![]() |
ALLMOST THERE
|
Re: ALLMOST THERE
|
Re: ALLMOST THERE
Your going to scare all the fishies away Cap :o
|
Re: ALLMOST THERE
HERE FISHY FISHY,
|
Re: ALLMOST THERE
I like it!!!!!!!!! ;D
|
Re: ALLMOST THERE
madman......you've come a long way
|
Re: ALLMOST THERE
So wht kind of paint is it??
|
Re: ALLMOST THERE
the hull is POR15 HARDNOSE 2 PART, and the top and deck is http://www.sanitred.com/BoatRepair.htm it was like painting with tar but it is a thick rubber
|
Re: ALLMOST THERE
Hey Capt
If you dont mind me asking - where did you find a place to purchase the Sanitred .... and how many gallons and $$ did it take you ? I will need to either paint or carpet my deck this spring .... and was considering this Sanitred. I dont want a slip-resistant coating that will be too "tough" on the barefeet - like some are - and this rubberized product sounds perfect. Thanks. BTW - I like your paint scheme ! |
Re: ALLMOST THERE
just call them there realy nice http://www.sanitred.com/BoatRepair.htm
|
Re: ALLMOST THERE
i went smooth i go bare foot too ;D
|
Re: ALLMOST THERE
o it took 2 gallons for the hole top of boat i did every thing, deck, walls, top side you will need a gallon and have some left it comes in light tan too
|
Re: ALLMOST THERE
i will post a pic of the deck tomorrow
|
Re: ALLMOST THERE
|
Re: ALLMOST THERE
|
Re: ALLMOST THERE
|
Re: ALLMOST THERE
Nice very nice you can do wonderful things with a 5000 square foot garage can't you :D
|
Re: ALLMOST THERE
Lotta hard work there and it shows...Have you got a planned "SPLASH" date set?...you sure timed the season right ;)...
|
Re: ALLMOST THERE
That motor looks real nice in there!!!!!!
As for the floor, it looks great!! But if you used your boat hard for fishing like I do, Someone is going to have a cracked SKULL by the end of the season!! That has slip and fall written all over it!! :o Is your insurance all payed up?? If so I will go out with you, I need the ins money! But she has to be one of the nicest boats on here for clean up to date stuff, and that motr is great!! Nice Bildge. You should see all the leaks easy with that set up! ;D Good Luck! |
Re: ALLMOST THERE
Hey, Capt...I don't see any signs of a bilge-pump...is that beautifull motor blockin' it or what... ???...
|
Re: ALLMOST THERE
bilge pump under motor, the deck is rubber its what the navy uses and most ship builders, when i hosed of the dust i had boat shoes on you do not slip at all 100 times better then new factory deck
|
Re: ALLMOST THERE
Damm, you stole my sharks design >:( >:( >:(
Who did teh sharks design work for ya. ?? I still plan on doing the same thing. Does the decal really glow ?? |
Re: ALLMOST THERE
Was going to use the same paint, since you posted it once before, but I went with the Top Secret paint instead that you posted, but again have not used it yet. Have you used Top Secret paint at all ???
|
Re: ALLMOST THERE
I was concerned about the rubber paint below the water line. You used it above the waterline, can it be waxed, will it turn yellow or dull out. ??
Hmm we may have matching boats here soon. ;D |
Re: ALLMOST THERE
I like it BIG TIME great job
|
Re: ALLMOST THERE
Capt, That's cool....I escpecially like the way it shows up in the dark. :P to everyone who said don't do it in the thread hammer started ;D What do ya think now, hammer?
|
Re: ALLMOST THERE
JeffX, It look really cool. My mouth will be slightly bigger.
The glow stuff is really cool. ;D |
Re: ALLMOST THERE
I see what you did this past winter. You do nice work! Bill Mc ;D
|
Re: ALLMOST THERE
no waxing topside ever its rubber, if it goes dull witch it will i will not care its made to last but you can bring back the shine with a silicon wax spray, and its a fishing boat, the shark teeth are 3m high reflective its what you see on police cars the red is emron i did all the work myself with some heavy work done by my son
|
Re: ALLMOST THERE
|
Re: ALLMOST THERE
if you recoat the bottom with Black instead of blue it will be perfect!!
|
Re: ALLMOST THERE
black it going to be ;Dthanks
|
Re: ALLMOST THERE
So Capt. Give me more details, you did this all by hand. Painted red first, then added in teh teeth decals ?
Hand cutted out the teeth ? ??? ??? |
Re: ALLMOST THERE
paint the red first, i did three coats then i made a stensel for the teeth and cut them out with a razor
|
Re: ALLMOST THERE
:o Holy Crap Batman! :o I want to know what you've done with Capt Bent's boat?!? This is obviously a new boat, so where is the old one?
Dare I ask how much $$ you've got in this project? You knew it was coming.... ;D |
Re: ALLMOST THERE
Hey Cappy, I can't wait to see ya on the bay. If you see a V-20 coming hard it will be me cuz I will see you before you see me.
|
Re: ALLMOST THERE
REVMAX did you see the Bridge blow up that was cool as hell,but no fishing under or around it this year that sucks good bass there at times
|
| All times are GMT -5. The time now is 11:40 PM. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.