full race modified. they made a supercharger for the old piston port 440 / 550 motors. it was built by Parks Performance in Ohio.no you won't out of a 750 pump to big of an outlet. the 440 pump when bored was the best cause it had the smaller outlet to get more speed. use a JetSplyn output cone on a bored 440 pump and twin roller bearing set up you can acheive much more speed than with a 550 or a 750 pump. Parks had a 550 that ran in the upper 70's on fresh water. it takes a ton of motor to run those speeds and RPM's you need all parts lightened like the aluminum flywheel drive shaft and lighted welded crank. you will need a vari prop from 15 to 17 pitch. when you bore a 550 out to a 575 and then twin 44mm carbs, MSD Ign. and a supercharger you can get those speeds.
|
Re: V20 stopped now Jet Ski repairs from WRECK
SKOOl, has his game plan down. ;)
|
Re: V20 stopped now Jet Ski repairs from WRECK
here she is with micro ballons all over the nose.
http://i8.photobucket.com/albums/a46...MVC-009S-3.jpg http://i8.photobucket.com/albums/a46...MVC-010S-2.jpg http://i8.photobucket.com/albums/a46...MVC-011S-3.jpg http://i8.photobucket.com/albums/a46...MVC-013S-3.jpg http://i8.photobucket.com/albums/a46...MVC-012S-3.jpg |
Re: V20 stopped now Jet Ski repairs from WRECK
after sanding and she's ready for primer then paint on the top side of the nose.
http://i8.photobucket.com/albums/a46...MVC-025S-1.jpg http://i8.photobucket.com/albums/a46...MVC-026S-2.jpg http://i8.photobucket.com/albums/a46...MVC-027S-1.jpg http://i8.photobucket.com/albums/a46...MVC-028S-1.jpg http://i8.photobucket.com/albums/a46...MVC-029S-2.jpg http://i8.photobucket.com/albums/a46...MVC-030S-1.jpg http://i8.photobucket.com/albums/a46...MVC-034S-1.jpg http://i8.photobucket.com/albums/a46...i/MVC-035S.jpg |
Re: V20 stopped now Jet Ski repairs from WRECK
ok primed top side
http://i8.photobucket.com/albums/a46...MVC-005S-3.jpg http://i8.photobucket.com/albums/a46...MVC-006S-3.jpg http://i8.photobucket.com/albums/a46...MVC-007S-3.jpg ok then flipped over and line sanded bottom and them primed as well. http://i8.photobucket.com/albums/a46...MVC-009S-4.jpg http://i8.photobucket.com/albums/a46...MVC-010S-3.jpg http://i8.photobucket.com/albums/a46...MVC-011S-4.jpg http://i8.photobucket.com/albums/a46...MVC-012S-4.jpg http://i8.photobucket.com/albums/a46...MVC-013S-4.jpg http://i8.photobucket.com/albums/a46...MVC-014S-3.jpg http://i8.photobucket.com/albums/a46...MVC-015S-2.jpg http://i8.photobucket.com/albums/a46...MVC-016S-2.jpg http://i8.photobucket.com/albums/a46...MVC-017S-1.jpg so what ya think ??? |
Re: V20 stopped now Jet Ski repairs from WRECK
Will somebody here PLEASE remind SKOOL that he has a unfinished V20 project. >:( :P ::) ;D
|
Re: V20 stopped now Jet Ski repairs from WRECK
Quote:
|
Re: V20 stopped now Jet Ski repairs from WRECK
Quote:
Now that is an interesting thought, take two jet skis, cut them off and mount them like brackets on the back end? Tie them together like dual engines for steering. I wonder if they would push a V ok, how fast would it go and what kind of gas milage you would get? |
| All times are GMT -5. The time now is 09:40 AM. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.