Anyone ever fill in a notched transom?
 

As I'm in the midst of prepping my boat for paint, I'm wondering " Why couldn't you fiberglass a bulkhead on the inside of the splashwell on a notched transom V-20?" It wouldn't give you a full transom but it would offer more protection on the stern and knock down some of the motor noise and give a sweet place for more rod holders. Any thoughts?

Thanks,
Scott

Re: Anyone ever fill in a notched transom?
 

I'm sure it has been/can be done, but by somebody REALLY KNOWS what he's doin'...not me... :P...

Re: Anyone ever fill in a notched transom?
 

I gotta tell ya, If you can figure out how to do it, do it. Us i/o guys and guys like MJ with brackets are really lucky. Last wednesday a couple of guys were out on the Indian River and were towing a sailboat for a friend. Some severe weather blew up quickly. The sailboat got stuck some how and these guys were trying to pull it free. They had a following sea behind them, a wave came over the transom and swamped the boat. Luckily they grabbed some pfd's prior to going in the drink. The rescue helicopter had a difficult time doing the rescue, but they survived. I know they weren't the sharpest knife in the drawer. If they would have cut loose from the sail boat and and swung around to a quatering sea they would not have lost thier boat. In the last few weeks though, 3 guys were returning from a fishing trip in a 20 footer, a wave came over the transom and sunk the boat, 2 died and one survived. In Virginia, a friend of mine that I grew up with was fishing the barrier islands on the eastern shore of the chesapeake bay, somehow they got swamped and 2 guys died there. I believe some basic seamanship and using good judgement would have helped alot. But a full transom is less likely to be swamped from behind. IMO I would never, ever consider a boat with a notched transom or one of those ugly euro transoms. When it comes time to repower mine, I'm gonna pick MJ's brain and hang a bracket with an outboard. Just my opinion. I don't want to hear any bad news about my friends on this forum

Re: Anyone ever fill in a notched transom?
 

I have taken a wave over the transom once!! In my V20!! It was a bigen! :o

High tailed it out there just before the 2nd wave came!!

I am sure that if I had a notched transom the first wave would have sunk me! The full transom blocked just anough water!

Never will I have a notched transom again!! When time to buy something else I will convert or buy a converted!

Re: Anyone ever fill in a notched transom?
 

Scott,
Interesting question - as I am currently restoring a V20 and very seriously considering closing in the transom and hanging a bracket. The boat is currently gutted, windshield removed, being prepped for paint. Will need to decide shortly which way I go. A full bracket will add 1500-2000k to my restoration budget. I'll be sure and take some pics to share if I "fill-in" the transom notch. I like to visit "the Race" for fishing - a strong current, standing wave rip in Long Island Sound. 6' standing waves there are not uncommon ... and a full transom would give alot of peace of mind.
Brian

Re: Anyone ever fill in a notched transom?
 

For those of us who have notched transoms, there's a solution in the Gallery...although NOTHING is gonna stop that rouge wave as MJ atests, Emmit Fitzpatrick's splashwell front "wall" is a great idea for stopping most of the water from over the notch intrusion before it gets into the boat...

If I were gonna do this(and I've thought about it), it would be of Starboard instead of wood...I like the bracing Fitz used to the transom...

Anyway... ;) :)...

Re: Anyone ever fill in a notched transom?
 

This is an interesting thread. I like the full transom because it keeps water out of the boat and your feet dry.

But, A notched transom sheds water better if you take a wave over the stern. That big cut out close to the waterline lets the water OUT of the boat as well as in.

If you have a closed transom and scuppers, water can only get out as fast as the scuppers let it. If your scuppers drain to the bilge, then water gets out only as fast as your pump.

I dont think that a notch transom is any more or less likely to sink than a full transom.

Re: Anyone ever fill in a notched transom?
 

That why I have two bilge pumps - one is 750 gph and the other is 1000 gph - I could almost pressure wash your house when both are fired up and running. Plus I bet I get a lot less water over my transom than a notched transom. Wave tend to push up on the hull instead of going over the notch

Re: Anyone ever fill in a notched transom?
 

The v21's have that "wall" that Emmit built into his v20. based on posts above it looks like a good option if you don't have a bracket/IO. Keeps some water out and can be removed to let water back out of it's already in. Pix off of v-21 are below:

http://i4.photobucket.com/albums/y14...r/PDR_0907.jpg

http://i4.photobucket.com/albums/y14...r/PDR_0900.jpg

Re: Anyone ever fill in a notched transom?
 

thats the first viable alternative i have seen,

Re: Anyone ever fill in a notched transom?
 

I have found out that a 105 qt gott cooler will fit perfectly in the transom notch and rest on the splashwell. This gives you the protection of the closed cockpit and gets the cooler off the deck. We would do this when the seas allowed . It's amazing how much quieter the outboard is with that as a deflector when you are running.

Re: Anyone ever fill in a notched transom?
 

Call me crazy or stupid but my favorite seat while I'm fishing is to sit on my outboard with my feet propped up on the transom area, very comfy.

Re: Anyone ever fill in a notched transom?
 

Ok, Shicks I think you were referring to filling in the entire notch. Has anybody ever filled in the notch on a 20" to bring it up to 25" for a 25" motor? That's what I want to know cause I just might look into doing that.

Re: Anyone ever fill in a notched transom?
 

That's what I thought he meant, too... :D...

Re: Anyone ever fill in a notched transom?
 

Check this out from Classic Mako
http://www.classicmako.com/projects/carpenter/

Re: Anyone ever fill in a notched transom?
 

Sorry for the confusion guys. I was talking about the line the forward end of the splash well. I did a half a$$ job with paint but maybe you can see what I'm talking about. It's about the same thing Fitz did with wood, but I was thinking of a permanent job with fiberglass.


http://img.photobucket.com/albums/v7...ansomnotch.jpg

Re: Anyone ever fill in a notched transom?
 

No offense, but it would look like one of those damn euro-transoms. But it would keep out the water

Re: Anyone ever fill in a notched transom?
 

Wouldn't look Euro...no angles in back...same straight transom...

Anyway, LOOK at Fugazi's Gallery...last few shots of makeover and transom re-make...that looks like a 30" shaft... :o...

Re: Anyone ever fill in a notched transom?
 

It could be done!! But being permint it would be hard to get to the motor when you wanted to??

Like when a line got caught on the prop, or if you needed to look at something on the motor??

Better if you made a removeable panel, like two pieces of starboard each side with a drop in panel.

will leak some but most would go right back out.

Re: Anyone ever fill in a notched transom?
 

Make it out of starboard with a removeable notch...not much different than the V21...
like this...
http://www.wellcraftv20.com/gallery/...otch.sized.jpg

Re: Anyone ever fill in a notched transom?
 

I've been pondering something like this for a while, with the idea of a wood or starboard panel that would slide in and out easily. Primary reason being engine noise, not that I don't love the sound of my Yammi ;D but sometimes when out pleasure cruising it would be nice to not have to talk over the motor. When fishing or at the dock whatever I could remove it and stow it in the cuddy. It's food for thought . . .
If I do it I'll post pics. ;)

Re: Anyone ever fill in a notched transom?
 

I see that you have the door already for a MJ & CB tackle box already!! ;D

Re: Anyone ever fill in a notched transom?
 

How do you guys get in & out of your boat?

Here on the Gulf Coast, the family & I do a bunch of island hopping & unless it's about 100 degrees my wife doesn't like getting her feet wet. That's one of the great things about the V20 I run to a beach with a fair dropoff, throw the bow anchor, pull it around & swing the stern nearshore. I have a dive bracket on the starboard side, and the previous owner (a diver) put a box that works like a step in the well. step, step, step & ther you are on shore, with dry feet.

That full transom you are describing would make that pretty difficult.

One other thing to remember is that a cut transom will only hold back half as much water if it does get in.

I've been nearly stern swamped in a few boats, most notibly a Boston Whaler, My V20 has seen 7 foot seas & as long as I'm making way the stern has stayed high & dry.

I understand the safety/security issue but for me it would remove one of the great benefits of this boat. If you stayed on the boat all day I guess I'd be all for it.

Doug

Re: Anyone ever fill in a notched transom?
 

Well lets see pictures!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Re: Anyone ever fill in a notched transom?
 

MJ,
That's a compartment I found last year at a place called Budget Boats. It's kind of like a boat junk yard. I was on a quest to find a decent glove box to keep my wallet, keys and other stuff. This is what I found, it's got two drawers in it with thumb latches, used.......$100, very pricey. If I ever stop working these 12 hour days I'll snag some pics.

Also, I get my boat at the boat ramp and stay in it all day.

Re: Anyone ever fill in a notched transom?
 

That's true garbubba. I spend almost every Sunday (with nice weather) out on the lake with my wife and kids. On those hot days they are all about getting in and out of the boat going swimming, island hopping etc. Shicks and Pipe, if we decide to do something like this, maybe we should put a hinged transom door to the side with the swim step. What do ya'll think? ???

Re: Anyone ever fill in a notched transom?
 

show me pic of the step!! I want to see :'( I have starboard left!! ::)