|
Pics for Hammer
Well, I was hoping to get some work in on the V this morning. I need to get the inner liner out before I can really get anything else going. Unfortunatly it hasn't warmed up as much as I'd like so I figured I'd take a few Pics for Hammer.... Maybe he'll cut Randleman a little slack for the next 5 minutes ;D
I get the feeling I'm doing this the hard way.... http://i5.photobucket.com/albums/y19...n/DSC00017.jpg That's ice in the bildge :-[ http://i5.photobucket.com/albums/y19...n/DSC00019.jpg Inner Liner partially seperated from Starboard stringer http://i5.photobucket.com/albums/y19...n/DSC00023.jpg Inner Liner partially seperated from Port stringer http://i5.photobucket.com/albums/y19...n/DSC00024.jpg Looking foward from the back..... uh, I mean aft... or something... http://i5.photobucket.com/albums/y19...n/DSC00026.jpg Enjoy! |
Pics for Hammer
Well, I was hoping to get some work in on the V this morning. I need to get the inner liner out before I can really get anything else going. Unfortunatly it hasn't warmed up as much as I'd like so I figured I'd take a few Pics for Hammer.... Maybe he'll cut Randleman a little slack for the next 5 minutes ;D
I get the feeling I'm doing this the hard way.... http://i5.photobucket.com/albums/y19...n/DSC00017.jpg That's ice in the bildge :-[ http://i5.photobucket.com/albums/y19...n/DSC00019.jpg Inner Liner partially seperated from Starboard stringer http://i5.photobucket.com/albums/y19...n/DSC00023.jpg Inner Liner partially seperated from Port stringer http://i5.photobucket.com/albums/y19...n/DSC00024.jpg Looking foward from the back..... uh, I mean aft... or something... http://i5.photobucket.com/albums/y19...n/DSC00026.jpg Enjoy! |
Re: Pics for Hammer
GREAT PIX, Jeff!!...but no Hammer...he's just CAMPED OUT over randleman's "V"...
Keep the pix comin' on yer project...what's the end result yer goin' for?... |
Re: Pics for Hammer
GREAT PIX, Jeff!!...but no Hammer...he's just CAMPED OUT over randleman's "V"...
Keep the pix comin' on yer project...what's the end result yer goin' for?... |
Re: Pics for Hammer
Well, it's warmed up some and I got to it! Unforunatly the more I get to it, the worse it gets! Previous owner(s) did their fair share of butchering this poor boat and now I'm paying the price... The foam I found earlier is most likely the work of a "handyman" ... I've found more of it and it doesn't appear anyone put iny thought to the fact that they were blocking the drainage of the bilge leaving any water that got through their horrible patchwork nowhere to go....expect to be absorbed by the foam.... now it's nasty!
This is where someone cut the center out to put in the foam... I think this is adding to my greif in getting the inner liner out http://i5.photobucket.com/albums/y19...n/DSC00028.jpg This is the center.... I didn't have to cut anything, I simply pried it out.... With as much as I'm using the crowbars on this boat I might need to change my username to "crowbar"....and/or make that the name of the boat... http://i5.photobucket.com/albums/y19...n/DSC00032.jpg Here's the crap I got out from it... http://i5.photobucket.com/albums/y19...n/DSC00027.jpg This is where a previous owner cut out the front of the cuddy so they could put those hoses in as well as foam as much as they could reach... Fortuantly that foam was dry... http://i5.photobucket.com/albums/y19...n/DSC00029.jpg Last but not least, here is the makeshift brace they used... It looked like they used 3" drywall screws and they filled in the heads of the screws, but didn't seal around the cut... Again, liberal use of crowbar required... Of course that just added to the list of things I'll have to fix! http://i5.photobucket.com/albums/y19...n/DSC00030.jpg At least I have more pics!!! Hey Reel, at this point I'm going for a boat that will float... Once I get this thing apart and see what I really have to work with I'll figure out how much I want to do is daydream'n vs what's realistic... ;D |
Re: Pics for Hammer
Well, it's warmed up some and I got to it! Unforunatly the more I get to it, the worse it gets! Previous owner(s) did their fair share of butchering this poor boat and now I'm paying the price... The foam I found earlier is most likely the work of a "handyman" ... I've found more of it and it doesn't appear anyone put iny thought to the fact that they were blocking the drainage of the bilge leaving any water that got through their horrible patchwork nowhere to go....expect to be absorbed by the foam.... now it's nasty!
This is where someone cut the center out to put in the foam... I think this is adding to my greif in getting the inner liner out http://i5.photobucket.com/albums/y19...n/DSC00028.jpg This is the center.... I didn't have to cut anything, I simply pried it out.... With as much as I'm using the crowbars on this boat I might need to change my username to "crowbar"....and/or make that the name of the boat... http://i5.photobucket.com/albums/y19...n/DSC00032.jpg Here's the crap I got out from it... http://i5.photobucket.com/albums/y19...n/DSC00027.jpg This is where a previous owner cut out the front of the cuddy so they could put those hoses in as well as foam as much as they could reach... Fortuantly that foam was dry... http://i5.photobucket.com/albums/y19...n/DSC00029.jpg Last but not least, here is the makeshift brace they used... It looked like they used 3" drywall screws and they filled in the heads of the screws, but didn't seal around the cut... Again, liberal use of crowbar required... Of course that just added to the list of things I'll have to fix! http://i5.photobucket.com/albums/y19...n/DSC00030.jpg At least I have more pics!!! Hey Reel, at this point I'm going for a boat that will float... Once I get this thing apart and see what I really have to work with I'll figure out how much I want to do is daydream'n vs what's realistic... ;D |
Re: Pics for Hammer
The good news is you'll have a ''blank canvas'' to do whatever you want!! ;D ...
...Name 'er 'Flat-Bar" 8) ...great pix...keep 'em comin'...ya know, this is a great opportunity to go back w/ a taller if not full transom, if that would mean anything to ya ;) ... |
Re: Pics for Hammer
The good news is you'll have a ''blank canvas'' to do whatever you want!! ;D ...
...Name 'er 'Flat-Bar" 8) ...great pix...keep 'em comin'...ya know, this is a great opportunity to go back w/ a taller if not full transom, if that would mean anything to ya ;) ... |
Re: Pics for Hammer
wow...damn dude..you lookin at a total restore on that boat......how much $$ are you into it already if ya dont mind me askin? cuz that "blank canvas" will cost you as much as getting another thats doesnt need all that work...there's 3 V-20's in the trading post now.
|
Re: Pics for Hammer
wow...damn dude..you lookin at a total restore on that boat......how much $$ are you into it already if ya dont mind me askin? cuz that "blank canvas" will cost you as much as getting another thats doesnt need all that work...there's 3 V-20's in the trading post now.
|
Re: Pics for Hammer
I'm in the boat for $500. I've got a couple hundred in some materials and lots of hours in labor with far more to come... :-/
Trailer I bought seperatly and if things go south w/ boat, will be sold seperatly.... But that's plan "Z" :o I'm planning on closing the transom in. I just have to figure out how I want to modify the cap. I'm thinking the current splashwell would make a great place for a live baitwell... More daydreaming at the moment ::) Well, I guess I'll go bang and pry on the boat some more. 8) |
Re: Pics for Hammer
I'm in the boat for $500. I've got a couple hundred in some materials and lots of hours in labor with far more to come... :-/
Trailer I bought seperatly and if things go south w/ boat, will be sold seperatly.... But that's plan "Z" :o I'm planning on closing the transom in. I just have to figure out how I want to modify the cap. I'm thinking the current splashwell would make a great place for a live baitwell... More daydreaming at the moment ::) Well, I guess I'll go bang and pry on the boat some more. 8) |
Re: Pics for Hammer
Yo "Crow-Bar". Ahhhh relief. Thanks for the pics. brother. ;D ;D ;D ;D. Great to see you working on her. SkOOL is the man to help you each step of teh way. Wish you were close, I would come down with a few crowbars and digging bars as well. Spring is just around te corner. Keep working. ;D
|
Re: Pics for Hammer
Yo "Crow-Bar". Ahhhh relief. Thanks for the pics. brother. ;D ;D ;D ;D. Great to see you working on her. SkOOL is the man to help you each step of teh way. Wish you were close, I would come down with a few crowbars and digging bars as well. Spring is just around te corner. Keep working. ;D
|
Re: Pics for Hammer
Thanks for watching out for me JeffXJ.
|
Re: Pics for Hammer
Thanks for watching out for me JeffXJ.
|
Re: Pics for Hammer
We have inner liner seperation!!!!! YAHOOOOO! *;D Noth'n like the noise of a few seconds worth of sucking followed by a big POP! Kinda like..... nevermind *::)
Anyway, here are the final pics of Operation Seperation http://i5.photobucket.com/albums/y19...n/DSC00038.jpg http://i5.photobucket.com/albums/y19...n/DSC00034.jpg http://i5.photobucket.com/albums/y19...n/DSC00036.jpg And finally, it's beer o'clock HERE! .... Incase anyone was wondering, here's the cheesy guy posting all this crap! *::) ;D http://i5.photobucket.com/albums/y19...n/DSC00043.jpg |
Re: Pics for Hammer
We have inner liner seperation!!!!! YAHOOOOO! *;D Noth'n like the noise of a few seconds worth of sucking followed by a big POP! Kinda like..... nevermind *::)
Anyway, here are the final pics of Operation Seperation http://i5.photobucket.com/albums/y19...n/DSC00038.jpg http://i5.photobucket.com/albums/y19...n/DSC00034.jpg http://i5.photobucket.com/albums/y19...n/DSC00036.jpg And finally, it's beer o'clock HERE! .... Incase anyone was wondering, here's the cheesy guy posting all this crap! *::) ;D http://i5.photobucket.com/albums/y19...n/DSC00043.jpg |
Re: Pics for Hammer
Man, great job. Makes me feel much better about needing to fix a few things on my V.
|
Re: Pics for Hammer
Man, great job. Makes me feel much better about needing to fix a few things on my V.
|
Re: Pics for Hammer
Well the god news is when your done you will have a brand new boat for 1/4 of the price!!
Keep the pic coming! all except of that crazy guy in the last one!! ;) |
Re: Pics for Hammer
Well the god news is when your done you will have a brand new boat for 1/4 of the price!!
Keep the pic coming! all except of that crazy guy in the last one!! ;) |
Re: Pics for Hammer
Thanks Randleman and MJ. I'm surprised the camera survived that last one.... ;D
|
Re: Pics for Hammer
Thanks Randleman and MJ. I'm surprised the camera survived that last one.... ;D
|
Re: Pics for Hammer
Great Job Jeff. Drink a cold one on us. So whats next. ;)
|
Re: Pics for Hammer
Great Job Jeff. Drink a cold one on us. So whats next. ;)
|
Re: Pics for Hammer
good job jeff! i knew you could do it! lol ;D 635-6640 is my cell if ya need help lifting it out
|
Re: Pics for Hammer
good job jeff! i knew you could do it! lol ;D 635-6640 is my cell if ya need help lifting it out
|
Re: Pics for Hammer
or 1-800 hotbabesloveulong. :P
|
Re: Pics for Hammer
or 1-800 hotbabesloveulong. :P
|
Re: Pics for Hammer
dam, that is a lot of work, you hoping to get her ready for the spring?
|
Re: Pics for Hammer
dam, that is a lot of work, you hoping to get her ready for the spring?
|
Re: Pics for Hammer
I found that my V was just setting on the stringers and that it poped out pretty easy. Why did you have to cut up so much of the inner liner before removing it. I used a pulley in a tree with a truck and just lifted it out and pused the trailer and bottom of boat out from under.
|
Re: Pics for Hammer
I found that my V was just setting on the stringers and that it poped out pretty easy. Why did you have to cut up so much of the inner liner before removing it. I used a pulley in a tree with a truck and just lifted it out and pused the trailer and bottom of boat out from under.
|
Re: Pics for Hammer
Think JeffX found that all the sprayed in foam, may have glued her together, making a theseperation more of a pain.
|
Re: Pics for Hammer
Think JeffX found that all the sprayed in foam, may have glued her together, making a theseperation more of a pain.
|
Re: Pics for Hammer
This whole task started as a transom repair. That's why the back of the liner is cut out (and it was my first time ::) ) The more I looked, the more I didn't like the rest of what I saw. Especially the foam because what I could get my hands on was soaked and nasty. This was mainly due to whoever put the foam in cut out a section of the floor between the seats and didn't do a good job putting it back together.
The two sections that have the 2x4s sticking out of them I cut because that's the area with the most and wettest foam which was acting almost like glue. As for lifting it out, I don't have a tree to use, but I'm working on a solution. ;D |
Re: Pics for Hammer
This whole task started as a transom repair. That's why the back of the liner is cut out (and it was my first time ::) ) The more I looked, the more I didn't like the rest of what I saw. Especially the foam because what I could get my hands on was soaked and nasty. This was mainly due to whoever put the foam in cut out a section of the floor between the seats and didn't do a good job putting it back together.
The two sections that have the 2x4s sticking out of them I cut because that's the area with the most and wettest foam which was acting almost like glue. As for lifting it out, I don't have a tree to use, but I'm working on a solution. ;D |
Re: Pics for Hammer
What I was asking about is that it looks as if you have cut the whole rim that goes around the top of inner liner. Its the section at the top of the inner liner that turn out then down where it screws into the hull.
|
Re: Pics for Hammer
What I was asking about is that it looks as if you have cut the whole rim that goes around the top of inner liner. Its the section at the top of the inner liner that turn out then down where it screws into the hull.
|
| All times are GMT -5. The time now is 06:08 AM. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.