Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   General (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=10)
-   -   New motor on the way ! (https://forums.wmpdevserver1.com/community/showthread.php?t=4021)

labii 11-02-2005 12:19 PM

New motor on the way !
 
I just ordered the last brand new in the box 2004 ,150hp Yamaha from Ed's marine . $6999+ freight . As much as I would have liked an E-TEC it was the cost in the end that made the call . I can use all of the controls , oil tank, guages ,prop, ect . from my 1994 . I think I have my old motor sold for $2100 . The guy is to bring a check on Sat and after a test run on my boat we are going to pull the engine . I should have the new one in about two weeks . While the motor is off I'm going to have some minor glass and gelcoat work done .

Pipe_Dream 11-02-2005 12:59 PM

Re: New motor on the way !
 
Minor . . . yeah, that's what I said. ;D

just kidding

Congrats, labii! Did you go with a 2-stroke or 4?

labii 11-02-2005 01:14 PM

Re: New motor on the way !
 
I went with the two stroke . At the price that I paid , I don't think that I would make up the savings in fuel cost for years . I know the 4 strokes are very good , but the 2 stroke has been good to me. I don't have to do anything but bolt the new on .

Pipe_Dream 11-02-2005 01:28 PM

Re: New motor on the way !
 
Hey, with the advances they have made in 2-strokes, my 200 burns less than my old 150 'Rude did. And hauls a___, too! 8) Sounds like you did well. Keep us posted!

Blue_Runner 11-02-2005 05:09 PM

Re: New motor on the way !
 
That's the same motor I bought new in July. Haven't had a second worth of trouble. 42mph top end on the V-21. Surprisingly quiet IMO. Sounds like a good deal. I paid close to $500 more than that.

Are they charging you for the install? The dealer charged me $150. The first dealer I asked said around $400, so I though $150 sounded pretty good.

chumbucket 11-02-2005 05:10 PM

Re: New motor on the way !
 
Good move labii. I would have made the same decision. ;)

labii 11-02-2005 05:23 PM

Re: New motor on the way !
 
The dealer here said that he would hang it and sign off on it for $200 . I could have bought an 05 for $500 more . Ed's says it is the same motor and I figure that I can use that to cover the cost of mounting it .

macojoe 11-02-2005 10:44 PM

Re: New motor on the way !
 
I would have gone yamaha!! with out evenn a second thought!!
Wish I was you!! Congrats!!

bigshrimpin 11-02-2005 11:12 PM

Re: New motor on the way !
 
Nice Labii!! You won't need to repower for another 10 years. ;D That motor is a perfect match.

macojoe 11-02-2005 11:30 PM

Re: New motor on the way !
 
Halloween is over and a ghost still shows up!!

BS fix my Gallery will ya!! ;D

chumbucket 11-02-2005 11:51 PM

Re: New motor on the way !
 
Hey snowflake! HE DID BUY A YAMAHA!!!!!!!!!!!!!!!!
Read the very first sentence. ::)

mmiklosz 11-03-2005 08:26 PM

Re: New motor on the way !
 
You got a great price. Where is Ed's Marina?

macojoe 11-03-2005 09:03 PM

Re: New motor on the way !
 
Quote:

Hey snowflake! HE DID BUY A YAMAHA!!!!!!!!!!!!!!!!
Read the very first sentence.

You talking to me Punk?? Come on put them up!! http://img.photobucket.com/albums/v1...e/5367a12e.gif

labii 11-04-2005 04:12 PM

Re: New motor on the way !
 
In VA . http://www.edsmarinesuperstore.com/

reelapeelin 11-06-2005 06:15 PM

Re: New motor on the way !
 
Labii...great move, Man...good savins' on the ''green''... ;)...those motors are real ''workhorses''...you'll luv it long time!!... 8)...

willy 11-06-2005 08:37 PM

Re: New motor on the way !
 
Hey Labil do you know what that motor weighs approx?

captbent 11-06-2005 09:04 PM

Re: New motor on the way !
 
Good luck with that New Motor

labii 11-07-2005 11:48 AM

Re: New motor on the way !
 
The 2005 catalog list it with a 426 lb . It should be here by Wed .

willy 11-07-2005 12:31 PM

Re: New motor on the way !
 
Thanks Labil, good luck I think you picked one of the best motors ever made, should last a decade no problem and that boat will fly ;)

labii 11-07-2005 01:46 PM

Re: New motor on the way !
 
Thanks Willy , I thought about buying the 200 hp but it was about $2k more . If it had been 5 years ago when I was a single man it would have been a different story .

willy 11-07-2005 02:09 PM

Re: New motor on the way !
 
I think 200 would have been overkill, little gain in performance, loss of some fuel economy and more money to boot ;)

Skools Out 11-07-2005 03:40 PM

Re: New motor on the way !
 
LOL NA you can never have enough POWER. ARH ARH ARH HORSE POWER YEAH lol give me them TWIN 225's lol

labii 12-05-2005 01:11 PM

Re: New motor on the way !
 
I was able to get out and put a little time on the new motor this weekend . It is sweet ! It is much more quite than my 1994 , Yamaha 150 . I'm also turning up an easy 5500 RPM's with the old prop . Before all I could get with a full trim was 5200-5300 . The speedo reads 46 mph and before all I could get was 42-43 . I have not been able to check it with a GPS yet . That is on my list for spring as I am going to replace my loran .

Blue_Runner 12-05-2005 03:40 PM

Re: New motor on the way !
 
:D Awesome feeling isn't it?

labii 12-05-2005 04:30 PM

Re: New motor on the way !
 
One of the best !

bigshrimpin 12-05-2005 05:23 PM

Re: New motor on the way !
 
Congrats Labii!! Any idea what your fuel burn is at cruise?

reelapeelin 12-05-2005 05:38 PM

Re: New motor on the way !
 
THUMBS way UP, Labii...you gettin' some serious WOT outta that motor...what prop you turnin'?...what's mfgr max RPM recommendation?... 8) 8) 8)...

labii 12-05-2005 06:50 PM

Re: New motor on the way !
 
15 1/4 x 17 . I kept the one that was on my old motor . Yamaha says 4500-5500 rpm range . I only had it W.O.T for a few seconds . I have less that two hours on it .

reelapeelin 12-06-2005 09:01 AM

Re: New motor on the way !
 
Same numbers as my prop...seems to be the majic prop for V20s w/150s...


All times are GMT -5. The time now is 11:19 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.