|
More Work done Today
Well decided to install my LED lights. Just wasnt sure how I was gonna do it. Run the wire inside the cuddy or all the way around to the other side to the fuse box. Well, I decide to do it the hard way and cut the calk and unsrewed those damm fish rod holders that I hate. "Need tank rack" *;D
Well, just my luck, I run out to West Marine, grab 35 ft. of wire, screws and washers, ect, come home, get all set up, and what do I find !!, wire !!, I already had a bunch of left over wire from when I tore out the old wiring. *>:( >:( >:( What a waiste of cash !!, but "ll keep it for a future stearo for the wifey. Might actually go ahead and run the wire now so I dont haldf to pull the rod holders out again. Wiring I found. *>:( http://i47.photobucket.com/albums/f1...r/DSC02539.jpg Running the wire. http://i47.photobucket.com/albums/f1...r/DSC02538.jpg Trying my best with that crappy ceiling carpet. Finally cut it and sprayed some 3m Spray to glue it back together. Wish I didnt have the carpet. Looks more manly with wires hanging down from inside teh cuddy. ;D http://i47.photobucket.com/albums/f1...r/DSC02540.jpg Ok, one side is done. http://i47.photobucket.com/albums/f1...r/DSC02541.jpg Messing with that dam pimp daddy ceiling carpet. >:( http://i47.photobucket.com/albums/f1...r/DSC02544.jpg Wiring to the fuse panel. http://i47.photobucket.com/albums/f1...r/DSC02545.jpg Damm, they work *:o http://i47.photobucket.com/albums/f1...r/DSC02542.jpg http://i47.photobucket.com/albums/f1...r/DSC02543.jpg |
More Work done Today
Well decided to install my LED lights. Just wasnt sure how I was gonna do it. Run the wire inside the cuddy or all the way around to the other side to the fuse box. Well, I decide to do it the hard way and cut the calk and unsrewed those damm fish rod holders that I hate. "Need tank rack" *;D
Well, just my luck, I run out to West Marine, grab 35 ft. of wire, screws and washers, ect, come home, get all set up, and what do I find !!, wire !!, I already had a bunch of left over wire from when I tore out the old wiring. *>:( >:( >:( What a waiste of cash !!, but "ll keep it for a future stearo for the wifey. Might actually go ahead and run the wire now so I dont haldf to pull the rod holders out again. Wiring I found. *>:( http://i47.photobucket.com/albums/f1...r/DSC02539.jpg Running the wire. http://i47.photobucket.com/albums/f1...r/DSC02538.jpg Trying my best with that crappy ceiling carpet. Finally cut it and sprayed some 3m Spray to glue it back together. Wish I didnt have the carpet. Looks more manly with wires hanging down from inside teh cuddy. ;D http://i47.photobucket.com/albums/f1...r/DSC02540.jpg Ok, one side is done. http://i47.photobucket.com/albums/f1...r/DSC02541.jpg Messing with that dam pimp daddy ceiling carpet. >:( http://i47.photobucket.com/albums/f1...r/DSC02544.jpg Wiring to the fuse panel. http://i47.photobucket.com/albums/f1...r/DSC02545.jpg Damm, they work *:o http://i47.photobucket.com/albums/f1...r/DSC02542.jpg http://i47.photobucket.com/albums/f1...r/DSC02543.jpg |
Re: More Work done Today
Ok MJ, waiting on you and your lights. ;D
|
Re: More Work done Today
Ok MJ, waiting on you and your lights. ;D
|
Re: More Work done Today
good job hammy.
|
Re: More Work done Today
good job hammy.
|
Re: More Work done Today
Why thank you Charlie. Thats mighty "CUTE" of you to say that. LOL !!! ;D ;D ;D ;D ;D ;D
|
Re: More Work done Today
Why thank you Charlie. Thats mighty "CUTE" of you to say that. LOL !!! ;D ;D ;D ;D ;D ;D
|
Re: More Work done Today
Pretty work Hammer. What size wire did you use? I like the pretty blue tags ;D.
|
Re: More Work done Today
Pretty work Hammer. What size wire did you use? I like the pretty blue tags ;D.
|
Re: More Work done Today
Nice job Hammer, I've been scanning the site for other pics, but haven't found what I'm looking for? ;D
|
Re: More Work done Today
Nice job Hammer, I've been scanning the site for other pics, but haven't found what I'm looking for? ;D
|
Re: More Work done Today
psssst guys. . . . dont tell hambone but i heard that guys who use blue tags are gay.
|
Re: More Work done Today
psssst guys. . . . dont tell hambone but i heard that guys who use blue tags are gay.
|
Re: More Work done Today
Used #18-2 wire. Shoe string budget on tagging the wiring, but it helps. *;D Airslot, check your email.
So far done: 1. Sand and stain the wood on the V. 2. Patch dash, not the best, but alot better then what it was. 3. Sand and patch, then repaint bow. 4. Replace tilit trim and rams. 5. New LED lights. 6. New battery cables. Need to finish: 1. Install pulpit/anchor roller chain/rope hatch cover. 2. sand and repaint lower unit. 3. touch up hull. 4. Install keel trailer guard thing a-bob. 5. Install MJ's or Chum's bracket *;D 6. Wash the boat big time. 7. Ask wifey for gas money since I'm broke. :o |
Re: More Work done Today
Used #18-2 wire. Shoe string budget on tagging the wiring, but it helps. *;D Airslot, check your email.
So far done: 1. Sand and stain the wood on the V. 2. Patch dash, not the best, but alot better then what it was. 3. Sand and patch, then repaint bow. 4. Replace tilit trim and rams. 5. New LED lights. 6. New battery cables. Need to finish: 1. Install pulpit/anchor roller chain/rope hatch cover. 2. sand and repaint lower unit. 3. touch up hull. 4. Install keel trailer guard thing a-bob. 5. Install MJ's or Chum's bracket *;D 6. Wash the boat big time. 7. Ask wifey for gas money since I'm broke. :o |
Re: More Work done Today
Looks good Hammer. I think maybe I should look for a pulpit. I got my coaming cushions today UPS, they are definitely going to be the nicest thing on my boat.
|
Re: More Work done Today
Looks good Hammer. I think maybe I should look for a pulpit. I got my coaming cushions today UPS, they are definitely going to be the nicest thing on my boat.
|
Re: More Work done Today
Hey Mulv, you didnt grab Airslot and mine anchor rollers did ya from the UPS guy. *>:( * ;D
Those coaming pads are sweet. I have some "Gay" blue and white trim piece on either side of mine, but dont like them to much. I want YOURS !! ;D Charlie, thanks for lending me your role of blue Tape. * *:-* * *:P * ;D Hey Mulv, so how do you mount them ??, they have backing screws in them ? Didnt you get some sweet deal on the price ??, how long are they ? |
Re: More Work done Today
Hey Mulv, you didnt grab Airslot and mine anchor rollers did ya from the UPS guy. *>:( * ;D
Those coaming pads are sweet. I have some "Gay" blue and white trim piece on either side of mine, but dont like them to much. I want YOURS !! ;D Charlie, thanks for lending me your role of blue Tape. * *:-* * *:P * ;D Hey Mulv, so how do you mount them ??, they have backing screws in them ? Didnt you get some sweet deal on the price ??, how long are they ? |
Re: More Work done Today
Looks good man, I like those lights! 8)
"Hammie"...........thats so cute. ;D |
Re: More Work done Today
Looks good man, I like those lights! 8)
"Hammie"...........thats so cute. ;D |
Re: More Work done Today
Thanks STINK, the colors match my new thongs. ;D
|
Re: More Work done Today
Thanks STINK, the colors match my new thongs. ;D
|
Re: More Work done Today
I wouldnt steal both, maybe just one so I could watch a thread on how to install the other one ;)
You did a good job with your wiring, mine still looks like a bowl of pasta. |
Re: More Work done Today
I wouldnt steal both, maybe just one so I could watch a thread on how to install the other one ;)
You did a good job with your wiring, mine still looks like a bowl of pasta. |
Re: More Work done Today
Thanks Mulv, its not the best, but its the best I can do with what i have. I hate that dam ceiling carpet. Old, dirty and moldy. Hows the carpet in your V.
|
Re: More Work done Today
Thanks Mulv, its not the best, but its the best I can do with what i have. I hate that dam ceiling carpet. Old, dirty and moldy. Hows the carpet in your V.
|
Re: More Work done Today
Quote:
|
Re: More Work done Today
Quote:
|
Re: More Work done Today
LOL STINKY !!!, Thanks to Chum Wifey is silky smooth.
|
Re: More Work done Today
LOL STINKY !!!, Thanks to Chum Wifey is silky smooth.
|
Re: More Work done Today
That could be taken a couple different ways. ::)
Chum, you da man!!! :D But, either way Im gonna pull a Hammer and say: http://www.forumpictureprocessor.com...s/ttiwwp_1.jpg |
Re: More Work done Today
That could be taken a couple different ways. ::)
Chum, you da man!!! :D But, either way Im gonna pull a Hammer and say: http://www.forumpictureprocessor.com...s/ttiwwp_1.jpg |
Re: More Work done Today
A gift from Chum to help keep things smooth. ;D
http://i47.photobucket.com/albums/f1...r/DSC02546.jpg |
Re: More Work done Today
A gift from Chum to help keep things smooth. ;D
http://i47.photobucket.com/albums/f1...r/DSC02546.jpg |
Re: More Work done Today
HOLY MOLLY!!!!! :o
CHUM I WANT SOME MAN!!!!! :o :o |
Re: More Work done Today
HOLY MOLLY!!!!! :o
CHUM I WANT SOME MAN!!!!! :o :o |
Re: More Work done Today
Chum, Lisa did the razor test for ya to see whats gives the smoother finish. She thanks you. *:P Will send ya pics. of the end results. Sorry STINK. *;D
http://i47.photobucket.com/albums/f1...r/DSC02547.jpg |
Re: More Work done Today
Chum, Lisa did the razor test for ya to see whats gives the smoother finish. She thanks you. *:P Will send ya pics. of the end results. Sorry STINK. *;D
http://i47.photobucket.com/albums/f1...r/DSC02547.jpg |
| All times are GMT -5. The time now is 09:55 PM. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.