Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Performance (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=15)
-   -   My trailer axle broke in two this afternoon!!! (https://forums.wmpdevserver1.com/community/showthread.php?t=7386)

dirkpitt 10-29-2006 08:39 PM

My trailer axle broke in two this afternoon!!!
 
Man, if it was not for bad luck I would have no luck. I was heading down to the river today to run the V20, and halfway there the axle broke. Thank sweet Jesus that the boat did not leave the trailer. Whew! Well I got the boat home, and now I am in need of an axle, spindles, leaf springs, and mounting hardware. Anyone know where I can get a 3500lb. square axle for a good price???

Skools Out 10-29-2006 09:47 PM

Re: My trailer axle broke in two this afternoon!!!
 
Redneck Trailer Supplies

http://www.redneck-trailer.com/locations.htm

macojoe 10-30-2006 12:55 AM

Re: My trailer axle broke in two this afternoon!!!
 
http://www.championtrailers.com/

Pipe_Dream 10-30-2006 11:09 AM

Re: My trailer axle broke in two this afternoon!!!
 
http://i81.photobucket.com/albums/j2.../Misc/pics.png

reelapeelin 10-30-2006 11:32 AM

Re: My trailer axle broke in two this afternoon!!!
 
Quote:

Originally Posted by Pipe_Dream



Dunno Pipe...kinda glad no pics...sounds UGLY :P ...hope ya get 'er back on the road soon, Dirk...and w/ out too much damage to wallet ;) :D ...

macojoe 10-30-2006 12:03 PM

Re: My trailer axle broke in two this afternoon!!!
 
Quote:

nd w/ out too much damage to wallet
who you kiding!! its always money!! I can hear the register ring now!!

$10 a ring!!

Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding Ding

That should do it!!

dirkpitt 10-30-2006 03:16 PM

Re: My trailer axle broke in two this afternoon!!!
 
I have been looking at axles, I just need the leaf springs, mounting hardware and the axle. The wheels, bearings, and spindles are fine.

macojoe 10-30-2006 08:21 PM

Re: My trailer axle broke in two this afternoon!!!
 
Quote:

I have been looking at axles, I just need the leaf springs, mounting hardware and the axle. The wheels, bearings, and spindles are fine.
Get the Axles with spindles!! Or your going to have to find someone that can weld them in and get them stright!!!

And why not get all new bearings!! after you hammer the races out the old they will be junk for the new!
ou going to have to take them out any way as when he welds the spindles to the new axle they will heat up !

Trailer is not the place to skimp!!

msbhammer 10-30-2006 09:34 PM

Re: My trailer axle broke in two this afternoon!!!
 
Lets see some Pics. ;D

lumberslinger178 10-31-2006 12:53 AM

Re: My trailer axle broke in two this afternoon!!!
 
just go buy a new one and sell the old one to the junk yard ;D

TheTinMan 10-31-2006 01:59 AM

Re: My trailer axle broke in two this afternoon!!!
 
Get a torsion axle if it will work on your trailer....definately worth the extra $$$.

reelapeelin 10-31-2006 10:04 AM

Re: My trailer axle broke in two this afternoon!!!
 
Yeah, while you got it down, DEFINATELY put new bearings/ races in... ;) :D ...

Stillrunning 01-15-2007 07:38 PM

Re: My trailer axle broke in two this afternoon!!!
 
Before replacing any new parts check the rest of the trailer for rust to the main structure. I replaced all you have to replace and all rollers to find that the main frame in the rear was in just as bad of shape and not worth fixing. I did make a nice utility trailor after cutting off all the rollers and the rear. Go ahead as others have said and buy a complete axle as its not that much more.

reelapeelin 01-17-2007 11:50 AM

Re: My trailer axle broke in two this afternoon!!!
 
Quote:

Originally Posted by Stillrunning
Before replacing any new parts check the rest of the trailer for rust to the main structure. I replaced all you have to replace and all rollers to find that the main frame in the rear was in just as bad of shape and not worth fixing. I did make a nice utility trailor after cutting off all the rollers and the rear. Go ahead as others have said and buy a complete axle as its not that much more.



You make a good point, Stillrunning... ;) ...


All times are GMT -5. The time now is 02:52 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.