New Project
 

Well, it looks like the rain will never stop, so I took on another project today. I would post pix., but photobucket is Down. >:( >:( >:(

Re: New Project
 

Try now :D
http://i175.photobucket.com/albums/w...3/BAYLINER.jpg

Re: New Project
 

Thanks T. *;)

Well, as I said, with all this rain, I decided to work on something else. Yanked out the fuel hatch cover and started tearing out the soaked 30 year old wood.

http://i47.photobucket.com/albums/f1...r/DSC03056.jpg

The wood just fell out, making things really easy.

http://i47.photobucket.com/albums/f1...r/DSC03057.jpg

Almost cleaned up.

http://i47.photobucket.com/albums/f1...r/DSC03058.jpg

Ok, here is where some of you might bust on me. I had wood left over from the transom, so instead of one solid piece, I added in pieces. Figured if all those small pieces last 30 years, 5 pieces will last just as long. PLUS, I didnt want to spend more $$ on a sheet and get stuck with more leftover wood. Still believe the strenght is in the cloth and resin, not the wood. Guess we shall see soon enough. ;)

http://i47.photobucket.com/albums/f1...r/DSC03059.jpg

Re: New Project
 

Me thinks you'll be just fine Hammer. Maybe an extra layer of glass just in case, but it'll do. It's a shame that you'll never be able to afford to sell this boat ;D

Re: New Project
 

Can't help myself. If your replacing wood, why are you putting wood back?
I know the industry hasen't provided us with an economical alternative but it just drives me crazy to fix an old problem with a new problem.
Keep us posted hammer, that is the only appropriate measure.
AND IT LOOKS GOOD.

Re: New Project
 

Thanks guys. ;)
Still need to sand the wood and ruff her up a bit. Hoping to resin on Saturday. Using car batteries for weight while she sets up. 8)

Re: New Project
 

Now thats what I am talking about!! You are selling it!! It will last as long as you needed for the sale!

I am sure for many years! But this is what you have too do to keep the cost down!!

Well you will have a new career after you retire from the donut tasting force!! ;)

NOw I know why skools is leaving the site, he scared you going to show him up! LOL ;D

Re: New Project
 

LOL. ;D ;D ;D ;D ;D ;D

Re: New Project
 

looks good hammer whens the bidding begin ;D ;D

Re: New Project
 

Gotta paint, fill more holes, get a bow rail. Looks like that Johnson 225 is going on as well. ;D
That means steering cable, helm, battery, bilge. Wont it ever stop. :-[ ;D

Re: New Project
 

That's the way you do it.
Don't think it'll be easier and look better without the bowrail? More hole filling yes, but ???

Re: New Project
 

Gotta have a bow rail. Need some chrome hanging off the front. ;D

Re: New Project
 

While your at it, see if Stink can supply the coon tail.
Oh ctt I'm sure can supply the fuzzy dice! ;D

Re: New Project
 

LOL. Won this on E-Bay for only 99 cents. ;D
Super thick and strong, but will suck up alot of West System. :o
2ft short though, gotta pull out my scraps. Get done work in 55 minutes, then its back to work on the hatch cover. 8)

http://i47.photobucket.com/albums/f1...r/DSC03060.jpg

Re: New Project
 

Well, I hit the wood with a grinder to get a good bond and went to town with th eWest System this morning. Have just about anything heavy I could find with weight to stack on top of the hatch cover.
Cure time is 8 hours. Wondering if I should let it set longer or not ???
Know a few guys had problems with bonding.

http://i47.photobucket.com/albums/f1...r/DSC03061.jpg

Re: New Project
 

i like that you are still charging the battery while using it for weight, call it "shop multitasking"

Re: New Project
 

let sit over night thats more the 8 hours!!

The guys with the bonding problem did not use enough epoxy from what I remeber

Re: New Project
 

A few pics. for the Monday morning pix. Ho's here. *;D

http://i47.photobucket.com/albums/f1...r/DSC03062.jpg

Well. I added three layers of glass along the outside corners and two layers on top. As you can see, I had an extra piece of wood and decided to double her up.
She turned out "Super Strong" !!. ;)

http://i47.photobucket.com/albums/f1...r/DSC03063.jpg

Cleaned it up with a quick coat of primer.

http://i47.photobucket.com/albums/f1...r/DSC03064.jpg

Didnt do to much fine tuning, quick sand job and some left over primer.

Quick primer job on the topside as well. Didnt cut the hole out. Might wait, in case I decide to relocate the tanks. The tank location on these early years really suck. Dont understand why you have access to only half the tank, while the other half is under the deck that cause's a soft stop due no support. >:(
http://i47.photobucket.com/albums/f1...r/DSC03065.jpg

Re: New Project
 

Looks good, what no access hole no more? ;D

Re: New Project
 

Might move the tank forward, causing me to move the access hole. But that involves cutting out the ....bulk head..I think you call it and moving it forward and reglassing it in.
Need to inpect the tank and then decide. The foam is soaked, so i might be doing that today.
It gets me out of wet sanding the hull. That jobs sucks. :(

Re: New Project
 

Glass over it, if you need to access the area, chances are you got to remove the hatch anyway.

Re: New Project
 

I agree. ;D

Re: New Project
 

I hope it fits. ??? ???

Re: New Project
 

Looks good!!

Did you ck before adding the extra wood for clearance??

I would not move tank forward!! Cuddy are bow heavy as it it, adding more weight to the front will make it slam more then it already does!!

CC are a different story! Less weight up front and the driver is positioned further back to keep bow light.

Pull tank get rid of all the wet foam and reinstall in the same place. ;)

Re: New Project
 

Oh...didnt know that. Heard some past talk about tank locations. Well I guess it will stay where it is. Thanks. *;)

Didnt measure, I eyed it up. Wondering about my clearance for the fuel intaje. :-X :-/ :o :o :o

Re: New Project
 

Nice job...good luck on the clearance! That's crucial :-/

Re: New Project
 

As for replacing with wood, it will give someone else a project to do in twenty years. Good job! Billy Mac ;D

Re: New Project
 

Ahhhhh!!!!, I took more pics. today and I have since misplaced the camera. In the house, on the boat...where teh hell is it !!!

Re: New Project
 

Look under Willy's sweat shirt! billy Mac ;D

Re: New Project
 

Ahhh....LOL !!!! Didnt see that coming !! ;D

Re: New Project
 

Found my camera. *;D
The hatch fits, even with teh extra sheet of wood. ;D

http://i47.photobucket.com/albums/f1...r/DSC03066.jpg

What a waiste of space. >:( Gonna be yanking out old foam in the days to comes.

http://i47.photobucket.com/albums/f1...r/DSC03067.jpg

Re: New Project
 

Lookin' good there Hammer! Sell me that evinrude kicker and you'll have some more money for your project! 8)

Re: New Project
 

Kicker motor ??? ???

Re: New Project
 

It's in the background of your pics.