Transom Mod update
 

Went to visit the V-20 today to check on the progress so far. I brought the camera for all of you picture hounds. So far the deck has been installed and glassed in. He used a 2X4 frame screwed and glued to the stringers to support the deck (a little overkill I thought but it gonna move at all). The 2X4's are epoxied to the transom also. An 8X12 hatch will be installed for bilge access. I opted to make a removable bait station in the center section which explains the cut out area in the center. That is another project in the works. An access hatch will be put into front facade for access to the transom and mechanical areas.ENJOY :) :)
http://i162.photobucket.com/albums/t...t2207006-1.jpg
http://i162.photobucket.com/albums/t...t2207005-1.jpg
http://i162.photobucket.com/albums/t...t2207004-1.jpg
http://i162.photobucket.com/albums/t...t2207003-1.jpg
http://i162.photobucket.com/albums/t...aft2207008.jpg
http://i162.photobucket.com/albums/t...aft2207012.jpg

Transom Mod update
 

Went to visit the V-20 today to check on the progress so far. I brought the camera for all of you picture hounds. So far the deck has been installed and glassed in. He used a 2X4 frame screwed and glued to the stringers to support the deck (a little overkill I thought but it gonna move at all). The 2X4's are epoxied to the transom also. An 8X12 hatch will be installed for bilge access. I opted to make a removable bait station in the center section which explains the cut out area in the center. That is another project in the works. An access hatch will be put into front facade for access to the transom and mechanical areas.ENJOY :) :)
http://i162.photobucket.com/albums/t...t2207006-1.jpg
http://i162.photobucket.com/albums/t...t2207005-1.jpg
http://i162.photobucket.com/albums/t...t2207004-1.jpg
http://i162.photobucket.com/albums/t...t2207003-1.jpg
http://i162.photobucket.com/albums/t...aft2207008.jpg
http://i162.photobucket.com/albums/t...aft2207012.jpg

Re: Transom Mod update
 

Lookin good. You'll be feeshin in no time.

Re: Transom Mod update
 

Lookin good. You'll be feeshin in no time.

Re: Transom Mod update
 

Lookin very nice!! 8)

Re: Transom Mod update
 

Lookin very nice!! 8)

Re: Transom Mod update
 

Thats some great work. ;D

Re: Transom Mod update
 

Thats some great work. ;D

Re: Transom Mod update
 

looks good fella.youll get her right soon. Hey, spring is just around the corner. Ive had my boat almost a year and havent put it in the water yet! man in bout to go crazy! We had some warm pretty days last week, but I had a little more to do to it. I think im about ready now. As far as I know my boat hasnt been wet in about six years.It is time!!!!!!!

Re: Transom Mod update
 

looks good fella.youll get her right soon. Hey, spring is just around the corner. Ive had my boat almost a year and havent put it in the water yet! man in bout to go crazy! We had some warm pretty days last week, but I had a little more to do to it. I think im about ready now. As far as I know my boat hasnt been wet in about six years.It is time!!!!!!!

Re: Transom Mod update
 

Cfelton, did you ever post pics of your V. ??? ???
Cant remember. :( ;)

Re: Transom Mod update
 

Cfelton, did you ever post pics of your V. ??? ???
Cant remember. :( ;)

Re: Transom Mod update
 

nope,not yet!iv gotta get you all some. iv been pittling on it ,tying up some loose ends. i put all my teak trim back in last weekend . ive finished up the trailer too.i made some gunwale step pads out of some old mahogny that came off my old boat. I had a 1958 Colonial with twin chrysler 225sixes.it was given to me,but i had to move it . I carried it about 30 miles with a 15 hp motor ,close to home where a bad storm sank it . ilater brought it back up and scraped it. it had mahogany interior and a pecan hull. iv used a lot of wood off of it .... i recovered the panels that covered the saddle tanks,dont look too bad for a jack leg. Ill get some pics this week. i guess i need to ask MJ for a gallery,and i might need a little help posting the pics.

Re: Transom Mod update
 

nope,not yet!iv gotta get you all some. iv been pittling on it ,tying up some loose ends. i put all my teak trim back in last weekend . ive finished up the trailer too.i made some gunwale step pads out of some old mahogny that came off my old boat. I had a 1958 Colonial with twin chrysler 225sixes.it was given to me,but i had to move it . I carried it about 30 miles with a 15 hp motor ,close to home where a bad storm sank it . ilater brought it back up and scraped it. it had mahogany interior and a pecan hull. iv used a lot of wood off of it .... i recovered the panels that covered the saddle tanks,dont look too bad for a jack leg. Ill get some pics this week. i guess i need to ask MJ for a gallery,and i might need a little help posting the pics.

Re: Transom Mod update
 

Looking forward to seeing your V. Any problems with loading pics, just email me te pics and I'll post them for ya. ;)

Re: Transom Mod update
 

Looking forward to seeing your V. Any problems with loading pics, just email me te pics and I'll post them for ya. ;)

Re: Transom Mod update
 

thanks hammer,ill try em if i have trouble ill let you know ill try to take some this afternoon.im working the graveyard shift this week.iusually sleep till about two or three

Re: Transom Mod update
 

thanks hammer,ill try em if i have trouble ill let you know ill try to take some this afternoon.im working the graveyard shift this week.iusually sleep till about two or three

Re: Transom Mod update
 

;) ;) ;)

Re: Transom Mod update
 

;) ;) ;)