Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Modifications (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=13)
-   -   Cabin door? (https://forums.wmpdevserver1.com/community/showthread.php?t=4896)

8barrel 11-23-2006 10:23 PM

Cabin door?
 
I noticed that some V20 have cabin doors. My 73 doesn't have one. Did it originally have one???

Damn, now I want a cabin door!

One more thing added to the wish list. ;D

msbhammer 11-23-2006 10:59 PM

Re: Cabin door?
 
I dont believe that they did have cabin doors. It was all open, even under the dash I thought. Our photo gallery should have pics. ;)

macojoe 11-23-2006 11:13 PM

Re: Cabin door?
 
No door's on the oldies!! I have thought about adding something, but then decided I no need one. I leave my boat on trailer all the time so security is not a problem.

I have seen a few were some one has made one of Sunbrella and snaps, Just to keeps eyes from seeing.

8barrel 11-24-2006 01:05 PM

Re: Cabin door?
 
Under my dash there is some kind of black material going down to floor. Looks factory, but maybe not. I'll post some pics of mine later today after I drag boat out of shed. My interior looks like BlueRunners:

http://www.wellcraftv20.com/gallery/...Boat.sized.jpg

reelapeelin 11-24-2006 01:27 PM

Re: Cabin door?
 
Here's what I did w/ mine...the supports under the dash are 3/4" treated w/ vinyl upholstery...you can barely see that they turn and go into the cabin about 8-9"...this would make door easier, but I like MJ's idea of a Sunbrella or similar snap(or zip?) in...

http://i3.photobucket.com/albums/y90...elin/seats.jpg

macojoe 11-24-2006 03:08 PM

Re: Cabin door?
 
Mine doesn't turn in that way, it would make it easier.

But if someone wants in them doors are not going to stop them!! Neither will the Sunbrella, But what it does do, is keep the stuff covered to keep honest people honest!!

And the door comes right off and gets out of the way rather slamming around.

reelapeelin 11-24-2006 05:16 PM

Re: Cabin door?
 
No doubt if somebody wants in you ain't gonna stop 'em...that's why no doors on mine to begin with...but the ''turn-ins do help hold stuff in place in a chop ;) ...

8barrel 11-24-2006 05:59 PM

Re: Cabin door?
 
Thats a good idea. I like that white vinyl look. I like your dash too. I wanted the door just in case one of the kids wanted to nap while I was fishing. Heres my crappy dash. Getting ready for winter.



http://i124.photobucket.com/albums/p...Picture001.jpg

http://i124.photobucket.com/albums/p...Picture002.jpg

macojoe 11-24-2006 06:19 PM

Re: Cabin door?
 
I have the same dash as you, well did, I did the same as reel 1/4 Starboard makes a great new dash!

reelapeelin 12-04-2006 01:45 PM

Re: Cabin door?
 
...and vinyl over ply is CHEAP, too ;) ...and Lowes has got SS staples now... 8) ...

bradford 01-05-2007 12:08 AM

Re: Cabin door?
 
I have a teak and tinted plexiglass door on my '85 and will probably be taking it off. It 's a p.i.t.a. to clean and oil the teak and I never close it anyway. And besides if someone were to break in they would do more damage than whatever they steal is worth.

macojoe 01-05-2007 12:28 AM

Re: Cabin door?
 
I have taken all the wood out of my boat!! Replaced with Starboard, cleans right up now with no maintains!!

http://syncboard.com/albums/Boat-Tac...60_G.sized.jpg

http://syncboard.com/albums/Boat-Tac...icture_230.jpg


franco477 01-16-2007 10:39 PM

Re: Cabin door?
 
8barrel,

I have a 73 also and have the same material as what you have under the dash. I thought about a door too; but I don't have the hatch front so there was no real point for me to do it. I made a cover out of plywood but haven't been brave enough to try it with starboard yet.


reelapeelin 01-18-2007 10:06 AM

Re: Cabin door?
 
8barrel, lookin' at your pics, that's about same as mine when I got it...I just gutted EVERYTHING and put it all back fresh...keep in mind the panels under the dash SUPPORT the dash...when you remove the panels, have something to prop the dash up and whatever you permanently put back MUST be correct height to keep windshield closeing tight ;) ...

garagenc 01-21-2007 09:18 PM

Re: Cabin door?
 
8barrell
I know where a v-20 is sitting at a marina a buddy of mine owns. It isn't much good but for parts, if youre interested I'll ask if he will sell parts, knowing him he will tell me someone can have it for almost nothing.

Skools Out 01-21-2007 10:34 PM

Re: Cabin door?
 
i have most of the old frame out my 78.

8barrel 01-31-2007 10:17 AM

Re: Cabin door?
 
Thanks for the replies. I think I am going to leave it without the door. I am just going to redo the panels under the dash. I still have to make a seatbox with some storage. Its been cold up here in the Northeast and I have the boat all wrapped up now.

I havnt been around much lately. I am going thru a divorce right now, so i got way too much on my plate now. We are getting along, so its not a nasty one. We are actually doing everything ourselves. No lawyers, they just mess everything up. Its still scary tho. I guess the Judge has the final say on everything.

msbhammer 01-31-2007 10:25 AM

Re: Cabin door?
 
I dont believe in Divorce, but a nice long boat ride with the them. ;D

parishht 01-31-2007 11:09 AM

Re: Cabin door?
 
HAMMER, are you advocating a wreck dive with cement overshoes? ::)

randlemanboater 01-31-2007 11:35 AM

Re: Cabin door?
 
Quote:

Originally Posted by 8barrel
No lawyers, they just mess everything up. Its still scary tho. I guess the Judge has the final say on everything.

8barrel gonna get screwed.

msbhammer 01-31-2007 04:22 PM

Re: Cabin door?
 
Parishhit is reading my mind again. 8)

macojoe 01-31-2007 04:39 PM

Re: Cabin door?
 
Quote:

8barrel gonna get screwed.
Hard and with no lube!!!

franco477 07-03-2007 12:25 PM

Re: Cabin door?
 
8barrel,

My 73 is set up just like yours, except I'm missing the sliding hatch. Can you give me the dimensions on the slider so I can attempt to fabricate one?

Thanks
Franco

chesapeake_dreamin 07-03-2007 01:14 PM

Re: Cabin door?
 
if you never take my advice onm anything, take it on this, get a lawyer. Been there tried that and I ended up paying through the nose for an attorney in the end to undo all that went wrong. I promise it gets ugly no matter how nice she maybe right now. I'm speaking from experience here.

mgraniello 08-26-2007 12:22 PM

Re: Cabin door?
 
Hi I noticed the seats you have in your boat, and I really liked them. Where did you get them?

reelapeelin 08-27-2007 01:03 PM

Re: Cabin door?
 
Quote:

Originally Posted by mgraniello
Hi I noticed the seats you have in your boat, and I really liked them. Where did you get them?



Which ones ??? ...

mgraniello 08-28-2007 08:46 PM

Looking for a type of material ??
 
I am goin to replace the vynl covered plywood under the dash, at the stern and in front of the gas tanks. I want to replace it with something real strong that can clean eaily. I am looking for a material that is something like the material that white cutting boards are made of. I figure I need 3/ 4 X 8 sheets to do all the work. One sheet for the stern one for the fule tanks and one for the dashes. However I do not know where I can purchase it.

spareparts 08-28-2007 10:14 PM

Re: Cabin door?
 
just do a seach for starboard, and take notes, thee are planty of them( as well as uses)

reelapeelin 08-28-2007 11:10 PM

Re: Looking for a type of material ??
 
Quote:

Originally Posted by mgraniello
I am goin to replace the vynl covered plywood under the dash, at the stern and in front of the gas tanks. I want to replace it with something real strong that can clean eaily. I am looking for a material that is something like the material that white cutting boards are made of. I figure I need 3/ 4 X 8 sheets to do all the work. One sheet for the stern one for the fule tanks and one for the dashes. However I do not know where I can purchase it.



I've done a little work w/Starboard... I'd tell ya to use 1/4" S'board in front of the tanks and 3/4" under the dash...the material in front of the tanks is cosmetic and protective, but has no weight bearing on it...on the other hand, whatever you use under the dash actually SUPPORTS the dash and everything on it, including the windshield ;) ...



macojoe 08-28-2007 11:42 PM

Re: Cabin door?
 
I bought a full sheet of 3/8 and a full sheet of 3/4

Reel is right 3/4 under dash and on floor covers

3/8 on tank covers rear bulkheads and so on. Works great and easy to clean!!

Look here

http://www.wellcraftv20.com/gallery/...umName=album94

mgraniello 08-29-2007 07:48 PM

floor covering question
 
I removed the old carpet that was glued down to the deck when I got the boat. I am thinking of just going over the exsisting deck with 1/8 " perelli sheet vynl. Do they make an 1/8 inch snon slip stille starboard that I can put down over the exisiting deck in tead of the sheet vynl?

mgraniello 08-30-2007 10:33 AM

New Flooring needed.
 
i have removed the old carpet that was glued down to the deck when I got the boat. I want to go over the existing floor with a marine grade sheet vynl. Does anybody know a a real good product simlar to the starboard? I was wondering if starboard can come in a non slip 1/8 inch sheets that will match the side walls and under dash starboard i plan on using.?? any sugestions? :-/

parishht 08-30-2007 11:07 AM

Re: Cabin door?
 
Skools posted this in the links section:

http://www.wellcraftv20.com/cgi-bin/...num=1187925715


I found this place:

http://www.plasticlumberyard.com/pla...htm#Industrial

And if you do a google search, you could find other materials,
I can't find the link anymore, but I did find a place that sells
the plastic bathroom partitions
and a place that sells the textured plastic sheets.

Blue_Runner 08-30-2007 06:30 PM

Re: Cabin door?
 
I thought about doing this once...sounds about like what you are talking about.
http://docsupholstery.com/boatuphols...x/decodot.html

Hammerhead 09-21-2007 11:47 PM

Re: Cabin door?
 
I made a door of sorts to keep my neighbors cat out of the cabin. I used 1/4 ply. Nuttin' fancy but, does the job.

http://i111.photobucket.com/albums/n...g?t=1190425292


All times are GMT -5. The time now is 02:26 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.